Eagle 9" Suncover This 9-inch cover is designed for Lowrance Eagle displays. Features: Protects the marine environment

Eagle 4" Suncover This 4-inch cover is designed for Lowrance Eagle displays. Features: Protects the marine environment

Eagle 5" Suncover This 5-inch cover is designed for Lowrance Eagle displays. Features: Protects the marine environment

Eagle 7" Suncover This 7-inch cover is designed for Lowrance Eagle displays. Features: Protects the marine environment

Eagle 9 with TripleShot T/M Transducer & Discover OnBoard Chart Eagle® was born to make fishing as simple and enjoyable as possible. Easy to use and quick to install, this model features a TripleShot™ HD Transducer with FishReveal technology and autotuning for a quick and optimal setup. An IPS screen provides higher resolution and visibility from all angles. This model also comes bundled with high-resolution C-MAP® Discover OnBoard™ charts for the US and Canada. Easy to Use Sonar TripleShot HD Have the best chance of finding fish with underwater views to the side and below the boat, all with one transducer. TripleShot™ HD features the fish-finding capability of wide-angle high CHIRP sonar and high-resolution images of fish-holding structures from SideScan and DownScan Imaging™. FishReveal™ Take the guesswork out of fish identification with FishReveal, combining DownScan with CHIRP for unparalleled target separation and identification.  Autotuning Simple autotuning sonar gives users the optimal settings from the start, so users don’t have to spend time trying to find them. Detailed Charting C-MAP Discover OnBoard US/Canada Bundle Spend more time fishing and less time searching, with high-resolution C-MAP® Discover OnBoard charts included for the US and Canada. With Eagle, users have all the details needed to discover and navigate to the best fishing spots, faster. Genesis Live Know the local waters better than anyone with the ability to create custom ½-foot contour maps of the local lake or uncharted water in real-time. Designed for Fishing IPS Screens See clearly wherever users go with an IPS screen, offering improved resolution, clarity, and visibility, even with polarized sunglasses in direct sunlight. Connector System Set up in an instant with Eagle’s improved twist-locking connector, promising easy installation and removal every time. One-Year Warranty Lowrance's priority is to give users superior quality products and a stress-free time on the water. Enjoy the feeling of fishing with peace of mind, thanks to Lowrance's one-year warranty guarantee. Features: Enhanced TripleShot™ HD Transducer with Autotuning Sonar C-MAP® Discover OnBoard™ charts for the US and Canada IPS screen, viewable from all angles, even in polarized glasses Reliable twist-lock connector system for easy installation in any boat or kayak SD card slot for software updates, Genesis Live recording, and charting add-ons. See fish hiding in cover with FishReveal™ mode Increase contrast and viewability with imaging color palettes What’s in the Box? Eagle 9 Display TripleShot HD Transducer Tripleshot Bracket C-MAP Discover OnBoard™ charts for the US and Canada Power Cable, with fuse and connectors Eagle 9 Bracket and mounting hardware Spotlight Feature Icons: CHIRP DownScan FishReveal IPS Screens Autotuning Sonar

Eagle 9 with TripleShot Transducer & Inland Charts Eagle® was born to make fishing as simple and enjoyable as possible. Easy to use and quick to install, this model features a TripleShot™ HD Transducer with FishReveal technology and autotuning for a quick and optimal setup. An IPS screen provides higher resolution and visibility from all angles. This model also comes pre-loaded with high-resolution C-MAP® inland charts for the US, with coverage of over 17,000+ American lakes. Easy to Use Sonar TripleShot HD Have the best chance of finding fish with underwater views to the side and below the boat, all with one transducer. TripleShot™ HD features the fish-finding capability of wide-angle high CHIRP sonar and high-resolution images of fish-holding structures from SideScan and DownScan Imaging™. FishReveal™ Take the guesswork out of fish identification with FishReveal, combining DownScan with CHIRP for unparalleled target separation and identification.  Autotuning Simple autotuning sonar gives users the optimal settings from the start, so users don’t have to spend time trying to find them. Detailed Charting C-MAP Embedded Inland Spend more time fishing and less time searching with pre-loaded high-resolution C-MAP® Embedded inland charts for the US. Get coverage of over 17,000+ American lakes. With Eagle, users have all the details needed to discover and navigate to the best fishing spots, faster. Genesis Live Know the local waters better than anyone with the ability to create custom ½-foot contour maps of the local lake or uncharted water in real-time. Designed for Fishing IPS Screens See clearly wherever users go with an IPS screen, offering improved resolution, clarity, and visibility, even with polarized sunglasses in direct sunlight. Connector System Set up in an instant with Eagle’s improved twist-locking connector, promising easy installation and removal every time. One-Year Warranty Lowrance's priority is to give users superior quality products and a stress-free time on the water. Enjoy the feeling of fishing with peace of mind, thanks to Lowrance's one-year warranty guarantee. Features: Enhanced TripleShot™ HD Transducer with Autotuning Sonar C-MAP® inland charts for the US, feat. Genesis® Live IPS screen, viewable from all angles, even in polarized glasses Reliable twist-lock connector system for easy installation in any boat or kayak SD card slot for software updates, Genesis Live recording, and charting add-ons See fish hiding in cover with FishReveal™ mode Increase contrast and viewability with Imaging color palettes What’s in the Box? Eagle 9 Display TripleShot HD Transducer Tripleshot Bracket Power Cable, with fuse and connectors Eagle 9 Bracket and mounting hardware Spotlight Feature Icons: CHIRP DownScan FishReveal IPS Screens Autotuning Sonar

Eagle SplitShot Transom Mount Transducer with 20 ft. Cable Wide Angle, High-Res Images  Get the best underwater views below the boat with SplitShot HD, featuring the fish-finding capability of wide-angle high CHIRP sonar and the high-resolution images of fish-holding structure from DownScan Imaging™. Unlock FishReveal™   Take the guesswork out of fish identification with FishReveal, combining DownScan with CHIRP for unparalleled target separation and identification. Exclusive to Lowrance Eagle® SplitShot HD is exclusive to Lowrance Eagle, Lowrance's most accessible and easy-to-use fishfinder yet.  Includes: 20 ft. cable

Eagle TripleShot Transom Mount Transducer Three Technologies, One Transducer Have the best chance of finding fish with underwater views to the side and below the boat, all in one transducer. TripleShot HD Transducer features the fish-finding capability of wide-angle high CHIRP sonar and the high-resolution images of fish-holding structures from SideScan and DownScan Imaging™ for complete visibility to the side and below the boat.   Unlock FishReveal™   Take the guesswork out of fish identification with FishReveal, combining DownScan with CHIRP for unparalleled target separation and identification.    Exclusive to Lowrance Eagle®  TripleShot HD Transducer is exclusive to Lowrance Eagle, Lowrance’s most accessible and easy-to-use fishfinder yet.

MKR-US2-9 Lowrance / Eagle Adapter Cable Model:#1852069 Universal Sonar 2 delivers advanced water temperature sensing and DualBeam PLUS technology for the best view of the waters below. These adapters connect your trolling motor to your favorite brand of sonar or fishfinder (200 kHz and 200/83 kHz DualBeam PLUS™ compatible). Shielded, IP68-rated waterproof connectors are metal tipped to prevent sonar interference. Compatible Models Eagle Cuda 168, Cuda 168EX, Cuda 128, Cuda 240 S/GPS, Cuda 240i S/GPS, Cuda 242, Cuda 250, Cuda 300,Cuda 350, FishElite 320, FishElite 480, FishElite 500C, FishElite 520C, FishElite 640, FishElite 642C,FishMark 320, FishMark 480, FishMark 500C, FishMark 640C, SeaFinder 240DF, SeaFinder 245DS,SeaFinder 250DF, SeaFinder 320DF, SeaFinder 480DF, SeaFinder 500CD, SeaFinder 640C, SeaFinder642C, SeaCharter 320DF, SeaCharter 480DF, SeaCharter 500CDF, FishEasy 2*, FishEasy 245DS,FishEasy 250DS, FishEasy 320C, FishEasy 350C Lowrance X-47, X-47EX, X-50DS, X-67C, X-86DS, X-96, M-52i, M-56, M-56i, M-68C, M-68i, Elite-5, Elite-5X, Mark-5X, Mark-5X PRO

PedestalPod with RAM Mount Pre-Cut for Lowrance HDS-9 Gen2 Touch, HDS-9 Gen3 & HDS Carbon 9 - Carbon Black PedestalPod with RAM Mounts is specifically designed for mounting the fishfinder near the bow on Bass Boats. Built on the foundation of NavPods popular range of waterproof housings for marine electronics, PedestalPods position your fishfinder/chartplotter at an easy to reach 20” off the deck. This allows the user easy access to the display for changes to range, zoom or even control the trolling motor. There is a big difference between reaching down to a height off the deck of 20” to control your fishfinder compared to reaching all the way down to the deck when it was only bracket mounted.  PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal. This offers protection of your fishfinder/chartplotter from the harshest of wet boating conditions.  This protection assures reliability and longevity of your marine electronics. PedestalPod with RAM Mounts utilizes the proven RAM Mounting system with the large 2.25” rubber “D” size ball and the RAM pin-lock security solution.  RAM Mounts are designed with a patented rubber ball and socket system that allows an almost infinite amount of ways to position the angle of the fishfinder for that precise position of viewing. When you might be trailering, or storing the boat, the display can fold flat onto the deck with only 10” of clearance.  This will allow most boat covers to fit over the PedestalPod when not in use. Your fishfinder is easily flush mounted into the pre-cut face of the NavPod. There are pre-cut models available for 7”, 9” and 12” LCD displays from all major marine electronic manufacturers. PedestalPods are waterproof housings for marine electronics specifically designed for bass boats. PedestalPods are better than bracket mounting. Very sturdy and secure, yet clean and attractive, this mount provides protection of your marine electronics from the harshest of wet boating conditions. PedestalPods provide the convenience of height for accessibility and added security with protection from theft. PedestalPods position your fishfinder/chartplotter at 20” off the deck and located near the bow and at a 45-degree angle for ease of viewing while fishing. This allows the user to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even control the trolling motor. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. They keep harsh spray off the electrical connections on the back of your fishfinder/chartplotter assuring reliability and longevity of your marine electronics. Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PedestalPod. The heavy duty, black powder coated aluminum pedestal tube is 3” in diameter with a 5” round base and has a large 1.75” opening providing plenty of room for running wires and connectors internally for a very clean look. It provides protection for wires and connectors from water intrusion, UV exposure or damage from just getting kicked or snagged and ripped out of their sockets. All NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PedestalPods are available pre-cut for 7”, 9” and 12” LCD displays from all major marine electronic manufacturers. Constructed out of durable ABS like all Gen3 NavPods, black carbon PedestalPods have the same high gloss finish with UV stability. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods. PedestalPods – Protection, Convenience, Security

PP4600-03 PowerPod Pre-Cut for Lowrance Elite-9 CHIRP 9" Fishfinder/Chartplotter PowerPods are designed for the serious boater who is blasting offshore. He demands the most from his boat and his electronics. He needs a tough and rugged mount to protect vital electronics from the harshest of offshore boating conditions. Sturdy and secure, yet clean and attractive, PowerPods are better than bracket mounting. Over 70 Pre-Cut PowerPods are available for all popular manufacturers products. 1.8" opening in the swivel tube provides plenty of room for running wires and connectors through. PowerPods are positioned at a 20 degree tilt back viewing angle. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

PowerPod Pre-Cut for Lowrance HDS-9 Gen2 Touch, HDS-9 Gen3 & HDS Carbon 9  PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base. PowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability. NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics. Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure, or damage from getting snagged and ripped out of their sockets. All NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up its commitment to quality by offering a 10-year warranty on all Gen3 NavPods. PowerPods: Protection, Convenience, Security.

PP4600-05 PowerPod Pre-Cut for Lowrance HOOK-9 Fishfinder/Chartplotter PowerPods are designed for the serious boater who is blasting offshore. He demands the most from his boat and his electronics. He needs a tough and rugged mount to protect vital electronics from the harshest of offshore boating conditions. Sturdy and secure, yet clean and attractive, PowerPods are better than bracket mounting. Over 70 Pre-Cut PowerPods are available for all popular manufacturers products. 1.8" opening in the swivel tube provides plenty of room for running wires and connectors through. PowerPods are positioned at a 20 degree tilt back viewing angle. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

PED4600-03 PedestalPod Pre-Cut for Lowrance Elite-9 CHIRP 9" Fishfinder/Chartplotter - Carbon Black PedestalPods are better than bracket mounting. Very sturdy and secure, yet clean and attractive, this mount provides protection of your fishfinder/chartplotter from the harshest of wet boating conditions. PedestalPods provide the convenience of easily reaching and controlling the fishfinder/chartplotter while providing added security with protection from theft. PedestalPods position your fishfinder/chartplotter at 20" off the deck and located near the bow and at the 45° angle for ease of viewing while fishing. This allows the user to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even control the trolling motor. PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal keeping spray off the electrical connections on the back of your fishfinder/chartplotter assuring reliability and longevity of your marine electronics. Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the NavPod. The heavy duty, powder coated aluminum pedestal tube is 3” in diameter with a 5” round base and has a large 1.75” opening providing plenty of room for running wires and connectors internally for a very clean look and provides protection for wires and electrical connectors from water intrusion, UV exposure or damage from just getting kicked or snagged and ripped out of their sockets. NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. There are pre-cut models available for 7", 9" and 12" LCD displays from all major marine electronic manufacturers.

PED4600-05 PedestalPod Pre-Cut f/Lowrance HOOK-9 Fishfinder/Chartplotter - Carbon Black PedestalPods are better than bracket mounting. Very sturdy and secure, yet clean and attractive, this mount provides protection of your fishfinder/chartplotter from the harshest of wet boating conditions. PedestalPods provide the convenience of easily reaching and controlling the fishfinder/chartplotter while providing added security with protection from theft. PedestalPods position your fishfinder/chartplotter at 20" off the deck and located near the bow and at the 45° angle for ease of viewing while fishing. This allows the user to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even control the trolling motor. PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal keeping spray off the electrical connections on the back of your fishfinder/chartplotter assuring reliability and longevity of your marine electronics. Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the NavPod. The heavy duty, powder coated aluminum pedestal tube is 3” in diameter with a 5” round base and has a large 1.75” opening providing plenty of room for running wires and connectors internally for a very clean look and provides protection for wires and electrical connectors from water intrusion, UV exposure or damage from just getting kicked or snagged and ripped out of their sockets. NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. There are pre-cut models available for 7", 9" and 12" LCD displays from all major marine electronic manufacturers.