Hinge Plate Only for 24" Tab Bennett trim tab hinge plates are made of high-quality 304 stainless steel and remain strong and rigid, even in the most demanding environments. Hinge plates can be purchased individually, but they typically make up a trim plane assembly. Features: This hinge plate is only for a 24" tab This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

ATP Bridge Display Bennett Marine continues to lead the way as the largest manufacturer of durable hydraulic and electric trim tab systems for a variety of boat styles and sizes. More than 50 years in business, millions of trim tabs sold, and unmatched customer loyalty and satisfaction, we can proudly say that we’ve learned how to make extremely reliable products that outperform the competition. That’s why most of the best boat builders in the world use Bennett systems as standard equipment. Features: AutoTrim Pro Helm Display Style: Bridge Can only be used with hydraulic systems WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Garmin Mounting Plate for 18" & 24" HD, xHD, HD+ 4kW Radar domes With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68520 Vision Series Mounting Plate is designed for Garmin 18 and 24 Radar Domes (GMR Fantom 18, GMR Fantom 24, GMR 18 HD+, GMR 18 xHD, & GRM 24 xHD).  Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately

Axle Tie Plate Kit f/1-3/4" Round Axle This kit has everything you need to mount fresh springs to a fresh axle. Includes: 2 galvanized tie plates 4 yellow zinc plated U-bolts 8 zinc plates nuts and lock washers

Axle Tie Plate Kit f/1-1/2" Square Axle This kit has everything you need to mount fresh springs to a fresh springs to a fresh axle. Includes: 2 galvanized tie plates 4 yellow zinc plated U-bolts 8 zinc plated nuts and lock washers

Axle Tie Plate Kit f/2" Square Axle This kit has everything you need to mount fresh springs to a fresh axle. Includes: 2 galvanized tie plates 4 yellow zinc plated U-bolts 8 zinc plated nuts and lock washers

Jack Plate Mount for RV-100 RealVision 3D Transducer The Raymarine RV-100 Jack Plate Mounting Kit is the perfect accessory for mounting the RealVision 3D RV-100 transducer onto bass boats, flats boats and other shallow-draft, high-speed, outboard motor-powered boats. The bracket is made from marine grade stainless-steel and is pre-drilled to ensure a suitable fit on a wide variety of jack plate models. Bolts, washers, Nylock nuts and detailed instructions are included to complete the installation.

Threaded King Pin Base Plate - Base Plate Only This 7" x 7" threaded base plate works with standard pin King Pin post applications. Specifications: Size (inch): 7" x 7"

Mounting Plate for 1026 Swivel Mount Dimensions: 5 1/2" x 5 1/2" Bolting Dimensions: 4 1/2" x 3 1/2"

Two Socket Mounting Plate Only - 10 Pack This dual power socket/meter panel accommodates USB and standard power sockets and meters that are 1-1/8 inches in diameter. Constructed of injection-molded nylon.  Specifications: Distance Between Holes (Length): 3-1/2 in. Distance Between Holes (Width): 1 in. Diameter: 1-1/8 in. Weight: 0.05 lb. Package Size: Includes 10 dual power socket/meter panels

King Pin 7" x 7" Base Plate Only This 7" x 7" base plate works with standard pin King Pin post applications. Specifications: Size (inch): 7" x 7"

GP1213 SailPod Pre-Cut f/Raymarine gS125 Glass Bridge f/9.5" Wide Guard SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. SailPods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. Features: NavPod GP1213 SailPod Pre-Cut for Raymarine gS125 Glass Bridge 9.5" wide guard SailPods are for mounting a single Radar or Chartplotter at the helm Navigation at your finger tips NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions 10 year warranty on all Gen3 NavPods

GP2050-95 SailPod Pre-Cut f/Raymarine GS95 Glass Bridge f/12" Wide Guard GP2050 Series for 12" Guard, SailPods are for mounting a single radar or chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. A single SailPod is best mounted on a Single Bend AngleGuards or use a Double Bend AngleGuards to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. SailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

RAM Track Ball™ Mount with Marine Electronic Plate for the Eagle Cuda, FishEasy, Humminbird Piranha & Lowrance X-4 The RAP-B-107-1B-354-TRA1U consists of a Track Ball™ base, composite double socket arm and connecting Humminbird/Eagle/Lowrance marine base. The mount is designed with a RAM 1" diameter rubber ball and socket system that has adjustment points at both ends of the double socket arm - allowing for high adjustability to achieve perfect viewing angles. This kit is compatible with virtually any track system including the RAM Tough-Track™.  Ball Size: 1" Rubber "B" Ball Size Material: High Strength Composite Note: Part number reflects product packaged in a poly bag.

XLT 7.0 Powered Marine Winch w/Remote f/Boats up to 20' Features: For boats up to 20' MAX. boat weight 7,000lbs Convenient wireless remote included Rugged strap includes swiveling hook to prevent strap twisting Power in / Power out and free spool Manual override using standard tools in case of power loss 3-position guide so strap comes out stright Corrosion resistant Easy to access light and winch control switches WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.