PD-WBL Trolling motor-mount or shoot-thru-hull, pod type transducer. Works with: LCX-110C, LCX-111C HD, LCX-15CI, LCX-15CT, LCX-15MT, LCX-16CI, LCX-17M, LCX-20C, LCX-25C, LCX-26C HD, LMS-332C, LMS-334C iGPS, X102C, X125, X135, X5

PDT-WBL Trolling motor-mount, pod type with built-in temperature sensor. Works with: LCX-110C, LCX-111C HD, LCX-17M, LCX-20C, LCX-25C, LCX-26C HD, LMS-332C, LMS-334C iGPS, LMS-480, X102C, X125, X135, X52

XTM 9 DI 25 T Trolling Motor Mount Transducer Trolling Motor Mount Transducer Down Imaging™/DualBeam Plus™, 75°/45°, 455/800 kHz (DI) and 25°/16°, 200/455 kHz, with built in temperature, 15' Cable. Low profile design minimize snags. Easy installation, all hardware included. For Use With: 700 Series, 788ci HD DI Combo 500 Series, 597ci HD DI Combo, 596c HD DI, 587ci HD DI, 581i HD DI, 571 HD DI, 570 DI, 561 DI 300 Series, 386ci DI Combo, 385ci DI Combo, 346c DI Combo, 345c DI Combo WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

XTM 9 WIDE DI 20 T Trolling Motor Mount Transducer Low profile design minimizes snags. Easy installation and all hardware is included. Features: Trolling Motor Transducer Down Imaging® Transducer 200/455kHz Low Profile Design Minimizes Snags Easy Installation All Hardware Included Built-in temperature 15' cable Compatibility: 1100 Series™: 1158c DI Combo 900 Series™: 958c DI Combo 800 Series™: 858c DI Combo WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

  Lowrance Ghost Trolling Motor - Now In Stock at CLR Marine !   Quiet by name, powerful by design, the Lowrance Ghost freshwater trolling motor helps anglers fish longer, run faster, and move in closer without spooking fish. Ghost’s revolutionary propulsion technology and brushless motor generate the most thrust and the longest run time of any trolling motor on the market. With integrated Lowrance sonar options, GPS anchoring, and a three-year warranty, there’s no reason not to believe in Ghost.     Own Your Spot - Ghost’s powerful and precise anchoring lets you anchor your boat on a waypoint, at your current location, or anywhere on the map – regardless of wind conditions – so you can spend more time fishing and less time maintaining your position. With a simple press of your foot, you can lower or raise your Power-Pole® shallow-water anchor or anchor at your current location using the quick access keys built into the Ghost foot pedal.     Total Integration - Steer your boat, adjust your speed, set up route navigation, or anchor at your current location with full touchscreen control from HDS LIVE, HDS Carbon, and Elite Ti2 displays. Our Pro Team anglers asked us to build a trolling motor with full integration capability, including a foot pedal that could serve as an extension of the display’s user interface. We listened – delivering an all-everything pedal with easily accessible Anchor and Heading Mode quick access keys, plus programmable shortcut keys that can be used for saving waypoints and controlling Power-Pole shallow water anchors.   Additional Key Features:   Reliable Silent Operation Fastest Top-End Speed Total Integration with HDS LIVE, HDS Carbon, and Elite Ti² Fly-By-Wire Steering Plug-and-Play Lowrance sonar Configurable Foot-pedal Interference Free Flexible Installation 360° Breakaway Mount Easy to Stow and Go       Specials    Closeouts    Remanufactured    Rebates

Trolling Motor Transducer Trolling Motor Mount Transducers are designed to mount on to the body of most trolling motors. A low profile shape reduces drag in the water and minimizes interference with weeds. Trolling Motor Transducers are often used in conjunction with the standard Transom Mount Transducer and connected by a switch to allow the fishfinder to display information from either the transom or the trolling motor. Some Transom Mount Transducers can be converted to Trolling Motor Mount by purchasing a Trolling Motor Adapter. Description: Trolling Motor Transducer with Temperature Sensor, Hydrodynamic, dual beam, 20 and 60 degree cone angles, 200/83 kHz. Includes 15' cable, trolling motor mounting hardware. For Use With: Piranha 5, Legend ID40, Matrix 15, Matrix 17, Matrix 25, Matrix 17, Matrix 55, Matrix 65, Matrix 67, FF515, FF535, FF565 WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GT22HW-TM Plastic, TM or Trolling Motor Transducer, High Wide CHIRP/CHIRP DownVü - 455/800kHz, 500W, 8-Pin GT22HW-TM transducer is perfect for freshwater fishermen who want CHIRP traditional sonar and CHIRP DownVü scanning sonar. This transom or trolling motor mounted transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below the boat. The 8-pin transducer features high wide band CHIRP traditional sonar (150-240 kHz) and has a power rating of 250 W. The CHIRP DownVü (455/800 kHz) element has a power rating of 500 W. GT22HW-TM is ideal for mounting to a trolling motor due to its compact size. For installation, follow the included instructions carefully to avoid damaging your boat. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Garmin STRIKER™ 4 Fishfinder Worldwide Version with 77/200kHz - 4-Pin Transducer with Transom & Trolling Motor Mounts 3.5-inch CHIRP Fishfinder with GPS Easy-to-use 3.5-inch color fishfinder with built-in, high-sensitivity GPS Find fish; mark and return to hot spots, docks and ramps Convenient keypad operation Includes CHIRP (77/200kHz) sonar transducer; transmit power (200W RMS)/(1,600W peak-to-peak) Upgrade to high performance CHIRP with a GT8 or GT15 transducer (each sold separately) Multi-language capability Finding fish is easier than ever with STRIKER 4 fishfinder. Mark and return to your hot spots, boat ramps and docks, and share your favorite waypoints and routes with other STRIKER and echoMAP_ combos. Smooth Scaling_ graphics provide uninterrupted imagery when switching between depth-range scales. Sonar history rewind allows you to scroll back through sonar images to mark waypoints you originally may have missed. Plus, it has a built-in flasher and displays speed data. Includes tilt/swivel mount, CHIRP (77/200 kHz) transducer with transom and trolling motor mounting hardware and cable. For high-performance CHIRP, purchase a GT8 or GT15 transducer (each sold separately). Experience the Clarity of CHIRP STRIKER 4 fishfinder includes a Garmin CHIRP (77/200 kHz) transducer, which provides a visibly higher level of clarity and detail for fish and structure than traditional 77/200 kHz transducers. Instead of sending just 1 single frequency, CHIRP sends a continuous sweep of frequencies, ranging from low to high, then interprets them individually upon their return. Since the frequencies provide a wider range of information, CHIRP sonar technology can create crisper fish arches with greater target separation. You also can upgrade to high-performance Garmin CHIRP technology, which provides crystal-clear sonar images with even more remarkable target separation and resolution from shallow to deeper depths. For better fishing, bottom contours are more visible, even at higher speeds, and signal noise can be suppressed at greater depths to provide a more timely interpretation of what's below. Mark Spots with High-sensitivity GPS Unlike regular fishfinders, STRIKER fishfinders have built-in, high-sensitivity GPS to locate your current position quickly and precisely, then maintain your GPS location anywhere you go on the lake. More importantly, they allow you to mark spots where the fish are biting so you can return to them again in the future. You also can mark docks, boat ramps and other locations on the lake. Just follow the path created on your screen to return to them whenever you wish. Navigate Easily with Waypoint Map Since the STRIKER fishfinder series includes high-sensitivity GPS, you can see your position in relation to waypoints you have marked. Use the waypoint map to easily view, mark and navigate to locations such as brush piles, stumps and docks. It's also a great tool for finding your way back to the boat ramp. Check Your Speed on Screen Check Your Speed on Screen You can quickly and easily see your boat's speed on the screen of your STRIKER fishfinder. It's a great tool to make sure you are trolling at the right speed for the lure you're using and for a particular fish species. It's also a good way to tell if you are going the right speed in wake-controlled areas. Fish Vertically with Built-In Flasher STRIKER provides you with both a fishfinder and flasher all in 1 unit. Anytime you are stationary fishing, such as ice fishing or jigging for crappie, the built-in flasher will show you the bottom, whether it is solid or muddy, your jig or weighted bait, and the depth of fish as they swim into the sonar beam. You can even watch how high your jig is being lifted and dropped and whether fish move toward or away from it. Take Your Fishfinder Anywhere A portable kit is available to protect and carry your STRIKER fishfinder with GPS, so it's perfect for kayak, canoe or ice fishing. It includes a sealed, rechargeable battery with charger, built-in transducer cable management and storage and suction cup transducer mount and float. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Trolling Motor Mount - 4/8-Pin Easily attach your compatible 4- or 8-pin scanning transducer to the trolling motor of your boat with this mount. Its low-profile design provides ultimate protection from underwater obstructions and easy mounting. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Trolling Motor Mount for HV-100 Raymarine's Trolling Motor Mount bracket for the HV-100 transducer. 

Trolling Motor Mount Easily attach your compatible scanning transducer to the trolling motor of your boat. The low-profile design of the mount provides ultimate protection from underwater obstructions and easy mounting. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Trolling Motor Mount f/GT36 and GT56  Easily attach your compatible 4- or 8-pin scanning transducer to the trolling motor of your boat with this mount. Its low-profile design provides ultimate protection from underwater obstructions and easy mounting.

Trolling Motor Mount for MK, Garmin, Rhodan, & Power Pole The Sea Swivel is a heavy-duty marine-grade pivoting bracket designed to maneuver a trolling motor in the correct position while being deployed. This bracket also has the benefit of being able to adjust the stowed position to match the angle of any boat. That means no more anchor hatches covered up and no more trolling motorheads hanging off the side of the boat. All that is needed is an 8" x 8" flat mounting surface and access under the gunwale to tighten the nut. During installation, it is recommended that users apply teff-gel or marine-grade grease to the main bolt threads and the bearing assembly. Features: Maneuverability and Positioning The Sea Swivel offers a heavy-duty pivoting bracket that allows users to easily maneuver the trolling motor into the correct position while deployed. This is especially useful for maintaining proper control and direction while fishing or navigating in different conditions. Adjustable Stowed Position The ability to adjust the stowed position of the trolling motor to match the angle of the boat is a significant advantage. This means that the trolling motor won't interfere with anchor hatches or hang off the side of the boat when not in use, enhancing the boat's aesthetics and functionality. High-Quality Materials The use of 7075T6 aluminum alloy, commonly found in the aerospace industry, provides peak strength and ensures the Sea Swivel's durability. This material choice suggests that the product is designed to withstand the rigors of marine environments and provide longevity. Corrosion Resistance The anodized finish is designed to protect the Sea Swivel from the harsh marine environment, which typically includes exposure to saltwater and other corrosive elements. This coating enhances the product's ability to resist rust and other forms of corrosion over time. Stainless Lock Pin and Hardware The utilization of all 316 stainless lock pins and mounting hardware further enhances the product's resistance to corrosion, as 316 stainless steel is known for its exceptional corrosion resistance properties, making it well-suited for marine applications. Backing Plate for Strength The inclusion of a pre-cut backing plate to be placed under the mounting surface is a smart design choice. This additional plate strengthens the installation area, reducing the risk of damage or failure due to stress or strain over time. Easy Installation The patent-pending design and single-bolt mounting system contribute to streamlined installation processes. This can be a significant selling point for customers, as it saves time and effort during setup. *It is recommended that users apply teff-gel or marine-grade grease to the main bolt threads and the bearing assembly. Compatibility The Sea Swivel stands out as a versatile solution seamlessly accommodating many makes, models, and sizes of trolling motors. It makes installation a breeze and comes pre-drilled for the quick-release brackets listed below: Minn Kota RTA 54/62 (fits all 36V permanent magnet motors) Minn Kota RTA 55/56 (fits all new Brushless/Quest motors) Minn Kota RTA17 (fits all 24V motors for smaller units) Also fits quick-release mounts for the *Garmin Kraken 24v/36v Rhodan large mount 6 bolt 36v 96/108 Rhodan smaller mount 4 bolt 24v Power Pole Move PV 36V/24V Lifetime Warranty Sea Swivel offers a limited lifetime warranty. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Ghost® Trolling Motor 47" Shaft for 24V or 36V Systems Ultra-Quiet Ghost Trolling Motor - Quiet by Name. Powerful by Design The Lowrance Ghost® freshwater trolling motor helps anglers fish longer, run faster and move in closer without spooking fish. Ghost’s revolutionary propulsion technology and brushless motor generate the most thrust and the longest run time of any trolling motor on the market. With integrated Lowrance sonar options, GPS anchoring, and a three-year warranty, there’s no reason not to believe in Ghost. Lowrance put their 60-plus years of innovation and marine electronics expertise to work in designing the Lowrance Ghost freshwater trolling motor. After years of researching when and why trolling motors fail, we went to work to exceed those standards, building Ghost in-house, from scratch. Four years and 10,000 testing hours later, we have delivered the quietest, most reliable, and most powerful trolling motor on the market. Reliable, rugged, and built to last, the ultra-quiet Lowrance Ghost freshwater trolling motor lets anglers fish longer, run faster and move in closer without spooking fish. Ghost has a revolutionary brushless motor with the most thrust and the longest run time of any trolling motor on the market. With integrated Lowrance sonar options, waypoint anchoring, and a three-year warranty, Ghost is the standard for your trolling motor upgrade. Ghost Delivers 25% More Thrust Than Competitor Trolling Motors  Ghost gives you the power to do more with your trolling motor. Leave Ghost deployed to zoom across a wide cove with up to 25 percent more thrust than competing models. Ghost's brushless motor delivers 60 percent better run-time efficiency, so you can enjoy the best top-end speed and acceleration without sacrificing battery life. Stay out later and run it harder – you will fish longer with Ghost. Incredible Performance Zoom from spot to spot or zip across the cove with up to 25 percent more thrust than competing models putting out 120 pounds of thrust at 36 volts, and 97 pounds at 24 volts. Ghost’s brushless motor also delivers 60 percent better run-time efficiency, so you can enjoy the best top-end speed and acceleration without sacrificing battery life. Stay out later and run it harder – you will fish longer with Ghost.  Silent Operation So silent, you’ll wonder if it’s running, Ghost allows you to move in closer than ever before with its ultra-quiet brushless motor. Fish will never hear you coming. Own Your Spot Ghost’s powerful and precise anchoring lets you anchor your boat on a waypoint, at your current location, or anywhere on the map – regardless of wind conditions – so you can spend more time fishing and less time maintaining your position. With a simple press of your foot, you can lower or raise your PowerPole® shallow-water anchor or anchor at your current location using the quick access keys built into the Ghost foot pedal. Plug-and-Play Lowrance Sonar Ghost is packaged with an HDI nosecone transducer, giving you the high-level performance of Lowrance CHIRP sonar and DownScan Imaging™ right out of the box. Anglers who want to step up to the extreme, high-resolution views beneath and to the sides of the boat can add an optional Active Imaging™ 3-in-1 nosecone with Lowrance CHIRP, SideScan, and DownScan Imaging. Total Integration Steer your boat, adjust your speed, set up route navigation, or anchor at your current location with full touchscreen control from HDS LIVE, HDS Carbon, and Elite Ti2 displays. Our Pro Team anglers asked us to build a trolling motor with full integration capability, including a foot pedal that could serve as an extension of the display’s user interface. Lowance listened – delivering an all-everything pedal with easily accessible Anchor and Heading Mode quick access keys, plus programmable shortcut keys that can be used for saving waypoints and controlling Power-Pole shallow water anchors. Interference Free Ghost’s brushless motor not only runs quieter than common brushed motors but emits zero electromagnetic interference, ensuring the clearest, interference-free sonar views on your fishfinder display. Configurable Foot-Pedal Configure the Ghost pedal to suit your preferences via programmable shortcut buttons and a Flip Switch that allows the trolling motor to be driven from either side of the pedal. The foot pedal features a battery-level indicator, Anchor and Heading mode quick access keys with LED lights, and an indicator beep to provide feedback when a mode is engaged. You can program the shortcut keys to quickly drop a waypoint or lower/raise your Power-Pole shallow-water anchor Easy to Stow & Go Ghost has a dual-action gas spring that makes stowing and deploying the motor easier and quieter. Plus, there is no longer a need to align the lower unit before stowing the motor as Ghost auto aligns itself when stowing to lay flat and secure on the mount. 360° Breakaway Mount The 360° breakaway mount is designed to absorb impact, allowing the shaft to deflect away from obstructions and then reposition itself after impact. An integrated stabilizer bar reduces bouncing when running in rough water. Flexible Installation The Ghost trolling motor is designed to work with either 24- or 36-Volt systems, making it compatible with any setup and easier to implement future upgrades to batteries and chargers. Features: Reliable Silent Operation Fastest Top-End Speed Total Integration with HDS LIVE, HDS Carbon, and Elite Ti² Fly-By-Wire Steering Plug-and-Play Lowrance sonar Configurable Foot-pedal Interference Free Flexible Installation 360° Breakaway Mount Easy to Stow and Go What's in the Box? HDI Nosecone Transducer for Ghost Trolling Motor  N2K-T-RD Network T-Connector

Ghost® Trolling Motor - 52" Quiet by Name. Powerful by Design. Fish longer, run faster and move in closer to the fish with the rugged, reliable and ultra-quiet Lowrance Ghost 52- and 60-inch Trolling Motors. These new sized freshwater trolling motors are designed for larger bass and walleye type boats with higher bows. Never spook another fish with the Ghost’s powerful brushless motor with the most thrust and longest run time of any trolling motor on the market. Ghost delivers 25-percent more power and 60-percent greater efficiency, allowing you to silently cover more water, easily anchor when and where you want – even in strong winds – and stay on the water longer without draining your battery. With integrated Lowrance sonar options, waypoint anchoring and a three-year warranty, Ghost trolling motors are the new standard for anglers looking to upgrade their trolling motor. Reliability We put our 60-plus years of innovation and marine electronics expertise to work in designing the Lowrance Ghost freshwater trolling motor. After years of researching when and why trolling motors fail, we went to work to exceed those standards, building Ghost in-house, from scratch. Four years and 10,000 testing hours later, we have delivered the quietest, most reliable, and most powerful trolling motor on the market. Silent Operation So silent, you’ll wonder if it’s running, Ghost allows you to move in closer than ever before with its ultra-quiet brushless motor. Fish will never hear you coming. Incredible Performance Zoom from spot to spot or zip across the cove with up to 25-percent more thrust than competing models. Ghost’s brushless motor also delivers 60-percent better run-time efficiency, so you can enjoy the best top-end speed and acceleration without sacrificing battery life. Stay out later and run it harder – you will fish longer with Ghost. Own Your Spot Ghost’s powerful and precise anchoring lets you anchor your boat on a waypoint, at your current location or anywhere on the map – regardless of wind conditions – so you can spend more time fishing and less time maintaining your position. With a simple press of your foot, you can lower or raise your Power-Pole® shallow-water anchor or anchor at your current location using the quick access keys built into the Ghost foot pedal. Total Integration Steer your boat, adjust your speed, set up route navigation or anchor at your current location with full touchscreen control from HDS LIVE, HDS Carbon and Elite Ti2 displays. Our Pro Team anglers asked us to build a trolling motor with full integration capability, including a foot pedal that could serve as an extension of the display’s user interface. We listened – delivering an all-everything pedal with easily accessible Anchor and Heading Mode quick access keys, plus programmable shortcut keys that can be used for saving waypoints and controlling Power-Pole shallow water anchors. Plug-and-play Lowrance Sonar Ghost is packaged with an HDI nosecone transducer, giving you the high-level performance of Lowrance CHIRP sonar and DownScan Imaging™ right out of the box. Anglers who want to step up to the extreme, high-resolution views beneath and to the sides of the boat can add an optional Active Imaging™ 3-in-1 nosecone with Lowrance CHIRP, SideScan and DownScan Imaging. Fly-By-Wire Steering Instant and smooth fly-by-wire steering control gives Ghost the feel of a traditional cable-steer motor, but without the physical cables that wear out over time. Configurable Foot-pedal Configure the Ghost pedal to suit your preferences via programmable shortcut buttons and a Flip Switch that allows the trolling motor to be driven from either side of the pedal. The foot pedal features a battery-level indicator, Anchor and Heading mode quick access keys with LED lights and an indicator beep to provide feedback when a mode is engaged. You can program the shortcut keys to quickly drop a waypoint or lower/raise your Power-Pole shallow-water anchor. Interference Free Ghost’s brushless motor not only runs quieter than common brushed motors, but emits zero electromagnetic interference, ensuring the clearest, interference-free sonar views on your fish finder display. Flexible Installation The Ghost trolling motor is designed to work with either 24- or 36-Volt systems, making it compatible with any set-up and easier to implement future upgrades to batteries and chargers. 360-Degree Breakaway Mount The 360-degree breakaway mount is designed to absorb impact, allowing the shaft to deflect away from obstructions and then reposition itself after impact. An integrated stabilizer bar reduces bouncing when running in rough water. TMR-1 Remote Set anchor and control the speed and direction of the Lowrance® Ghost trolling motor from anywhere on your boat with the lightweight and easy-to-use TMR remote control. Easy to Stow and Go Ghost has a dual-action gas spring that makes stowing and deploying the motor easier and quieter. Plus, there is no longer a need to align the lower unit before stowing the motor as Ghost auto aligns itself when stowing to lay flat and secure on the mount. Features: Perfect for bigger bass and walleye boats with higher bows Available with 52- and 60-inch shafts Reliable Silent operation with fastest top-end speed Fly-By-Wire Steering Plug-and-play Lowrance sonar Configurable foot-pedal Interference free Total integration with HDS® LIVE, HDS CARBON® and ELITE™ Ti2 Flexible installation 360° Breakaway Mount Easy to stow and go Trolling Motor Remote (TMR-1) optional for Ghost 52 What's in the Box? Trolling Motor Compass-1 (TMC-1) N2K-T-RD Network T-Connector Sonar Adapter CAble 9P Mini to 9P HDI Nosecone Transducer for Ghost Trolling Motor