|
1-2-120 Battery Isolator
This heavy-duty isolator allows multiple batteries to charge automatically from one or two alternators and prevents the discharge or ‘dumping” of one battery into another. Each battery is charged according to its need without overcharging and is rated for 12-, 24-, or 36-volt, negative ground DC systems. This model is a 120-amp alternator.
Features:
Conservatively rated diodes and a rustproof anodized aluminum heat sink case
Heavy duty construction
Rated for systems up to 48 volts DC, negative ground
Rust-proof anodized aluminum case
Stainless steel mounting hardware provided
Protective covers provided for terminals
Specifications:
Operating Temperature: -40 to +80°
Duty Cycle: Continuous rating to 50° C Derate linearly to 70% @ 80° C
Temp. Rise: 5° C at full rated current (mount vertically for optimum cooling)
Voltage Drop: 0.7V @ 50% load, 0.9V @ full load
Alternator Sources: 1
Battery Bank: 2
Max. Amperage Input Capacity: 120
Stud Terminal Size: 6mm
Dimensions (L x W x H): 6.5" x 4.5" x 3.1"
Weight: 3 lbs.
Note: These battery isolators are not compatible with self-exciting alternators. The alternator must have an external excitation lead. Please consult the manufacturer of your alternator if you are unsure of your configuration
|
167.87 |
|
|
1-3-165 Battery Isolator
This heavy-duty isolator allows charging multiple batteries automatically from one or two alternators and prevents the discharge or ‘dumping” of one battery into another. Each battery is charged according to its need without overcharging and is rated for 12-, 24-, or 36-volt negative ground DC systems.
Features:
Conservatively rated diodes and a rustproof anodized aluminum heat sink case.
Heavy-duty construction
Rated for systems up to 48 volts DC, negative ground
Rust-proof anodized aluminum case
Stainless steel mounting hardware is provided
Protective covers are provided for terminals
Specifications:
Alternator Sources: 1
Battery Bank: 3
Max. Amperage Input Capacity: 165
Stud Terminal Size: 6mm
Dimensions (L x W x H): 9 x 4.5 x 3.1 inches
Weight: 5 lbs.
Operating Temperature: -40 to +80 degrees
Duty Cycle: Continuous rating to 50 degrees C Derate linearly to 70% @ 80 degrees C.
Temp. Rise: 5 degrees C at full rated current (mount vertically for optimum cooling)
Voltage Drop: 0.7V @ 50% load, 0.9V @ full load
*Note: These battery isolators are not compatible with self-exciting alternators. The alternator must have an external excitation lead. Please consult the manufacturer of your alternator if you are unsure of your configuration
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
312.72 |
|
|
1-3-70 Battery Isolator
This heavy-duty isolator allows charging multiple batteries automatically from one or two alternators and prevents the discharge or ‘dumping” of one battery into another. Each battery is charged according to its need without overcharging and is rated for 12-, 24-, or 36-volt negative ground DC systems.
Features:
Conservatively rated diodes and a rustproof anodized aluminum heat sink case.
Heavy-duty construction
Rated for systems up to 48 volts DC, negative ground
Rust-proof anodized aluminum case
Stainless steel mounting hardware is provided
Protective covers are provided for terminals
Specifications:
Alternator Sources: 1
Battery Bank: 3
Max. Amperage Input Capacity: 70
Stud Terminal Size: 6mm
Dimensions (L x W x H): 3.25 x 4.5 x 3.1 inches
Weight: 2 lbs.
Operating Temperature: -40 to +80 degrees
Duty Cycle: Continuous rating to 50 degrees C Derate linearly to 70% @ 80 degrees C.
Temp. Rise: 5 degrees C at full rated current (mount vertically for optimum cooling)
Voltage Drop: 0.7V @ 50% load, 0.9V @ full load
*Note: These battery isolators are not compatible with self-exciting alternators. The alternator must have an external excitation lead. Please consult the manufacturer of your alternator if you are unsure of your configuration
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
186.37 |
|
|
2-3-120 Battery Isolator
This heavy-duty isolator allows charging multiple batteries automatically from one or two alternators and prevents the discharge or ‘dumping” of one battery into another. Each battery is charged according to its need without overcharging and is rated for 12-, 24-, or 36-volt negative ground DC systems.
Features:
Conservatively rated diodes and a rustproof anodized aluminum heat sink case.
Heavy-duty construction
Rated for systems up to 48 volts DC, negative ground
Rust-proof anodized aluminum case
Stainless steel mounting hardware is provided
Protective covers are provided for terminals
Specifications:
Alternator Sources: 2
Battery Bank: 3
Max. Amperage Input Capacity: 120
Stud Terminal Size: 6mm
Dimensions (L x W x H): 12.5 x 4.5 x 3.1 inches
Weight: 5 lbs.
Operating Temperature: -40 to +80 degrees
Duty Cycle: Continuous rating to 50 degrees C Derate linearly to 70% @ 80 degrees C.
Temp. Rise: 5 degrees C at full rated current (mount vertically for optimum cooling)
Voltage Drop: 0.7V @ 50% load, 0.9V @ full load
*Note: These battery isolators are not compatible with self-exciting alternators. The alternator must have an external excitation lead. Please consult the manufacturer of your alternator if you are unsure of your configuration
|
433.13 |
|
|
2-Bank Battery Isolator, 200A, 40V
Analytic Systems introduces the IBI (Ideal Battery Isolator) for 1, 2 and 3 bank battery systems, allowing all the batteries to be fully charged from a single alternator while maintaining electrical
isolation between the battery banks or between a vehicle and trailer.
Ideal Diode technology uses MosFet Transistors and control circuitry to replace the diode used in a traditional battery isolator and reduces the voltage drop across the isolator to a mere 160 millivolts at 200 Amps of charging current and essentially zero volts at low current, so all the power of the alternator is applied to the batteries ensuring a full recharge every time.
While the Ideal Battery Isolator is designed to be used with an alternator, it can also be used to convert a single bank battery charger to a 2 or 3 bank charger or as a pure diode between a vehicle and trailer or other remote load.
Features:
Waterproof Expoxy Sealed Construction
Easy Connection
Alternator/Charger post 5/16", Battery Post 1/4"
Most Efficient use of Available Alternator Output
Maximize Battery Performance
Three year parts and labour warranty
|
273.55 |
|
|
Ampco Pumps P1GXPIP-1/2 Plastic Cap Plug
|
3.65 |
|
|
Fill-Rite 901-N-1 1/2 901 Meter Nickel Plated 1.5
Fill-Rite Flow Meter 6-40GPM 1 1/2"FNPT Ports
|
548.25 |
|
|
March TE-7S-MD 1.5hp 3 phase
March Pump's industrial TE-7S-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 53 gallons per minute at 10 feet, and its maximum head is 57.5 Feet (or around 25PSI). The standard wet end (the materials that come into contact with the solution) is composed of 316 Stainless Steel, Viton, Carbon, and Ceramic. The inlet connection is 1-1/2 inch female pipe thread, and the outlet is 1 inch male pipe thread. There are two standard motors. The first is a 1 Phase 60 hertz 115/208/230V and 50 hertz 110/220V 1 horsepower totally enclosed fan cooled motor. The second is a 3 Phase 60 hertz 208/230/460V and 50 hertz 190/380V 1 horsepower totally enclosed fan cooled motor. There are performance differences between the hertz options. The maximum internal pressure the pump can tolerate is 200PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. The March TE-7S-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March TE-7S-MD is suitable for your application, please contact March Pump.
Perfect for Applications Including;
Applications for the TE-7S-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.
Great for Chemicals Including
The TE-7S-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Potassium Chloride, Potassium Hydroxide, Sodium Chloride, Sodium Hydroxide (Caustic Soda), Fresh Water, Salt Water, and many more chemicals.
Unit 60HZ 50HZ System US Metric US Metric Max Flow
53 GPM
200 LPM
47.5 GPM
180 LPM
Max Head
57.5 FT
17.5 M
39.4 FT
12 M
Power
1 HP
.745 KW
1 HP
.745 KW
Electrical
1PH 115/208/230V 60HZ, 110/220V 50HZ or 3PH 208/230/460V 60HZ, 190/380V 50HZ
On 50HZ, the Single Phase Motor is rated for 1 horsepower or 0.7457 kilowatts.
On 50HZ, the Three Phase Motor is rated for 1 horsepower or 0.7457 kilowatts.
Type
Centrifugal Mag Drive
Inlet
1-1/2"FPT
Outlet
1"MPT
Wet End
316 Stainless Steel (Front Housing, Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing)
Motor Options
Available in 1HP, 1.5HP, 1HP Explosion Proof or 1.5HP Explosion Proof
P/N
0155-0173-0300 (1 Phase 1HP) with Metal Motor Bracket
P/N
0155-0174-0300 (3 Phase 1HP) with Metal Motor Bracket
P/N
0155-0036-0300 (3 Phase 1.5HP) with Metal Motor Bracket
P/N
0155-0285-0100 (1 Phase 1HP) with Plastic Motor Bracket
P/N
0155-0286-0100 (3 Phase 1HP) with Plastic Motor Bracket
P/N
0155-0287-0100 (3 Phase 1.5HP) with Plastic Motor Bracket
|
2829.86 |
|
|
BURKS T350G6-1 1/2, CENTRIFUGAL PUMP 3PH 5HP TEFC
Close Coupled, 60 Hz, Three Phase, 3500 RPM, 5 Horsepower, TEFC Motor Enclosure, Frame Size 184JM
UNSPSC Code: 40150000
|
3661.31 |
|
|
Ampco Pumps KC2 2 1/2 X 2 Fluid End Nialbz 5.00" Trim
|
3440.34 |
|
|
Bosworth 400-H-Ale-1/2"F Guzzler 1/2" Hand Pmp,Tappd
Bosworth Hand Diaphragm Pump Guzzler Delrin, .44Qt per Stroke, 1/2" Female Threaded Ports, Buna Flapper Valves and Diaphragm, Horizontal Handle with Epoxy Coated Aluminum Clamp Ring for Durability
|
108.13 |
|
|
Fill-Rite 901-1 1/2 Flow Meter
Fill-Rite Flow Meter 6-40GPM Nickel Plated 1 1/2”FNPT Ports
|
465.21 |
|
|
BURKS GNB6-1-1/2-6.25 CENTRIFUGAL PUMP
BURKS Model: GNB6-1-1/2-6.25
Burks Frame Mounted End Suction GNB Series Pump
Bronze Fitted, 6.25" Bronze Impeller
2" Suction & 1 1/2" Discharge
Carbon / Ceramic / SS Buna-N Shaft Seal
Maximum Temperature of 225°F (107°C)
Application: Waste Treatment and Plating
Ships Via Truck please us the Contact Us page to get a Freight Quote.
|
3273.19 |
|
|
March 893-11-1/2 +Pump/12V Mtr 1/2"Ports
This item is 'build to order'. Please contact us for lead time.
|
383.19 |
|
|
Applications for the March AC-1A-MD-1/2 Magnetic Drive Pump include chemical transfer, photographic processing equipment, refrigeration systems, and water displays.
The AC-1A-MD-1/2 Part # 0115-0064-0100 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The AC-1A-MD-1/2 may have been modified to handle these chemicals.
March Pump's industrial AC-1A-MD-1/2 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.5 inch smooth, and the outlet is 0.5 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-1/2 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
3 GPM
9 LPM
Max Head
4.6 FT
1 M
Power
.005 HP
.003 KW
Electrical
115V 60HZ 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1/2"OD
Outlet
1/2"OD
Wet End
Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet
Part # 0115-0064-0100
|
224.25 |
|