|
Water tank sizes ensures you the right fit for your boat. The resin used in Moeller each water tank meets FDA specs for polymers used in contact with food, which ensures safe, odor-free water. A multitude of water/waste tank sizes ensures you the right fit for your vessel needs. Feature nominal wall thickness of 0.300. Resin meets FDA spec CTF177 1520 requirements. Satisfies all U.S. Coast Guard standards. Provides standard NPT openings for vent, fill & drain. Polyethylene tanks will not filter taste into water or emit waste odors. DROP SHIPPED DIRECT FROM FACTORY, FREIGHT NOT ALLOWED. EXTENDED LEAD TIME MAY APPLY.
|
279.99 |
|
|
Water tank sizes ensures you the right fit for your boat. The resin used in Moeller each water tank meets FDA specs for polymers used in contact with food, which ensures safe, odor-free water. A multitude of water/waste tank sizes ensures you the right fit for your vessel needs. Feature nominal wall thickness of 0.300. Resin meets FDA spec CTF177 1520 requirements. Satisfies all U.S. Coast Guard standards. Provides standard NPT openings for vent, fill & drain. Polyethylene tanks will not filter taste into water or emit waste odors. DROP SHIPPED DIRECT FROM FACTORY, FREIGHT NOT ALLOWED. EXTENDED LEAD TIME MAY APPLY.
|
221.99 |
|
|
Moeller waste tanks meet the material and pressure specifications for sanitation tanks as called out in federal regulations. Each tank features a nominal wall thickness of 0.30 in. (7.6 mm) to control odor which would otherwise permeate through the walls. Resin meets FDA spec CTF177 1520 requirements. Satisfies all U.S. Coast Guard standards. Provides standard NPT openings for vent, fill & drain. DROP SHIPPED DIRECT FROM FACTORY, FREIGHT NOT ALLOWED.
|
344.99 |
|
|
Moeller waste tanks meet the material and pressure specifications for sanitation tanks as called out in federal regulations. Each tank features a nominal wall thickness of 0.30 in. (7.6 mm) to control odor which would otherwise permeate through the walls. Resin meets FDA spec CTF177 1520 requirements. Satisfies all U.S. Coast Guard standards. Provides standard NPT openings for vent, fill & drain. DROP SHIPPED DIRECT FROM FACTORY, FREIGHT NOT ALLOWED.
|
214.99 |
|
|
Water tank sizes ensures you the right fit for your boat. The resin used in Moeller each water tank meets FDA specs for polymers used in contact with food, which ensures safe, odor-free water. A multitude of water/waste tank sizes ensures you the right fit for your vessel needs. Feature nominal wall thickness of 0.300. Resin meets FDA spec CTF177 1520 requirements. Satisfies all U.S. Coast Guard standards. Provides standard NPT openings for vent, fill & drain. Polyethylene tanks will not filter taste into water or emit waste odors. DROP SHIPPED DIRECT FROM FACTORY, FREIGHT NOT ALLOWED. EXTENDED LEAD TIME MAY APPLY.
|
156.99 |
|
|
Water tank sizes ensures you the right fit for your boat. The resin used in Moeller each water tank meets FDA specs for polymers used in contact with food, which ensures safe, odor-free water. A multitude of water/waste tank sizes ensures you the right fit for your vessel needs. Feature nominal wall thickness of 0.300. Resin meets FDA spec CTF177 1520 requirements. Satisfies all U.S. Coast Guard standards. Provides standard NPT openings for vent, fill & drain. Polyethylene tanks will not filter taste into water or emit waste odors. DROP SHIPPED DIRECT FROM FACTORY, FREIGHT NOT ALLOWED. EXTENDED LEAD TIME MAY APPLY.
|
164.99 |
|
|
Rugged cross-linked polyethylene tanks are corrosion and pit resistant, with Hose Tite™ machined aluminum fill spout, withdrawal and vent fittings molded directly into the shell. Machined aluminum 3/8" withdraw fitting has 360° rotational capability for hookup convenience. Molded-in hold down grooves help secure tank.
|
446.99 |
|
|
CM90 Circulation Pump - 23.7GPM - 12V - 1-½" Outlet
A line of compact magnetic driven centrifugal pumps which combine high flow
rates with very low electric current consumption. Suitable for fresh water,
ethylene glycol and salt water circulation.
System Pressure: -0.3 to +3.0 bar; stationary max. 4.0 bar
Liquid: water/glycol mixture; max. 60% glycol, fresh and salt water
Motor Service Life: More than 5,000 hours at nominal voltage 10,000
start/stops. Interchangeable motor.
Motor, Voltage: Nominal 13.6V DC for use between 10-16V Nominal 27.2V
DC for use between 20-32V
Input Power: Max. 125W
Dry Running: 30 minutes
Dimensions: 244mm (L) x 120mm (W) x 150mm (H)
Ports:Ø 20mm (3/4") & Ø 38mm (1-1/2")
Weight: 3.0kg (6.6lbs)
Body: PPA, glass-fiber reinforced
Mounting: Separate universal bracket for flat surfaces
|
287.41 |
|
|
CM90 Circulation Pump - 17.2GPM - 12V - 3/4" Outlet
CM90 circulation pumps are a line of compact magnetic driven centrifugal pumps which combine high flow rates with very low electric current consumption. Suitable for fresh water, ethylene glycol and salt water circulation. Glass-fiber reinforced PPA body.
Specifications:
System Pressure:-0.3 to 3.0 bar; stationary max. 4.0 bar
Liquid: Water/glycol mixture; max. 60% glycol, fresh and salt water
Motor service life: More than 5,000 hours at nominal voltage, 10,000 start/stops. Interchangeable motor
Dry running: 30 minutes
Dimensions: 244mm L x 120mm W x 150mm H
Weight: 6.6lbs
Capacity: 17.2 GPM
Ports: 3/4"
|
287.41 |
|
|
Rugged cross-linked polyethylene tanks are corrosion and pit resistant, with Hose Tite™ machined aluminum fill spout, withdrawal and vent fittings molded directly into the shell. Machined aluminum 3/8" withdraw fitting has 360° rotational capability for hookup convenience. Molded-in hold down grooves help secure tank.
|
465.99 |
|
|
Rugged cross-linked polyethylene tanks are corrosion and pit resistant, with Hose Tite™ machined aluminum fill spout, withdrawal and vent fittings molded directly into the shell. Machined aluminum 3/8" withdraw fitting has 360° rotational capability for hookup convenience. Molded-in hold down grooves help secure tank.
|
495.99 |
|
|
Stow 'n Go Dock Box - Deep Small - 46"L x 26"W x 27"H
With a UV gelcoat finish and the stainless steel lockable latch and hardware these are built tough. Our dock boxes incorporate gas shock lifts, which come standard on all models. These shocks help to keep your lid open on rocking docks and in higher wind areas and allows for a slower, more controlled closing. These fiberglass molded dock boxes are also constructed with a smooth interior finish which helps prevent splinters in your hands when storing or retrieving your boating accessories.
Features:
46"L x 26"W x 27"H
Heavy duty stainless steel lockable latch and hinges
Gas shocks come standard on all models
|
829.85 |
|
|
Stow 'n Go Low-Profile Dock Box - 40"L x 19"W x 20"H
With a UV gelcoat finish and the stainless steel lockable latch and hardware these are built tough. Our dock boxes incorporate gas shock lifts, which come standard on all models. These shocks help to keep your lid open on rocking docks and in higher wind areas and allows for a slower, more controlled closing. These fiberglass molded dock boxes are also constructed with a smooth interior finish which helps prevent splinters in your hands when storing or retrieving your boating accessories.
Features:
40"L x 19"W x 20"H
Heavy duty stainless steel lockable latch and hinges
Gas shocks come standard on all models
|
691.46 |
|
|
Proline Bilge Pump
1000 GPH w/DuraPorts
Capacity 3' (0.9M) head (13.6V):60 L/M - 952 GPH
Capacity Straight (13.6V): 73 L/M - 1150 GPH
Amperage:3A
Fuze Size:5A
Connection:3/4"
Dimensions: 5"L x 3"W x 4"H
|
42.37 |
|
|
10' x 10' Inflatable Dock
The 10' x 10' dock is constructed to comfortably fit up to 10 people, making it the perfect size to party, play, relax, or unwind on the water. Throw on your chairs and cooler, and you have yourself your own private island.
The inflatable dock was invented with one goal in mind: to create a floating “home base” on the water. Throw on some lounge chairs and a cooler, and you’ve created your own floating island to kick back with friends and family. Designed with premium-grade PVC & our state-of-the-art drop stitch technology, our inflatable docks feel rigid when inflated, and are incredibly light & compact when folded up.
The concept is quite simple – they’re really just floating rectangles. But when you take a closer look, they become so much more – hang out on it, work off it, launch off it. The possibilities truly are limitless.
Drop-stitch core - Drop-Stitch is constructed of thousands of polyester threads that connect the top and bottom pieces of PVC together. This technology allows for high-pressure inflation, creating a flat & rigid surface, with a solid feel.
PVC Exterior Layer - The top layer of the inflatable dock is constructed with 1000 Denier, 3 Ply, PVC material. This premium-grade material is extremely durable, UV & Puncture Resistant, and tough enough to withstand harsh marine environments.
Fabric-reinforced PVC rail - The inflatable dock’s exterior rails are double-reinforced to ensure seam durability and toughness. Its extra-reinforced exterior layer is designed to absorb impact from hard objects, so you can confidently tie up against other boats and docks.
Features:
Ties up to anything, anywhere
Accommodates chairs, coolers, and more
Doubles as a portable water sports launch pad
Modular design for easy connection
Equipped with high-pressure Halkey Roberts (HR) valve
Additional 100 square feet of floating real estate
Pet-friendly PVC material
Equipped with (6) D-Rings to attach necessary tools
Double-layered PVC rail eliminates the risk of hull damage when tying to your boat or dock
Allows access to hard-to-reach spots you couldn't before
Technical Specifications:
Folded size - 29" x 18" x 11"
Inflated size - 10' (L) x 10' (W) x 6" (H)
Recommended pressure - 10 PSI
Weight - 54 lbs
In the Box:
Floating dock
Pump
Carry bag
Repair kit
|
623.99 |
|