|
5" Dome Light with Switch & 3 Stage Dimming - 10-30V - IP67
The LED technology used in this light provides a uniform output and eliminates hot spots common among LEDs. A touch-sensitive switch provides three-stage dimming. The brightest, mid-level, and low settings easily adjust with a touch of the on/off button. The on/off button illuminates blue to help locate it in the dark.
Features:
12/24V
51 x 0.5-watt LEDs
Natural White (4250K)
720 effective lumens
Plastic housing with a high-impact plastic lens
Surface mount, 3 stainless steel screws Included
IP67
*The "P" within the part number indicates retail packaging
|
71.69 |
|
|
7" Oval Dome Light with Switch & Dimming - 12/24V
The LED technology used in this light provides a uniform output and eliminates hot spots common among LEDs. A touch-sensitive switch provides three-stage dimming. The brightest, mid-level, and low settings easily adjust with a touch of the on/off button. The on/off button illuminates blue to help locate it in the dark.
Features:
12/24V
42 x 0.5-watt 2835 LEDs
Natural White (4250K)
680 Effective Lumens
Plastic housing with a high-impact plastic lens
Surface mount, 3 stainless steel screws Included
IP67
*The "P" within the part number indicates retail packaging
|
60.46 |
|
|
Aurora LED Dome Light - White Finish - White/Blue Dimming
Customers told us they wanted a high quality LED replacement for the ubiquitous dome light. It had to be bright, with wide even light. They wanted a clean look, an intuitive and reliable switch, and a notable level of quality. We delivered, and then added IP67 immersion protection. We then raised the bar with multiple color output options and dimming. Lumitec's Aurora Dome Light stands apart.
Specifications:
Voltage: 10 - 30V DC
12V DC Amps: 290mA
24V DC Amps: 160mA
Correlated Color Temperature: 5000
Color Rendering Index: 70+
Rated Watts: 4
Lumens (White): 180
Operating Temp (°F): -31 to + 131 F
Operating Temp (°C): -35 to +55 C
Width: 4.00 (10.16cm)
Height: 4.00" (10.16cm)
Depth: 0.73" (1.84cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
92.34 |
|
|
Aurora LED Dome Light - White Finish - White/Red Dimming
Customers told us they wanted a high quality LED replacement for the ubiquitous dome light. It had to be bright, with wide even light. They wanted a clean look, an intuitive and reliable switch, and a notable level of quality. We delivered, and then added IP67 immersion protection. We then raised the bar with multiple color output options and dimming. Lumitec's Aurora Dome Light stands apart.
Specifications:
Voltage: 10 - 30V DC
12V DC Amps: 290mA
24V DC Amps: 160mA
Correlated Color Temperature: 5000
Color Rendering Index: 70+
Rated Watts: 4
Lumens (White): 180
Operating Temp (°F): -31 to + 131 F
Operating Temp (°C): -35 to +55 C
Width: 4.00 (10.16cm)
Height: 4.00" (10.16cm)
Depth: 0.73" (1.84cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
92.34 |
|
|
Slim 5" Dome Light - Warm White/Blue - 10-30V
This low-profile dome light has warm white and blue LEDs.
Features:
12/24V, 6W
390 Lumens
26 Color LED (blue)
Surface mount
IP65
Touch switch
Switch glows blue
Specifications:
Dimensions: 5 in. diameter & 1/2 in. height
*The "P" within the part number indicates retail packaging
|
28.86 |
|
|
Slim 5" Dome Light - Warm White/Red - 10-30V
This low-profile dome light has warm white and red LEDs.
Features:
12/24V, 6W
390 Lumens
26 Color LED (red)
Surface mount
IP65
Touch switch
Switch glows blue
Specifications:
Dimensions: 5 in. diameter & 1/2 in. height
*The "P" within the part number indicates retail packaging
|
28.86 |
|
|
Dome Light
Exterior Surface Mount Dome Light
w/ Red & White Bulbs
Construction
Ivory PERKO Kote Zinc Alloy
Three Position Toggle Switch
12v Bulbs Included
|
74.00 |
|
|
Surface Strip Light w/Switch - White LED - 12V
The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications.
Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.
The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.
Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.
These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.
Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Color Temperature: 5000K (White) 2700K (Warm White)
Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V )
Operating Voltage: 12V DC or 24V DC
Dimming: Hella marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
|
62.28 |
|
|
Surface Strip Light w/Switch - White/Red LEDs - 12V
The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications.
Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.
The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.
Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.
These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.
Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Color Temperature: 5000K (White) 2700K (Warm White)
Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V )
Operating Voltage: 12V DC or 24V DC
Dimming: Hella marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
|
68.35 |
|
|
Surface Strip Light w/Switch - White/Blue LEDs - 12V
The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications.
Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.
The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.
Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.
These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.
Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Color Temperature: 5000K (White) 2700K (Warm White)
Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V )
Operating Voltage: 12V DC or 24V DC
Dimming: Hella marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
|
69.88 |
|
|
Surface Strip Light w/Switch - Warm White/Red LEDs - 12V
The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications.
Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.
The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.
Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.
These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.
Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Color Temperature: 5000K (White) 2700K (Warm White)
Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V )
Operating Voltage: 12V DC or 24V DC
Dimming: Hella marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
|
69.88 |
|
|
Surface Strip Light w/Switch - Warm White/Blue LEDs - 12V
The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications.
Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.
The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.
Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.
These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.
Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Color Temperature: 5000K (White) 2700K (Warm White)
Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V )
Operating Voltage: 12V DC or 24V DC
Dimming: Hella marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
|
69.88 |
|
|
Aurora - LED Dome Light - Polished Stainless Steel Finish - White Dimming
Customers told us they wanted a high quality LED replacement for the ubiquitous dome light. It had to be bright, with wide even light. They wanted a clean look, an intuitive and reliable switch, and a notable level of quality. We delivered, and then added IP67 immersion protection. We then raised the bar with multiple color output options and dimming. Lumitec's Aurora Dome Light stands apart.
Specifications:
Voltage: 10 - 30V DC
12V DC Amps: 290mA
24V DC Amps: 160mA
Correlated Color Temperature: 5000
Color Rendering Index: 70+
Rated Watts: 4
Lumens (White):180
Operating Temp (°F): -31 to + 131 F
Operating Temp (°C): -35 to +55 C
Width: 4.00 (10.16cm)
Height: 4.00" (10.16cm)
Depth: 0.73" (1.84cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
97.98 |
|
|
10" Cabin Light with Switch - White & Blue - 10-30V
This surface-mounted cabin light features a touch-switch operation. Offering two colors, warm white and blue, this light provides ample output for reading and activities or just the right amount of blue light for ambiance. Touch the touch switch once to turn on the white light; touch the switch again to switch to the blue light. Composite end caps hide mounting screws for a finished look.
Features:
Works with 12V and 24V systems.
Touch switch
Surface mount
10-30VDC - 7.6 Watt
IP67
Specifications:
LEDs: 33 White, 30 Blue
Lumens: 760 (White), 123 (Blue)
*The "P" within the part number indicates retail packaging
|
39.49 |
|
|
4" Locker Light with Touch Switch - 10-30V - Stainless Steel
This compact locker light is small enough to mount almost anywhere where light is needed. Designed to illuminate the inside of lockers, hatches, closets, and/or bilges. The light features a 316 stainless steel trim ring and a built-in on/off switch that is backlit with a blue LED so that it is easily located even in the darkest of lockers. A touch-switch sensor immediately turns on the light when activated.
Features:
IP65 rated for installation in wet lockers
Works with 12V and 24V systems
Impact-resistant plastic lens
316 Stainless Steel Trim Ring
6 Warm White LEDs (2900-3200K)
Surface mount, 2 SS Screws included
Specifications:
10-30V
Amps: 0.03
Lumens: 210
*The "P" within the part number indicates retail packaging
|
27.35 |
|