|
Myers Pumps 05014A124 Ring Pipe Rubber
Myers 05014A124, Pipe Ring, Rubber, for 1-1/4" Pipe, for use with Model HC-33, HC-50, HC-75, HC-100, Series HC
|
16.65 |
|
|
Myers Pumps MS33PV1 Sump Pump 1/3Hp 115V 8'Cd
Myers MS33PV10, MS Series, Sump Pump with Vertical Float Switch, 1/3 HP, 115 Volts, 1 Phase, 1-1/2 NPT Discharge, 52 GPM Max, 24 ft Max Head, Automatic, 10 ft Cord
Features
3/16" solid handling
Maintenance-free operation
Vertical float switch for sump pits with 10" diameter or larger
Dual ball-bearing motor and additional lip seal for durability and longer pump life
Durable PSC motor for years of service
Oil-filled motor for maximum heat dissipation and continuous bearing lubrication
Thermal overload protection with automatic reset
Zinc motor housing
Thermoplastic volute case
CSA listed
Lead Time: Average 7-10 Days, Factory Back Order.
|
293.22 |
|
|
Myers Pumps MDC33V20 Sump Pump 0.33HP 115V 20' Cord Automatic
Myers MDC Series Sump Pump Typical Applications
Basement Sumps
Dewatering
Water Transfer
Light Septic Tank Effluent
|
420.81 |
|
|
Myers Pumps CT25FAB Centrifugal Pump Field Assy Kit
Myers Centrifugal Pump End Only is Cast Iron, Field Assembly Kit, for 2-1/2HP Motor, 2" Suction x 1-1/2" Discharge Ports, 96GPM at 20' Head, 140' Head Max, Brass Impeller 6-1/16" Diameter
|
918.96 |
|
|
Myers Pumps QP7KIT Pump End Assembly
20590D106 KIT PUMP END FOR QP7 PUMP
|
1086.96 |
|
|
Myers Pumps 05876A127 O'Ring
Myers 05876A127 O'Ring 7 1/2" OD X 7 1/4" ID X 1"
|
18.90 |
|
|
Myers Pumps 05876A087 O'Ring
Myers 05876A087 O-Ring
For use with Models: HJ75S, HJ100S, HJ75D, HJ100D, Series HJ
|
17.31 |
|
|
Myers Pumps 25208A001 Parts Kit
Myers 25208A001 PK50 Parts Kit for 1/2 HP. For Models: HT, HR, HJ and QD Jet Pumps.
Parts kit contains: Shaft seal, impeller, diffuser, gasket, O-ring, venturi and nozzle necessary to overhaul either shallow or deep well jet pumps.
|
242.97 |
|
|
Myers Pumps 25208A002 Parts Kit
Myers 25208A002 PK75 Parts Kit for 3/4 HP. Models HT and HJ Jet Pumps.
Parts kit contains: Shaft seal, impeller, diffuser, gasket, O-ring, venturi and nozzle necessary to overhaul either shallow or deep well jet pumps.
|
291.20 |
|
|
Myers Pumps 25208A015 Parts Kit for Model QD Pumps
Myers 25208A015 Parts Kit for 3/4HP & 1HP QD Pumps.
Contains Shaft Seal, Impeller, Diffuser, Gasket, O-Ring, Venturi and Nozzle for Shallow or Deep Well Pumps.
|
291.20 |
|
|
Myers Pumps ME50S-11 Effluent Pump 1/2Hp 115V
Myers ME50S-11, Effluent Pump, 1/2 HP, 115 Volts, Manual, 1 Phase, 20 ft Cord, Cast Iron, 2 Inch Discharge
Features
Two-vane cast iron impeller design provides maximum dosing efficiency
Enclosed design for high-efficiency pumping
Eliminates possibility of jamming between impeller and volute
Passes full 3/4" solids
Durable motor will deliver many years of reliable service
Oil-filled motor for maximum heat dissipation and continuous bearing lubrication
Optional seal leak probe warns of seal leak condition (dual seal motors only); helps prevent costly motor damage
Motors have a winding current and temperature-sensitive overload (single phase only)
Volute seal ring is replaceable; restores pump to original performance if wear should occur
Motor is held in place by 4 screws; easily removed if service if ever needed
|
1771.38 |
|
|
Myers Pumps 5014A166 Gasket
For Myers Pump Models:
QP10
QP10-3
QP15
QP15-3
QP20
QP20-3
QP30
QP30-3
|
11.34 |
|
|
Myers Pumps 05014A193 Rubber Gasket
Myers 05014A193 is a Gasket Rubber .797 X 1/4
|
12.29 |
|
|
Myers Pumps 05059A354 Gasket
Myers 05059A354 Paper Gasket is 7 3/4" x 7-1/32" x 1/64"
For use with Models: HC-75, HC-100, Series HC
|
13.23 |
|
|
Myers Pumps 05059A318 Deflector Rubber
Myers 05059A318 Slinger, for Units with Separate Slinger.
For use with Models: HJ50S, HJ75S, HJ100S, HJ50D, HJ75D, HJ100D, HC-33, HC-50, HC-75, HC-100, Series HJ, HC & QP
|
16.07 |
|