|
20M Radar Cable For Simrad's BR24, 3G/4G
Simrad's 20M Radar Cable is used for the BR24 Broadband radar, or 3G/4G. Simrad has introduced a revolutionary new radar system unlike anything else on the recreational boating market. Utilizing solid-state technology, this breakthrough technology provides superior target detection and separation, ease of operation, and a new level of navigational safety to a wide range of boats.
|
174.08 |
|
|
20M Radar Sensor Cable Assembly for DRS 2, 4 & 6
Furuno's cable assembly consists of two cables joined together as a Siamese cable. The data cable portion is supplied with RJ45 (Ethernet) connections on each end. The power cable portion is supplied with a 3-pin connector for the display end while the DRS end of the cable has no connector.
*Please note that this cable is for the NavNet 3D DRS sensors from 2kW to 12kW.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
463.63 |
|
|
20M VCAN BUS Cable Hub to Thruster
Features:
20M
VCAN BUS Cable
Hub to Thruster
|
127.90 |
|
|
MSK-EXT Extension Cable - 33' (10M)
Extension cable for use with MSK Series Portable Solar Charging Kits.
Features:
Extension cable for use with MSK Series Portable Solar Charging Kits
33 ft, 10m
Wire gauge AWG# 12
Connection: SB 50A, 600V
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
43.63 |
|
|
20M Shielded Ethernet Cable with RJ45 connectors
Cable measures 20 Meters (65') Other lengths available.
Use the RJ45 Ethernet cable when connecting your Apollo marine stereos to an Ethernet network.
Compatible with Fusion Apollo -
MS-RA770
MS-SRX400
MS-RA670
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
65.24 |
|
|
20M Power & Ethernet Cable for HALO 2000 & 3000 Series
Simrad's power and ethernet 20-meter cable specifically for the HALO 2000 and 3000 series.
|
202.80 |
|
|
N2KEXT Cable Micro-C - 10M Medium Duty Cable - N2K
NMEA 2000 Micro-C Medium duty cable. 10M (33 ft) Low loss 18 gauge cable recommended for network backbone runs.
|
87.38 |
|
|
25' Extension Cable
Easily extend the 50 cable included with the PowerMax™ 4KSBR-50U Small Building Repeater System. Only to be used with cables 50' or less in length.
25 of DA340 cable
Factory attached type N male and type N female connectors
|
109.04 |
|
|
OLAS GUARDIAN Extension Cable Set
The OLAS (Overboard Location Alert System) GUARDIAN Extension Cable Set can be used to extend the Power cable, the switch cable or both.
Designed for use on larger vessels where the ACR OLAS GUARDIAN hub needs to be located further from either the control switch or the power and kill switch connections.
Compatible With:
ACR OLAS Guardian system (P/N 2985)
In the Box:
One (1) 6 Pin Switch Cable - 29.5" (75 cm)
One (1) 5 Pin Power Cable - 29.5" (75 cm)
*Sold as an Individual
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
45.08 |
|
|
Extension Cable f/500 Series VHF/AIS Antennas - 10'
An easy solution to extending the cable on Digital Antenna's 500 series VHF and AIS antennas. Simply connect the included double mini-UHF male adapter between the 500 series antenna's mini-UHF female connector and the 500 series extension cable's mini-UHF female connector. The cable's other end accepts the 500 series antenna's PL-259 adapter.
All Extension Cables for 500 Series VHF/AIS Antennas Feature:
Our exclusive low loss, tinned braid, foil shielded, UV stable RG-8X marine cable
Factory attached mini-UHF female and mini-UHF female connectors
DA624 mini-UHF double male adapter
|
86.32 |
|
|
Extension Cable f/500 Series VHF/AIS Antennas - 20'
An easy solution to extending the cable on Digital Antenna's 500 series VHF and AIS antennas. Simply connect the included double mini-UHF male adapter between the 500 series antenna's mini-UHF female connector and the 500 series extension cable's mini-UHF female connector. The cable's other end accepts the 500 series antenna's PL-259 adapter.
All Extension Cables for 500 Series VHF/AIS Antennas Feature:
Our exclusive low loss, tinned braid, foil shielded, UV stable RG-8X marine cable
Factory attached mini-UHF female and mini-UHF female connectors
DA624 mini-UHF double male adapter
|
98.14 |
|
|
RealVision 3D Transducer Extension Cable - 3M(10')
RealVision 3D Transducer Extension Cables work with both the transom mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers. Each extension cable features a waterproof, twist-lock connector at the MFD end, and a compatible socket at the transducer end. For best performance, Raymarine recommends using no more than two (2) extension cables in any given cable run.
|
117.60 |
|
|
RealVision 3D Transducer Extension Cable - 5M(16')
RealVision 3D Transducer Extension Cables work with both the transom mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers. Each extension cable features a waterproof, twist-lock connector at the MFD end, and a compatible socket at the transducer end. For best performance, Raymarine recommends using no more than two (2) extension cables in any given cable run.
|
127.82 |
|
|
RealVision 3D Transducer Extension Cable - 8M(26')
RealVision 3D Transducer Extension Cables work with both the transom mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers. Each extension cable features a waterproof, twist-lock connector at the MFD end, and a compatible socket at the transducer end. For best performance, Raymarine recommends using no more than two (2) extension cables in any given cable run.
|
199.42 |
|
|
Bilge Sentry Extension Cable - 6M
Extension for the Water Module
The water module comes with a 1.5-meter cable connected directly to the sensor. If that cable cannot reach the bilge, then users will need this extension cable.
This extension cable has 5 pins and is 6 meters in length. The system supports extension with up to two extension cables (12m max).
Specifications:
Length: 6 meters
|
48.00 |
|