|
T83FC Zero Torq Rotary Helm Single Cable Steering
T83FC has a tilt range of 48° and five locking positions, fast to get connected and easily installed with a planetary gear design and 3.8 approx steering wheel turns lock to lock.
Features:
Tilt range of 48° and five locking positions
Fast connect, simple installation
The tilt device eliminates under-dash movement
Standard 3/4” tapered shaft – stainless steel
All stainless steel cable output ends
Corrosion resistant materials
T83NRFC steering system is not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat
X52 tilt mechanism fits Ultraflex tilt mount rotary and rack and pinion steering helms as well as Ultraflex tilt mount hydraulic pumps except SilverSteer™ and MasterDrive™ steering systems
For boats faster than 50 mph, our hydraulic steering systems are recommended
Optional steering wheel
Engine connection kits
Exceeds EN 28848 safety standards
Exceeds ABYC P17 safety standards
Specifications:
M66 steering cable stroke: 228 mm (9")
Lock-to-lock steering wheel turns: Approx. 3,8
Max. dash depth: 25,4 mm (1")
Max. steering wheel diameter: 406 mm (16")
Min. steering cable bend radius: 200 mm (7.9")
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
246.48 |
|
|
T93 Zero Torque Rotary Steering Helm
This is a Uflex Zero torque Single cable steering helm (T93ZT).
Features:
Specifically designed for high-performance and high-efficiency applications
Corrosion resistant materials
Particularly suitable when clearance is limited
Minimal feedback
T93ZT steering system is not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat
For boats faster than 50 mph, our hydraulic steering systems are recommended
Bezel not included - to be ordered separately
T93ZT is also available in a package with FOURTECH-ZTF
Exceeds EN 28848 safety standards
Exceeds ABYC P17 safety standards
Specifications:
Standard 3/4” tapered shaft
Lock-to-lock steering wheel turns approx 4,2
Max. steering wheel diameter 16-inches (406 mm)
|
198.64 |
|
|
Zero Torque Rotary Steering Helm
Zero torque single cable steering helm
T103ZT steering systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat
|
243.91 |
|
|
Type S for Straight Shaft Helms for Cable Steered Boats with Dash Mounted Wheel
Features:
Replaces existing helm
Electronic clutch disengages for manual steering
Rotary drive system
Fits behind dash
Safety override technology
Current 1.25A Typical, 5A Peak
Wireless control module plus handheld pendant - steering in the palm of your hand
Steer, fish and cruise from anywhere on the boat
Easy DIY installation - no need for professional installer
2 Year limited warranty - purchase with confidence
Specifications:
Wireless Controller & Receiver
Meets FCC standards
Additional Handheld and receiver can be paired in field
Pendant and receiver auto-off in 30 minutes if no usage
Over 1 Million control codes provide enhanced security
Handheld Pendant
Water proof
Supplied with 2xAAA batteries
Includes lanyard
Wireless Receiver & Motor Controller
Waterproof
Motor drive capability up to 25A
Overload protection
Reverse polarity protection
12V DC nominal (9V min - 16V max operating range)
Offers pass-through capability for Autopilot motor and clutch control circuits
|
945.89 |
|
|
Single Cable Steering Helm
T71FC - helm
FEATURES AND TECHNICAL SPECIFICATIONS:
Fast connect, simple installation
All stainless steel cable output ends
Corrosion resistant materials
Particulary suitable where clearance is limited
Standard 3/4" tapered shaft
Lock-to-lock steering wheel turns: approx. 3,8
Stroke: 9" (228 mm)
Maximum allowable steering wheel diameter: 16" (406 mm)
Minimal feedback
Compact for mounting
**The wheel is not included
|
87.07 |
|
|
Tilt Rotary Steering Helm
Single cable steering helm - not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat
|
179.81 |
|
|
T91 Single Rotary Steering Helm
This is a Uflex single cable steering helm made of high-quality materials.
Features:
Specifically designed for high-performance and high-efficiency applications
Corrosion resistant materials
Particularly suitable when clearance is limited
Minimal feedback
T91 steering system is not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat
For boats faster than 50 mph, our hydraulic steering systems are recommended
Bezel not included - to be ordered separately
T91 is also available in a package with FOURTECH
Exceeds EN 28848 safety standards
Exceeds ABYC P17 safety standards
Specifications:
Standard 3/4” tapered shaft
Lock-to-lock steering wheel turns approx 4,2
Max. steering wheel diameter 16-inches (406 mm)
|
126.61 |
|
|
NaviTech™ Power Steer Assembly
Now you can get the same technology used to drive the most powerful and best handling cars for your boat.
Taking the latest technology from the automotive industry, Ultraflex has combined Electronic Power Steering (EPS) used in the most popular cars in the world with the latest mechanical steering helms and Mach 90 high efficiency steering cable to deliver unprecedented performance.
Perfectly silent, the system draws minimal power and furtheremore is very easy to install.
The NaviTechTM also has Integrated System Monitoring (ISM) which detects certain operating conditions including the number of cycles and notifies the end user with a vibration signal in the steering wheel if the cable needs to be changed. Never before has a steering system monitored it’s own operating conditions and given the driver diagnostic feedback.
For specific applications Ultraflex can use programmable software to dial in the hand wheel effort and steering output to meet specific performance objectives of boat builders.
A Complete Steering System Consists of:
Power assisted steering helm: T91NAV - 43207S - single cable steering helm
Tilt mechanism: X66 - 40613M - Tilt mechanism for NaviTechTM tilt mount helms. Tilt range of 48° and five locking positions
Steering cable: M90 Nav (patented)
ATTENTION: M90 Nav steering cable is suitable for use also with T71FC, T72FC, T73NRFC, T81FC, T82FC, T83NRFC, T91, T93ZT, T101, T103ZT. Ultraflex steering helms. M66 will not fit the following Uflex helms: T91, T93ZT, T101, T103ZT.
Optional steering wheel
Features and Technical Specifications:
Automotive steering effort and response
100% Balanced steering - Port to Starboard / Starboard to Port
Silent Operation
Monitoring software with integrated cycle counter, for a correct cable replacement.
By haptic feedback on the wheel, the system is able to signal anomalies, such as:
Excessive cable load
Stuck cable alarm
Field tested for over 3 years
16 Nm of assist torque capability
Able to tune on center and end of travel torque effort
Consistent steering assist through all vessel speed ranges
Applied in leading automotive application since 2011. Nowadays automotive production is over 1 million units per year
10 - 15 VDC
8 - 15 A nominal current during steering maneuvers
Supplied with 10 ft electrical harness. It needs a 40 A fuse (to be ordered separately).
Validation for Marine application is per CE, ABYC P17, P27, and ISO 25197
NMMA Type Acceptance Completed
Limit of Applications:
Outboard engines:
Up to 150 hp, maximum 50 mph, no jackplates
|
2162.65 |
|
|
Fourtech 6' Black Mach Rotary Steering System with Helm, Bezel & Cable
Fourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation.
Kit Includes:
T91 Helm
X34 - 90° bezel
M90 Steering Cable - 6'
|
200.24 |
|
|
Fourtech 7' Black Mach Rotary Steering System with Helm, Bezel & Cable
Fourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation.
Kit Includes:
T91 Helm
X34 - 90° bezel
M90 Steering Cable - 7'
|
200.24 |
|
|
Fourtech 8' Black Mach Rotary Steering System with Helm, Bezel & Cable
Fourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation.
Kit Includes:
T91 Helm
X34 - 90° bezel
M90 Steering Cable - 8'
|
200.24 |
|
|
Fourtech 9' Black Mach Rotary Steering System with Helm, Bezel & Cable
Fourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation.
Kit Includes:
T91 Helm
X34 - 90° bezel
M90 Steering Cable - 9'
|
200.24 |
|
|
Fourtech 10' Black Mach Rotary Steering System with Helm, Bezel & Cable
Fourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation.
Kit Includes:
T91 Helm
X34 - 90° bezel
M90 Steering Cable - 10'
|
200.24 |
|
|
Fourtech 11' Black Mach Rotary Steering System with Helm, Bezel & Cable
Fourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation.
Kit Includes:
T91 Helm
X34 - 90° bezel
M90 Steering Cable - 11'
|
200.24 |
|
|
Fourtech 12' Black Mach Rotary Steering System with Helm, Bezel & Cable
Fourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation.
Kit Includes:
T91 Helm
X34 - 90° bezel
M90 Steering Cable - 12'
|
200.24 |
|