|
Micro Inline Termination Resistor
The inline terminator is used where the NMEA 2000® network is terminated at a product, for example the top of the mast at a weather instrument or GPS antenna/receiver. The inline terminator plugs directly into the product with the other end connected to the network cable
Micro Termination resistors usually terminate the network by plugging into a tee. The inline terminator doesn't require a tee and easily fits within an instrument's mounting pipe where a tee wouldn't
Rugged, IP-68 rated connectors (submersible) for continued connection integrity in marine environment
|
20.16 |
|
|
Micro Termination Resistors
Termination Resistors are required on a NMEA 2000® network and are placed at each end of a network trunk cable. Like the double-ended cordsets, the termination resistors are waterproof and continue to function even while submerged in the bilge.
Screw terminal connector for positive connections
Termination resistors are used to terminate both ends of the trunk line
|
12.00 |
|
|
Micro Termination Resistors
Termination Resistors are required on a NMEA 2000® network and are placed at each end of a network trunk cable. Like the double-ended cordsets, the termination resistors are waterproof and continue to function even while submerged in the bilge.
Screw terminal connector for positive connections
Termination resistors are used to terminate both ends of the trunk line
|
12.00 |
|
|
J1939 Termination Resistor
J1939 Termination Resistor, Inline J1939.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
54.23 |
|
|
Termination Resistors are required on a NMEA 2000 network and are placed at each end of a network trunk cable. Like the double-ended cordsets, the termination resistors are waterproof and continue to function even while submerged in the bilge.
Diagnostic versions indicate correct polarity at a glance to ensure power connections have been made properly
Screw connector for positive connnection
Termination resistors are used to terminate both ends of the trunk line
|
12.10 |
|
|
Termination Resistors are required on a NMEA 2000 network and are placed at each end of a network trunk cable. Like the double-ended cordsets, the termination resistors are waterproof and continue to function even while submerged in the bilge.
Diagnostic versions indicate correct polarity at a glance to ensure power connections have been made properly
Screw connector for positive connnection
Termination resistors are used to terminate both ends of the trunk line
|
12.10 |
|
|
Termination Resistors are required on a NMEA 2000 network and are placed at each end of a network trunk cable. Like the double-ended cordsets, the termination resistors are waterproof and continue to function even while submerged in the bilge.
Diagnostic versions indicate correct polarity at a glance to ensure power connections have been made properly
Screw connector for positive connnection
Termination resistors are used to terminate both ends of the trunk line
|
27.17 |
|
|
Termination Resistors are required on a NMEA 2000 network and are placed at each end of a network trunk cable. Like the double-ended cordsets, the termination resistors are waterproof and continue to function even while submerged in the bilge.
Diagnostic versions indicate correct polarity at a glance to ensure power connections have been made properly
Screw connector for positive connnection
Termination resistors are used to terminate both ends of the trunk line
|
27.17 |
|
|
Bus Termination Resistor for OceanLink® & AcquaLink® Gauges
VDO Marine Bus Termination Resistor.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
32.72 |
|
|
NMEA 2000 Inline Terminator
For proper termination of a network in a single piece, space saving design. The inline terminator connects between a backbone cable and a drop cable, while still maintaining proper termination for the end of the network.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
15.91 |
|
|
NMEA 2000 Female Terminating Resistor - 120 OHM
Lenco's NMEA 2000 Female Terminating Resistor.
Features:
120 OHM
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
16.97 |
|
|
NMEA 2000 Male Terminating Resistor - 120 OHM
Lenco's NMEA 2000 Male Terminating Resistor.
Features:
120 OHM
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
16.97 |
|
|
CAN Terminating Resistor V2
The VETUS CAN Terminating Resistor V2 provides durable marine-grade construction and design, for use in terminating one end of your CAN Bus Network.
|
45.31 |
|
|
NMEA 2000 Inline Terminator - Female
Features:
Color - White
Connector - Inline NMEA 2000
Connection - 1 Female
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
32.72 |
|
|
Network Bus Extender
Part #: NBE100-01
Maretron's NBE100 (Network Bus Extender) allows you to extend the maximum node count, network trunk length and cumulative drop length of any NMEA 2000 network. The NBE100 solves bus errors and other electrical issues caused by exceeding any of these limitations and makes design of large networks easier. NMEA 2000 networks have a maximum of 50 nodes allowed on a single network, a maximum network trunk length of 200m and a maximum cumulative drop length of 78m. If you have a network that exceeds any of these specifications, you can simply disconnect the network trunk in the middle and connect the ends to the NBE100, along with additional termination resistors. This will split the network into two electrical segments, each of which can have up to 50 nodes, for a total of 100 nodes on the logical network. The NBE100 will transparently route NMEA 2000 messages between the two network segments, making them work as a single logical NMEA 2000 network. Advanced priority-based message routing ensures that higher-priority messages are always prioritized over lower-priority messages, enabling predictable and reliable network operation.
Features:
Segments a single large NMEA 2000 network into two smaller electrical segments
Allows you to exceed the 50 node limitation on a NMEA 2000 network
Allows you to exceed the 200m trunk length limitation on a NMEA 2000 network
Allows you to exceed the 78m cumulative drop length limitation on a NMEA 2000 network
Allows all NMEA 2000 devices to operate as if they were still on a single NMEA 2000 network
Priority-based message routing ensures higher-priority messages get through the bus extender first
Optically isolates network segments, increasing signal integrity and network reliability
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
324.48 |
|