NP-24 Nav-Pac - 24V Marine communication and navigation electronics such as programmable data transceivers, GPS, and other microprocessor-controlled devices require clean and steady DC input power. Their sensitive circuitry is highly vulnerable to voltage drops from engine starts, noise and line spikes from alternators and motors, and noise from various other electronic devices. NAV-PAC prevents these conditions from affecting electronics. Features: Prevents voltage “drop-out” during engine start and/or other high intermittent loads such as Thrusters Absorbs line “spikes” Filters out electrical interference Provides supplemental voltage and battery backup for up to 15 min. Optional remote panel (773-5037-0) Specifications: Output: 24 Volt @ 15 amps max. Battery: Sealed Rechargeable 5.0 Amp-Hour, 5-7 years of typical life, can be replaced. A low-voltage disconnect circuit protects the battery from total discharge. Certified by DOT and IATA for shipment by air. Noise Filtering: Audio through 200 MHZ Voltage Spike Protection: Transient energy capability; 100 Joules, 4,000 amps Max (8 x 20 microseconds) Back-Up Power: 8A for 15 minutes, 12A for 8 minutes, and 18A for 2 minutes Size: 6.0 x 6.75 x 7.5 inches (13.3 X 17.14 X 19 cm) Weight: 8 lbs. (3.6 kg) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

NP-12 Nav-Pac - 12V Marine communication and navigation electronics such as programmable data transceivers, GPS, and other microprocessor-controlled devices require clean and steady DC input power. Their sensitive circuitry is highly vulnerable to voltage drops from engine starts, noise and line spikes from alternators and motors, and noise from various other electronic devices. NAV-PAC prevents these conditions from affecting electronics. Features: Prevents voltage “drop-out” during engine start and/or other high intermittent loads such as Thrusters Absorbs line “spikes” Filters out electrical interference Provides supplemental voltage and battery backup for up to 15 min. Optional remote panel (773-5037-0) Specifications: Output: 12 Volt @ 20 amps max. Battery: Sealed Rechargeable 5.0 Amp-Hour, 5-7 years of typical life, can be replaced. A low-voltage disconnect circuit protects the battery from total discharge. Certified by DOT and IATA for shipment by air. Noise Filtering: Audio through 200 MHZ Voltage Spike Protection: Transient energy capability; 100 Joules, 4,000 amps Max (8 x 20 microseconds) Back-Up Power: 8A for 15 minutes, 12A for 8 minutes, 18A for 2 minutes, and 20A for 1 minutes Size: 5.25 x 6.2 x 7.4 inches (13.3 X 15.7 X 18.8 cm) Weight: 5.9 lbs. (2.7 kg) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Johnson 57151-24 Shower Pump 24V

Toilet Standard Electric EVO Compact - 24V Standard electric compact toilet with a combined electrical 24V macerator and pump for waste disposal and flushing in one single operation. Including one touch electrical control panel. Easy to clean white ceramic bowl and white wooden seat. Stable base for robust installation. Port conections inlet 19mm (3/4″), outlet 25mm or 38mm (1″ or 1,5″). Plug & play/ interchangeable with Jabsco 37010-0096, Johnson Pump 80-47435-02 and other single operated electrical toilet models. Specifications: Weight: 9 kg/24 lbs Dimensions: 420/16.5L x 390/15.35H x 335/13.2W mm/in  Type: Single Operation Electric *Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance

24/75, 75A, 24V Battery Charger The right choice for demanding conditions Mass battery chargers are designed for the toughest conditions for professional, semi-professional, and recreational purposes. Even under the most extreme conditions, the products from the Mass series operate faultlessly, giving you round-the-clock output when necessary. The sustainability and technologies that underpin the Mass concept have long been proven in practice. With an MTBF of 180,000 hours at full capacity and 24/7 use, the Mass products are ideal for the toughest tasks and any situation that requires a reliable power supply.  Features: Designed for the most difficult conditions. Lightweight, stainless steel, anodized aluminum casing. Coating of internal components prevents damage from dampness or condensation to ensure a longer lifespan. Insensitive to electromagnetic effects from other devices. Suitable for every type of battery, also charges flat batteries. Delivered as standard with temperature sensor. Full power at temperatures of up to 40. Load capacities from 80 to 1000 Ah or more. Stable and ripple-free power supply, even without batteries. The Current Control function prevents the breakdown of fuses when the voltage drops. Parallel switching is possible using multiple battery chargers. Connections by CE, ABYC A-31, and IEC60945. GMDSS models and panels are available. Certified by RRR, RMRS (does not apply to 24/75 120 V). Certified by DNV GL (only 24/25, 24/50, 24/75, 24/75 (120 V), 24/100 models). GMDSS Compatible The Mass series is designed for the most demanding situations. To help you comply with SOLAS regulations, all Mass battery chargers are GMDSS compatible. GMDSS stands for Global Maritime Distress and Safety System and allows users to monitor various alarm functions. GMDSS versions of the Mass 24/25 DNV, Mass 24/50, Mass 24/75, Mass 24/100, and Mass 24/100-3ph are available. A separate remote panel is available, which is compatible with all Mass battery chargers. A single front display with GMDSS remote panel is available for:      Mass 24/25-2 DNV Mass 24/50-2 Mass 24/75, Mass 24/100, Mass 24/100-3ph Charging Lithium Ion batteries Although Lithium-ion batteries are increasingly popular, there can be a lack of clarity when it comes to the charging process. This is not a problem with Mastervolt as the Mastervolt battery chargers communicate directly with the Lithium Ion battery via the integrated MasterBus (or have been adapted to the required charging voltages). MasterBus compatible Mass battery chargers can be easily connected to a MasterBus network with only one cable and one connection. You can also choose central, local, or remote monitoring, configuration, and control of your system. Made tough by smart design  The certified Mass battery chargers are very strong and designed to withstand heavy vibrations and shocks. Their premium quality components meet the highest possible specifications, while the smart and extra robust mounting adds to the professional result. Specifications: Nominal output voltage: 24 V Total charge current: 75 A at 28.5 V Number of battery outlets: 1 Battery bank size: 150-750 Ah Nominal input voltage: 230 V (180-265 V), 50/60 Hz Power supply mode: yes Galvanic isolation: yes Display/read-out: LED display Dimensions, hxwxd: 420 x 318 x 130 mm, 16.5 x 12.5 x 5.1 inch Weight: 7.7 kg, 17.0 lb Compliance: CE, ABYC A-31, RRR, RMRS, DNV GL

Reversing Solenoid Pack - 24V Maxwell Reversing Solenoid Pack 24V, replaces P19046.

Marine Toilet Silent Electric Compact - 24V Silent electric compact toilet with seperated flushing and waste disposal cycle. Including electronic 3 function control panel, before use, after use and short use plus a trimmer to regulate the flow rate. Water is from existing pressurized water system onboard with 24V solenoid valve (PN 07-66-031) or 24V flush pump (PN 07-66-033)- not included! Silent operation and low water consumption. Easy to clean white ceramic bowl and white wooden seat. Port conections inlet 19mm (3/4″), outlet 25mm or 38mm (1″ or 1,5″). Stable base for robust installation. Plug & play/ interchangeable with Jabsco 37045-0094, Johnson Pump 80-47231-02 and other 24V dual cycle electrical toilet models. Specifications: Weight: 8.7 kg/22 lbs Dimensions: 420/16.5L x 390/15.35H x 335/13.2W mm/in  Type: Dual Operation Electric  *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance

NaviLED Compact 2nm Towing Navigation Lamp - Black Shroud Ultra durable, power saving LED navigation lamps for enhanced safety. NaviLED  lamps are proven worldwide on commercial, military and recreational vessels. Ultra low current draw NaviLED lamps use less than 10% of the power required to run a bulb navigation lamp of the same visible distance. Port and Starboard lamps consume less than 2 watts combined ! No bulbs, No maintenance. Ultra long service life Hella marine LED technology has no filaments to break making NaviLED lamps extremely shock and vibration proof for reliability and safety in demanding conditions. MultivoltTM 9-33V DC Advanced electronics ensure reliable illumination and lamp protection even under severe voltage fluctuations and low battery voltages. Safe and highly visible Hella marine optics deliver 100% correct light output and enhanced visibility compared to bulb navigation lamps. Fully sealed for life. IP 67 Certified Each NaviLED lamp is a completely sealed unit. High impact housings ensure durability from waves and impact. Pre-wired with marine cable Single core (120mm) or twin core (2.5m) sheathed marine cable assemblies available. Ensures time saving, completely sealed installations.

AquaT Toilet Silent Electric Compact - 24V The fine finish and thought-through design of this toilet are remarkable. Made from white vitreous porcelain and with corrosion-resistant parts throughout, this AquaT toilet is quiet and easy to clean. The silent electric model is shipped with a well-proven Aqua Jet diaphragm pump. The AquaT is far from ordinary. Quiet, hygienic, and reliable, the AquaT marine toilet is perfect for almost any marine toilet room.  Features: Compact electric marine toilet made from white vitreous porcelain Corrosion-resistant parts throughout Proven 24V Aqua Jet diaphragm pump Quiet, hygienic, reliable Two-way switch Specifications: Weight: 21 lbs.

Ritchie N-203-C Compass Cover f/Navigator & SuperSport Compasses - White Protective cover for Navigator and SuperSport compasses. For: DNP-200, DNB-200, DNW-200, FN-201, FNW-201, FN-203, FNW-203, SS-2000, and SS-2000W Approx. Shipping Weight: 1lb (454g)

LightArmor All-Round 24" Navigation Light for Powerbase On boats under 12 m (39 ft), the All-round light must be located a minimum of one meter above the red-green sidelights, measured at the center of the light source of the appliances. Also, this navigation light can be adjusted for angled applications. Features: (inch) 24" All-Round Pole Light Articulating head adjusts from 15° fore to 15° aft (at, near, or toward the stern of a ship) Rated for 50,000 hours of use 5-year warranty Two miles 360º light visibility for boats up to 12 m (39 ft) Meets ABYC & USCG requirements and all applicable standards *Compatible only with the Attwood PowerBase (6100-LT-7)

From now until December 31st, 2011, enjoy FREE unlimited updates when you purchase Navionics Hotmaps Premium, Hotmaps Platinum, Fish'N Chip, Gold or Platinum Plus products. See our complete Navionics line at http://www.clrmarine.com/462m4/cartography-navionics.html   Otterbox has not released there new product yet. Our Distributor has 800 OTTERBOX DEFENDER SERIES APPLE IPOD TOUCH 4TH GENERATION on order and have 499 of those commited to customers at this time.  See all 225 Otterbox items at http://www.clrmarine.com/462m4/manufacturers/otterbox.html

12V-24V 7 Amp Converter for DRS12AX X-Class Open Array - Newmar Newmar 12-24-7 Step Up Dc-Dc Converter 7amp Conitnuos These "UP" converters produce 24 volts from 12 volt systems and are ideal for managing dual voltage applications on marine vessels without having to install a 24 volt battery and dedicated charging system. Choose from two types depending on your application: In the Standard, Non-Isolated Series the 12V input and 24V output share a common negative ground and are ideal when installing certain electronics that operate better on 24 volts when a robust 12 volt system exists. Models available in outputs of 7, 16 and 25 amps. Standard, Non-Isolated Series Intended for use on negative ground systems 10 -15 VDC input range 7 Amp output Current limited, voltage spike suppression, automatic thermal shutdown and recovery Specifications: Input: 10 - 15V DC Output: 27.2 VDC +/-5% at extreme temperature load, input, tolerance, etc. Ripple: <100mV P-P Regulation: +/- 5% Line/Load Duty Cycle: Intermittent: 2 minutes, 20% duty Continuous: 24 hours, 100% duty Operating Temp: -25º - 30º C, derate linearly from 30 to 0% @ 80º C Mechanical Efficiency: 93% - Typical. Anodized aluminum, glass filled polycarbonate, dust water and impact resistance to IP533 Front panel terminal block Output indicator: Green LED WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Attention Sailers!!! Do you have a Binnacle mounted compass that is looking really bad? Now is the time to update to a New Ritchie DNP-200 Navigator Compass. We have one in stock in our clearance section selling for have the price. Ritchie Navigator Compass Navigator Compass Features: 4-1/2" PowerDamp Flat Card Dial with Large Numerals Brushed Stainless Housing Ideal for both Power and Sail Boats Fits all Popular Sailboat Steering Pedestals Exclusive Built-in Green NiteVu Night Illumination Built-in Compensators to Easily Adjust for Deviation Scientifically Matched Sapphire Jewel and Hardened Steel Pivot Dial Movement Internal Gimbal Systems for Maximum Stability During Adverse Pitch and Roll Conditions Powerful DirectiveForce Magnets for Fast Heading Lock-on Movable Sun Shield 45 Degree Lubber Lines High Temperature Construction for Extended Operating Range Custom Fitted Protective Covers Available (weather shield model no. WS-P) Easily Installed, Fits 5.25" (13.35 cm) Mounting Hole 100% Repairable Exclusive 5-Year Ritchie Warranty   Get it today before it's gone at  https://www.clrmarine.com/m4/10377--ritchie-dnp-200-navigator-compass-binnacle-mount.html

PTM-24-22 Charge Module - Only Use with PTMS The PTM charger provides a significant improvement in system reliability by utilizing multiple independent charger modules that plug into the unit, and should a fault occur in one module, the system continues to operate, thus being considered a “fault”. The system consists of a wall-mount case that serves as a connection point to AC input and battery output (3 banks) and contains three front-facing power bays, each accommodating a 22.5-amp charger module that slides and locks in place, creating a 24V, 67-amp charger.  Features: Individual Module (24 volt) Individual Module Specifications: Input Voltage/Frequency: 90-264 VAC; 47-63 Hz; derate linearly from 100% output @ 105 VAC to 80% output @ 90 VAC Input Current: 3 amps @ 230VAC; 6 amps @ 115 VAC Output Current: 22.5 amps max in Bulk Phase; 20 amps max in Absorption/Float Phases Power Factor: .96-.99 Efficiency: 85% typical Protection Features: Input Fuse, Output Fuse, Current Limiting, Over Voltage Protection, Cooling Fan, Automatic Thermal Shutdown/Recovery Status Indicators: Output OK/FAULT Weight: 6 lbs. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.