March 0125-0028-0100 Pump Housing  

March 0151-0028-0100 Impeller Hsg  

March 0125-0028-0200 Pump Hsg & Shaft Assy

March 0125-0057-0100 Rear Housing Rear Housing & Plug Assembly LC for LC-2CP-MD made of Polypro/Glass

March 0125-0083-0100 Drive Magnet .250" Bore Fits March Pumps: 809, 815, AC-2CP-MD, BC-2CP-MD, LC-2CP-MD Cruisair PML250, PML250C   Note: This will not fit 809 BR 24vdc With Non-replaceable brushes  

March 0125-0142-0100 Marine Pump LC-2M-MD March Pump’s industrial LC-2M-MD is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 5 gallons per minute at 1 foot, and its maximum head is 13 Feet (5.5PSI). The LC-2M-MD pump may be used submerged or not submerged. The pump is Ignition Protected per SAE J1171 and ISO 8846.  It is capable of 12,000 BTU a hour. Max Flow: 18.5 LPM Max Head: 2.7 M Power: 0.014 KW   Electrical/Air: 230V 50/60Hz   230V Motor 6 Foot Cord, Submersible 60Hz: 1Ph 0.025HP/0.019kW, 0.53 AMPS, 3450RPM 50Hz: 1Ph 0.18HP/0.014kW, 0.72 AMPS, 2850RPM   Inlet: 3/8"FPT & 3/4"MPT Outlet: 1/4"MPT   Submersible: Yes   Wet End: Polypropylene (Front Housing, Impeller), Nylon (Rear Housing) Viton (O-Ring), Buna N (O-Ring, Cooling Tube Seal), 316 Stainless Steel (Shaft, Cooling Tube), Ceramic (Thrust Washer), Ceramic Magnet Uses: Submersible or Open Air When submerged, the following is also in contact with the solution: Epoxy, Buna N, Cord Max Internal Pressure: 25 PSI / 1.7 bar Max Internal Temperature: 130 °F / 54 °C Ignition Protected per SAE J1171 and ISO 8846: Rated IP67

March 0125-0029-0100 Impeller Mag Assembly  

March 0125-0055-0100 Impeller Mag Assembly Impeller (Molded) 1.812 Dia for 2C-MD, AC-2CP-MD, LC-2CP-MD made of Polypro/Teflon/Glass

March 0125-0113-0100 Large Base Fits LC-2CP-MD, LC-3CP-MD March Pump models Kit includes base plate and four Rubber isolation grommets made from Polypro/Glass (Black) Does not include mounting screws Use existing base screws to attach to the pump

March 0125-0141-0100 Marine Pump LC-2M-MD March Pump’s industrial LC-2M-MD is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 5 gallons per minute at 1 foot, and its maximum head is 13 Feet (5.5PSI). The LC-2M-MD pump may be used submerged or not submerged. The pump is Ignition Protected per SAE J1171 and ISO 8846.  It is capable of 12,000 BTU a hour. Max Flow: 5 GPM Max Head: 13 FT Power: 0.02 HP   Electrical/Air: 115V 50/60Hz   115V Motor 6 Foot Cord, Submersible 60Hz: 1Ph 0.2HP/0.015kW, 0.92 AMPS, 3450RPM 50Hz: 1Ph 0.18HP/0.014kW, 1.1 AMPS, 2850RPM   Inlet: 3/8"FPT & 3/4"MPT Outlet: 1/4"MPT   Submersible: Yes   Wet End: Polypropylene (Front Housing, Impeller), Nylon (Rear Housing) Viton (O-Ring), Buna N (O-Ring, Cooling Tube Seal), 316 Stainless Steel (Shaft, Cooling Tube), Ceramic (Thrust Washer), Ceramic Magnet Uses: Submersible or Open Air When submerged, the following is also in contact with the solution: Epoxy, Buna N, Cord Max Internal Pressure: 25 PSI / 1.7 bar Max Internal Temperature: 130 °F / 54 °C Ignition Protected per SAE J1171 and ISO 8846: Rated IP67

March Wet End Part# 0145-0045-0100  March Pump Wet End Assembly Includes All Parts except Motor, Bracket and Drive Magnet   0145-0045-0100 WET END KIT 6PK AC-4C-MD

March Wet End Part# 0130-0114-0100  March Pump- Wet End Assembly Includes All Parts except Motor, Bracket and Drive Magnet   0130-0114-0100 WET END KIT 6PK BC-3CP-MD

March Wet End Part# 0145-0046-0100  March Pump- Wet End Assembly Includes All Parts except Motor, Bracket and Drive Magnet   0145-0046-0100 WET END KIT 6PK BC-4C-MD

March Wet End Part# 0161-0035-0100  March Pump Wet End Assembly Includes All Parts except Motor, Bracket and Drive Magnet   0161-0035-0100 WET END KIT 1PK TE-10K-MD

March Wet End Part# 0150-0148-0100  March Pump Wet End Assembly Includes All Parts except Motor, Bracket and Drive Magnet   0150-0148-0100 WET END KIT 6PK TE-5C-MD