|
MKA-58 Boat Deck Reinforcement Kit
Provides additional strength, stability, and versatility for mounting Minn Kota Quest series RT Instinct, Ulterra, Terrova, and RT Terrova trolling motors.
Features:
Provides additional strength and stability for mounting Minn Kota Quest series trolling motors
Helps to distribute torque loads associated with higher thrust motors
Can be installed directly to the boat deck or in combination with MKA-56 / RTA-55 quick-release bracket
Multiple mounting hole patterns allow for flexible installation
Includes stainless steel hardware
Designed for use in saltwater
Compatible with Ulterra, Terrova, Riptide Terrova, and Riptide Instinct QUEST series trolling motors
|
234.70 |
|
|
MKA-50 Bow-Mount Stabilizer Kit for Fortrex
Features:
Reduces motor bouncing when in stowed position
Attaches to the left or right side of bowguard
Pivots into vertical position and rests on the boat deck when motor is stowed
Rotates in the horizontal position with bowguard when the motor is deployed
Includes rubber bumper to protect deck finish
Stainless steel hardware tested for saltwater use
Fits any Fortrex or Riptide SF bow-mount trolling motor
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
47.93 |
|
|
MKA-21 Composite Quick Release Bracket
Easily remove your electric-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).NOTE: Not for use with 72" shaft length motors.
Features
Allows trolling motor to be quickly removed from and reattached to boat deck
Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck
Composite construction resistant to rust, corrosion, and discoloration
Includes stainless steel mounting hardware and locking pin
Locking handle can be secured with padlock (not included) for additional security
Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40
NOTE: Not for use with any 112 lbs. thrust motors or any motor with a shaft length of 72” or longer. Instead use the MKA-53 model.
Designed for use in freshwater
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
78.46 |
|
|
MKA-56 Quick Release Bracket
Easily remove your electric steer, bow-mount trolling motor featuring QUEST technology. High-yield composite construction is super strong and impervious to corrosion and is specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. The locking handle with stainless steel pins can be secured with a padlock (padlock not included, sold separately).
Features:
Designed specifically for motors featuring QUEST technology to meet the increased stress created by high-thrust motors and long shaft lengths
Allows bow-mount trolling motors to be quickly mounted and/or removed from boat deck
Low-profile design attaches trolling motor to top bracket and drop in over deck-mounted puck
Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration
Locking handle can be secured with padlock (not included) for additional security
Compatible with electric steer motors featuring QUEST technology
Designed for use in freshwater or saltwater
|
348.70 |
|
|
MKA-64 Quick Release Bracket
Easily remove your electric steer and bow-mount trolling motor. High-yield composite construction is super strong, impervious to corrosion, and specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. A locking handle with stainless steel pins can be secured with a padlock (padlock not included; sold separately). NOTE: Recommended for 112 lb. thrust and 72" shaft trolling motors.
Features:
Designed to meet the increased stress created by high-thrust motors and long shaft lengths
Allows bow-mount trolling motors to be quickly mounted and/or removed from the boat deck
The low-profile design attaches the trolling motor to the top bracket and drops in over the deck-mounted puck
Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration
The locking handle can be secured with a padlock (not included) for additional security
Designed for use in freshwater
|
200.50 |
|
|
MKA-16-03 Quick Release Bracket
For quick, easy removal of your electric-steer, bow-mount trolling motor. Extruded aluminum design with side screw provides quiet and secure locking system.
Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40.
- Allows trolling motor to be quickly removed from and reattached to boat deck
- Sidescrew design attaches trolling motor to top bracket and slides into - deck-mounted bottom bracket, secured with tightening screw
- Solid, anodized aluminum construction
- Includes stainless steel mounting hardware
- Brackets can be secured with padlock (not included) for additional security
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
64.03 |
|
|
MKA-49 Cable & Handle
For Minn Kota cable steer bow-mount motors, this replacement handle features an ergonomic soft-grip design with an ultra-strong, abrasion-resistant, coated stainless steel braided cable.
Features:
Compatible with cable steer bow-mount motors: Fortrex, Maxxum, Edge, Riptide SF, Riptide SM and Riptide SE
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
52.30 |
|
|
MKA-51 Quick Release Bracket
The bracket and top plate allows you to easily slide the motor inboard (up to 6"), or easily remove it for storage and security. Features corrosion-resistant anodized aluminum construction with stainless steel hardware.
Compatible with Ulterra™, Terrova®, PowerDrive™, PowerDrive V2 and DeckHand 40.
Features:
Slide motor inboard 6” for a better boat cover fit and more clearance when launching boat
Allows trolling motor to be quickly removed from and reattached to boat deck
Cam-lock design reduces bracket movement and noise
Includes stainless steel mounting hardware, lanyard, and locking pin
Upper and lower plates include slot for securing with padlock (not included) for added security
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
229.96 |
|
|
MKA-57 Quick Release Bracket
The bracket and top plate allow you to easily slide the motor inboard (10") or easily remove it for storage and security. Features anodized aluminum construction with stainless steel components and hardware for optimal corrosion protection in all saltwater or freshwater environments.
Features:
Slide motor inboard 10" for a better boat cover fit and more clearance when launching the boat
Designed specifically for motors featuring QUEST technology to meet the increased stress created by high-thrust motors and long shaft lengths
Allows trolling motors to be quickly removed from and reattached to the boat deck
The dual Cam-lock design reduces bracket movement and noise
Includes stainless steel mounting hardware, a lanyard, and a locking pin
Upper and lower plates include slots for securing with a padlock (not included) for added security
Compatible with electric steer motors featuring QUEST technology
Designed for use in freshwater or saltwater
|
435.86 |
|
|
A durably constructed Minn Kota Drift Sock slows down your drift to enable proper bait presentation over holding fish.
34" deep x 22" diameter
Features 210 denier ripstop nylon with 4 heavy-duty 1" nylon straps
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
43.58 |
|
|
A durably constructed Minn Kota Drift Sock slows down your drift to enable proper bait presentation over holding fish.
34" deep x 22" diameter
Features 420 denier ripstop nylon with 4 heavy-duty 1" nylon straps
Weights at the bottom and floats at the top are sewn into the edge of the opening to allow the sock to open instantly when thrown into the water
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
52.30 |
|
|
Rope & Handle
For Minn Kota cable steer bow-mount motors, this replacement handle features an ergonomic soft-grip design and durable, abrasion-resistant 48" nylon rope.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
10.45 |
|
|
MKA-62 Cable-Steer Quick Release Bracket
For quick, easy removal of your cable-steer, bow-mount trolling motor. The extruded aluminum design with side screws provides a quiet, secure locking system. Fits 52" to 72" shaft foot-control motors and 62" shaft hand-control motors. They are designed to handle the increased torque of QUEST series motors.
Features:
Recommended for the higher thrust associated with Ultrex™ QUEST™ series motors
Allows trolling motors to be quickly removed from and reattached to the boat deck
Top and bottom plates slide together and are tightened/secured to one another using dual-locking hardware
Solid, anodized aluminum construction
Includes both 5/16" and 1/4" stainless steel mounting hardware
Brackets can be secured with a padlock (not included) for additional security
Fits 52" to 72" shaft, foot-control motors, and 62" shaft hand-control motors
|
187.75 |
|
|
Double Down! 2019 Minn Kota Talon Promotion
To receive your rebate, purchase (2) two qualifying Minn Kota Talon 12' or 15' models now until June 30th, 2019. Receive up to $500 by submitting online only. Don't miss out on this fantastic offer!
Offer valid now until June 30th, 2019.
Save $500 on Two Minn Kota Talon
It's the only shallow water anchor that goes down to 15' deep. The only one you can control from anywhere on the boat. And the only one with User-Selectable Anchoring Modes that let you anchor in anything. When it comes to dominating shallow water, Talon is the only name you need to know.
Offer valid now until June 30th, 2019.
Specials Closeouts Remanufactured Rebates
|
|
|
RAPTOR IS RELENTLESS
Raptor keeps working to hold you more reliably than any other anchor, especially in rough conditions. It knows where you're anchoring, what's happening to your boat, and what to do next. It reads the bottom, senses the anchoring force and reacts automatically to keep you locked down until the moment you're ready to change spots. Legendary Minn Kota durability and innovative anchoring technology make Raptor the only hydraulic anchor that can call itself relentless.
FIND THE RAPTOR FOR YOUR RIG
Raptor shallow water anchors install hydraulically and can anchor down to 8' or 10'. Match your boat with black, red, silver, and white models.
JUST THE RIGHT AMOUNT OF HOLD
Select Raptor models features Active Anchoring, This revolutionary anchoring technology continuously monitors anchoring force and adjusts to keep you pinned to the bottom.
Specials Closeouts Remanufactured Rebates
|
|