WR10 Wireless Pilot Controller- Bluetooth Bluetooth® wireless technology adds simple remote functionality to all autopilots. The WR10 Wireless Autopilot Controller is for Lowrance, Simrad and B&G. The wireless controller allows boaters to maintain complete control of their autopilot no matter where they are on the vessel. Features: Easy to retrofit with existing autopilot systems Components include wireless pilot controller, and waterproof Bluetoothr base station with Micro-C connection Compatible with Simrad, Lowrance and B&G autopilot systems The WR10 Wireless Pilot Remote has a series of clearly marked keys and an LED status light to allow for fast and accurate autopilot access. The wireless pilot controller remote has a range of 98 ft (30 m). The remote ships with lanyard and an optional wrist strap is available. Wireless Remote Functions: Mode: Toggles autopilot between Auto and Wind modes for Sailboats; Auto and No Drift (COG) modes for powerboats Course Change Keys: Port and Starboard keys for 1 degree (short press) or 10 degrees (long press) course change Standby: Switches the autopilot to Standby mode Auto: Engages the autopilot in Auto mode LED: provides flash notifications for key presses, acknowledged/not acknowledged commands and low battery

WR10 Wireless Autopilot Remote Only  WR10 Wireless Autopilot Remote is made of high-quality materials and designed using state-of-the-art technology.  It will meet your needs and deliver great quality at an affordable cost.  Features: Engineered to high standards High-grade design delivers extended lifespan Made with premium materials

Terrova 112/MDI/IP Trolling Motor with i-Pilot Link & Bluetooth - 36V-112lb-60" Now with built-in MEGA-DI: You can’t mark fish if you can’t see fish. And the best view of what’s below comes from Humminbird’s  MEGA Imaging™. So get a Humminbird’s eye view with a MEGA DI transducer built right into the lower unit of our most powerful, trusted motors. No cluttered wires, no clamps, and a transducer that’s protected from the elements. Just plug your fish finder into your motor to see what’s down there. Then go catch it.  No External Transducer - Messy wiring on an externally mounted transducer doesn’t just look bad: the transducer and wires are more susceptible to damage. With Built-In MEGA DI, the transducer is housed in the indestructible lower unit and all wiring runs through the shaft, for a clean, uncluttered look that’s protected from the elements. Humminbird MEGA Imaging opened the eyes of anglers everywhere by taking fish finding into the megahertz frequency for the first time. Now your Minn Kota® motor can deliver crystal clear MEGA Down Imaging of what’s directly below the bow, just the way it was meant to be seen.  In addition to MEGA Down Imaging, the Built-In MEGA DI transducer will also provide a CHIRP Digital Sonar, for precise, crystal-clear returns of fish, structure, and the bottom at all water levels. Sweeping multiple frequencies across a broad spectrum, this powerful tool eliminates noise for precisely defined targets.  Features: Lift-Assist Design:  A spring-loaded assembly on the Terrova mount makes stowing the trolling motor effortless, every time. Stow/Deploy Lever:  Press this lever on the mount and fallaway ramps will effortlessly slide your trolling motor into the water. And when you're ready to move, Lift-Assist helps the motor stow effortlessly. i-Pilot® Link™ Integrated GPS Trolling System:  i-Pilot® Link™ gives you unprecedented control over your boat by linking your trolling motor to your Humminbird® fish finder. Control your trolling motor from Link's color touch-screen remote or the Humminbird. You can set Spot-Locks, record paths, follow depth contours, automatically navigate to your favorite spots, control speed and steering, and more. Spot-Lock with Jog:  Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on the i-Pilot GPS that is pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the i-Pilot remote or Humminbird fish finder. AutoPilot™: Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot™, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves, and current. Heel-Toe Electric Foot Pedal:  Stow, deploy and adjust the trim on Terrova - all from the foot pedal. You can even activate Spot-Lock with one tap. Includes 18' cord. Push-to-Test Battery Meter:  Press a button on the trolling motor head to get an instant status of the battery life you have left. Digital Maximizer™:  Provides up to 5 times longer run time on a single battery charge. These variable-speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing. Weedless Wedge™ 2 Prop:  With swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge™ 2 is one of the most trusted props in fishing. Indestructible Composite Shaft - Guaranteed for Life:  At the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and we guarantee it for life. Mobile App Compatibility:  Control i-Pilot directly from your Apple® or Android™ device with our mobile app. You get quick command of speed, steering, Spot-Lock, and Advanced AutoPilot — plus the ability to update i-Pilot software.

S100 Wireless SeaTalk autopilot remote control S100 Wireless Autopilot Remote Compact and lightweight, the S100 remote delivers the freedom of wireless control to any Raymarine SeaTalk autopilot. The bright display is easy to read with two lines of text and a graphical autopilot mode indicator. The 5 button ergonomic keypad and intuitive menu structure provides simple operation and easy access to extended features. Rugged and waterproof the S100 fits in your pocket or clips to your belt, keeping full function autopilot control always within reach. S100 Features Two line display with a graphical autopilot status indicator Crisp, high contrast 24 x 127 dot matrix display Backlit display Raised profile on Standby button for easy identification in the dark Keylock security Convenient, replaceable AAA alkaline batteries No longer comes with Belt clip Wireless Features: Up to 32 feet (10 meters) wireless operating range from the base station Signal strength indicator Pre-registered each unit leaves the factory already registered to the base station S100 comes with Instruction Manual, S100 Controller, Base Station, Cradle, Lanyard The S100 wireless autopilot controller is compatible with the following Raymarine/Autohelm SeaTalk Autopilots: ST1000 ST2000 ST3000 ST4000 ST5000 SmartPilot ST6001 SmartPilot ST7001 SmartPilot ST8001 SmartPilot S1000

AP44 Autopilot Controller Rotary dial course adjuster, optically bonded 4.1" color display The AP44 Autopilot Controller combines Simrad Continuum steering technology with a full colour display, intuitive rotary dial and button controls, and modern glass helm styling. Free your hands from the wheel, cruise in comfort, and discover new ways to search for fish; this dedicated controller offers easy access to automated turn patterns, No Drift steering, depth contour tracking, and other advanced pilot features. Connect your chartplotter to add waypoint and route navigation, and enjoy full autopilot control from compatible Simrad displays. Features: Rotary-dial course adjustment with new intuitive autopilot control Optically bonded 4.1" color display Easy setup with auto tuning and calibration Simrad Continuum steering technology All new intuitive autopilot control Automated turn patterns No Drift steering Depth contour tracking Low-profile 'Glass Helm' design Low power consumption Certified NMEA 2000® connectivity Intuative Autopilot control The point of a dedicated autopilot controller is to enable immediate access to auto-steering functionality, placing key controls within easy reach. Designed with that purpose in mind, the AP44 includes an intuitive interface with just four buttons and a push-to-enter rotary control dial Automated turn patterns Your Simrad autopilot can do much more than keep you on course. The AP44 gives you easy access to a range of built-in turn patterns designed to assist with fishing, diving, or just making a quick and efficient U-turn. Simrad Continuum steeringB Every Simrad steering innovation builds upon a legacy encompassing over sixty years of autopilot development, which continues today at Simrad Yachting's autopilot research hub in Norway Easy setup with auto tuning and calibration Autopilot installation and commissioning doesn't have to be difficult or time consuming. The AP44 offers automatic tuning to ensure optimal auto-steering performance, with a simple on-screen commissioning process including dockside configuration and sea trial. Specifications: Dimensions: 118 x 115 x 28mm (4.6 x 4.5 x 1.1") Weight: 0.32kg (0.7lbs) Power Consumption: 1.8 Watts (MAX) Network Load: 3 LEN Color: Black Display Size: 4.1" (diagonal). 4:3 Aspect ratio Display Type: Transmissive TFT-LCD, bonded. White LED backlight Dsiplay Resolution: 320 x 240 pixels Illumination: White for day mode. Red, green, blue or white for night mode Environmental Protection, Waterproof: IPx7 Environmental Protection, Humidity: up to 95% RH Compass Safe Distance: 300mm (1.0") Temperature Operating: -15 to +55°C (5°F to +131°F) Temperature Storage: -30 to +70°C (-22 to +158°F)

Triton² Pilot Controller & Triton² Digital Display Pack Triton² Display The full-color Triton² Display provides sailors with a clear visual representation of key instrument data including Speed, Depth, Wind, Heading, AIS targets, GPS data and more. An Optically Bonded display means absolutely zero condensation or fogging, while transflective LCD technology provides exceptional contrast and visibility - day or night - while consuming less power than traditional backlight-only displays. The flexible, NMEA 2000® certified, Triton² Display can be integrated into a wider navigation system and also be combined with a Triton² Pilot keypad and NAC autopilot computer to create a complete autopilot control system, featuring B&G sail-specific autopilot steering algorithms. Key Features Optical Bonding Sporting an Optically Bonded 4.1" LCD display, Triton² allows you to see clearly in all conditions with its large clear color display 100% free from condensation or fogging Efficient LCD Technology: Transflective LCD technology uses reflected ambient light to enhance day-time visibility, providing the clearest sailing dedicated display available. LED backlighting provides highly adjustable illumination when required, making Triton² exceptionally efficient and extending time available from your battery capacity Easy to Use: Triton² provides simple on-screen menus controlled by soft-touch and reliable waterproof buttons Intuitive design makes it easy to configure and use your display Low Profile Design: At just 8mm thin the Triton² instrument adds a sleek look to any boat. Nearly half the dimension of its thick competitors, Triton² won't get in the way, catch ropes or offend the eye! NMEA 2000® Certified: NMEA 2000 certification means you can be confident when adding Triton² to an existing NMEA 2000 system. NMEA 2000 certification also opens up a wide variety of future expansion options for your Triton² system Easy Installation: A straight-forward front mounting method and a clip-on bezel over the (4) mounting screws combine with a single NMEA 2000 connection carrying both power and networked data The Triton² is simple and quick to install Autopilot Integration: Triton² will display B&G Pilot data on a clear status screen With the addition of a Triton² Pilot keypad the instrument becomes a fully functional Pilot controller Pilot Controller This intuitive keypad can be combined with the Triton² Instrument display to create a fully-featured autopilot controller. Benefit from B&G's intelligent sail-specific functionality for compass and wind steering, Smart Manoeuvre controls for easy tacking and gybing, and MFD / chart plotter integration for waypoint and route navigation. Take complete control of your autopilot with a simple seven-button keypad, built for safe and reliable operation in all conditions.

Ulterra 80/MSI/IP Trolling Motor w/i-Pilot Link & Bluetooth - 24v-80LB - 60" Only Ulterra™ features Auto Stow/Deploy and Power Trim, as well as your choice of i-Pilot® or i-Pilot Link™, and a multi-function foot pedal. You can stow, deploy and trim Ulterra from the remote or the foot pedal, meaning you never have to touch your motor again — unless you want to high-five it. Now with Built-In MEGA Side and Down Imaging™ Sonar.  Auto Stow & Deploy: Stow or deploy Ulterra just by pushing a button on your i-Pilot or i-Pilot Link remote, foot pedal or Humminbird fish finder. Power Trim: Trim Ulterra up or down at the push of a button — on either the foot pedal, the i-Pilot or i-Pilot Link remote or a Humminbird fish finder. Adjust to changing fishing conditions without reaching down to your trolling motor. i-Pilot® Link™ Integrated GPS Trolling System: i-Pilot® Link™ gives you unprecedented control over your boat by linking your trolling motor to your Humminbird® fish finder. Control your trolling motor from Link's color touch-screen remote or the Humminbird. You can set Spot-Locks, record paths, follow depth contours, automatically navigate to your favorite spots, control speed and steering, and more. Spot-Lock with Jog: Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on i-Pilot GPS system that is pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the i-Pilot remote or Humminbird fish finder. AutoPilot™: Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot™, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves and current. Built-In MEGA Side and Down Imaging®:  With a transducer built right into the trolling motor, you get crystal clear Humminbird® MEGA Side Imaging and MEGA Down Imaging with a clean look and protected housing. Heel-Toe Electric Foot Pedal: Stow, deploy and adjust the trim on Ulterra — all from the foot pedal. You can even activate Spot-Lock with one tap. Includes 18' cord. Integrated Battery Meter: The i-Pilot remote can tell you the exact charge left in your trolling batteries, so you know how much time you have left on the water. Digital Maximizer™: Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing. Weedless Wedge™ 2 Prop: With swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge™ 2 is one of the most trusted props in fishing. Indestructible Composite Shaft — Guaranteed for Life: At the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and we guarantee it for life. Mobile App Compatibility: Control i-Pilot directly from your Apple® or Android™ device with our mobile app. You get quick command of speed, steering, Spot-Lock and Advanced AutoPilot — plus the ability to update i-Pilot software. What's included: Ulterra 80 lb. 60" motor with Built-In MEGA Side and Down Imaging i-Pilot Link Remote Remote Charging Cable USB DC Adapter Lanyard, Heading Sensor 30' Ethernet Extension Cable Corded Foot Pedal MKP-33 Prop Mounting Hardware.

B&G H5000 Pilot Controller Enjoy straightforward autopilot access, control and system setup of B&G's powerful H5000 Pilot from the dedicated keypad of this Pilot Controller unit. As the primary Pilot controller, or as a second station to a Zeus chartplotter, the Pilot Controller provides assured control and feedback via a high-resolution monochrome display. Waterproof to IPx7, this dedicated Controller lets you remotely manage everything to do with the Pilot - from commission to control. It features the same mechanical designs as the H5000 displays, for rugged durability and consistent aesthetics. Dedicated Pilot control: Developed to complement the H5000 Pilot Computer, this Controller manages every function of this powerful and trusted tool - from commissioning to control Glass-bonded monochrome display: The bonded glass LCD display is tough, waterproof and condensation-resistant in the most testing environments with high-resolution monochrome screen, with wide viewing angle, for optimum readability and clear presentation of Pilot data in all light conditions. Straightforward interface: The controller's dedicated keypad and intuitive operation makes commissioning and control of the Pilot straightforward, flexible and convenient.

Suncover for Triton2 Pilot & OP12 Pilot Controller Protect your Triton² Pilot/OP12 controller with this sun cover

p70s Autopilot Control Heads The p70s is a push-button operation controller designed primarily for sailboats. Superior Viewing Advanced LED backlighting offers low power consumption and delivers vibrant color and contrast. Wide horizontal and vertical viewing angles ensure the display can be seen clearly from acute positions. Features: LightHouse user interface is simple and quick to use. Wide 160 viewing angles Start up wizard helps you configure the pilot quickly and easily Anti-reflective coating for improved visibility in bright sunlight Low power - typically 132mA/1.6W - 27% less than ST70 at x4 measured brightness Supported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog Steer Simple system and group dimming/illumination Support for multiple data sources SeaTalkng/NMEA2000 and SeaTalk1 connectivity (no bridging required)

p70Rs Autopilot Control Head with Rotary Knob Raymarine's p70Rs Autopilot Controller keeps you in command of your SmartPilot autopilot system no matter whether you are cruising, fishing or sailing! Built on Raymarine's ultra-sleek platform, the p70Rs autopilot controller offer boaters an attractive, high-visibility, and simple to operate interface to their Raymarine SmartPilot X-Series and Evolution autopilot systems. The p70Rs offers a convenient rotary control knob and support for multiple autopilot modes including Auto, standby, trolling patterns, and track mode from your GPS or chartplotter. Exclusive to the p70Rs is a convenient Power Steer mode, which enables you to use the p70R's rotary knob like a miniature steering wheel. P70Rs brings convenient, compact steering control to wherever you need it like auxiliary steering stations, flybridges, wing control stations and more. P70Rs features standard SeaTalkng connectivity for simple interfacing with Raymarine SmartPilot X-Series and Evolution autopilot corepacks. The p70Rs features a 3.5" sunlight viewable Liquid Crystal Display. LED backlighting delivers superior visibility day or night and ultra-low power consumption. Like the i70s instrument, the p70Rs feature a clean, modern glass-bridge styling that coordinates with eS and gS-Series multifuction diplays. They also feature all-weather optically bonded displays that deliver brighter colors and sharper contrast. Features: LightHouse user interface is simple and quick to use. Wide 160 viewing angles Start up wizard helps you configure the pilot quickly and easily Anti-reflective coating for improved visibility in bright sunlight Low power - typically 132mA/1.6W - 27% less than ST70 at x4 measured brightness Supported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog Steer Simple system and group dimming/illumination. Support for multiple data sources SeaTalkng/NMEA2000 and SeaTalk1 connectivity (no bridging required) Each p70s and p70Rs include both black and gunmetal bezels as well as a fitted soft silicone rubber sun cover, 400mm Seatalkng spur cable, panel gasket, mounting kit and document pack.

V-CAN Wireless Remote Controller for V-CAN Thrusters & BOW PRO This system gives boaters full control of their electrically driven equipment on board. It includes a base unit, one remote control, and two connection cables. The VETUS wireless control handheld remote has a range of 10 to 25 m, depending on the location of the receiver, and delivers easy control of V-CAN Thrusters and BOW PRO models. The wireless remote control meets the EMC requirements. Features: For V-CAN Thrusters and BOW PRO models Connectors for two thrusters (4 channels) Open-air range is up to 10m Maximum range is up to 25m when unimpeded Specifications: Remote Control  Power supply 3 VDC CR2032 (1x)  Protection Class: IP66  Frequency: 433.92 Hz  Temperature Range: 0°C - 70°C (+32°F - 158°F)  Weight: 50 g (2 oz) Receiver  Power Supply: 8 VDC to 30 VDC  Maximum Current (per output): 8 A (at 30 Volts DC)  Protection Class: IP40  Frequency: 433.92 Hz  Temperature Range: 0°C - 70°C (+32°F - 158°F)  Weight: 800 g (28 oz) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

AP70 Mk2 Autopilot - Control Head Only The AP70 Mk2 is a dedicated autopilot controller designed to meet the needs of professional mariners aboard a variety of commercial vessels. Replacing both the AP70 and AP80 as our IMO/SOLAS autopilot controller, the AP70 Mk2 retains much of the well-reputed platform of its predecessors, but with a brilliant new display and modernised software interface. Engineered for responsiveness, robustness and ease of use, the AP70Mk2 pairs a precision rotary control dial with dedicated buttons for instant access to steering modes, several custom-configurable work modes and multiple rudder/thruster integration. Wheelmarked for use on SOLAS vessels The AP70 Mk2 builds on, and continues the legacy of the SIMRAD Pro autopilot product portfolio. Its performance, robustness and quality are proven and recognised with the wheelmark symbol, making it suitable for all vessels ranging from small work- boats to large tankers. Advanced configuration and tuning options to suit all ships Parameters ranges and tuning options to support vessel dynamics. Adjustable for all weather conditions, hull types, work situations. Suitable for retro-fit on old ships as well as modern new-builds. Compatible with all common rudder/drive types Water jet, Azi-pods, Voith-Schneider, Rudder, outboard. Control signals to control, hydraulic pumps, solenoids, analog current/voltage, control/handshake signals. Up to 6 rudders/thrusters integration Dual rudders, fore and aft thrusters supports large and complex installations and redundancy. Heavy-duty rudder feedback support Simrad heavy-duty rudder feedbacks are supported. Configurable Work Mode and Low/High Speed Modes Autopilot settings can be tuned for optimal performance in separate low-speed, high-speed, and Work modes. The user-configurable Work mode allows the autopilot system to be configured for optimal response in a specific situation, such as a fully laden vessel, configurable thruster usage. No Drift Steering No Drift mode integrates GPS navigation with auto-steering, using position data to counteract the effects of wind and tide. This allows the AP70 Mk2 to maintain a straight track over ground on the current course, without the need to manually set a waypoint or route. Navigation steering, route following Navigation steering controls the ship on a pre-planned route from a Simrad MFD, Simrad ECDIS or third party MFD and ECDIS. Command transfer and multiple control stations support Command transfer is a mechanism useful in multi-controller installations. It enables the officer on watch to allow, deny the transfer of autopilot control to control devices such as a secondary AP70 Mk2 or a remote controller on a bridge wing station, above deck, or aft bridge depending on the work scenario. The AP70 Mk2 can also be used in an open configuration, where control flow is unrestricted. Features: Wheelmarked for use on board SOLAS vessels (IMO, MED-B) Advanced configuration and tuning options to suit all ships Compatible with all common rudder/drive types Up to 6 rudders/thrusters integration Heavy-duty rudder feedback support Configurable work modes and low/high speed modes No Drift steering holds course against wind and tide Navigation steering, route following Command transfer and multiple control stations support

OP12 Autopilot Controller The OP12 wired remote seamlessly integrates with Simrad autopilot systems to provide intuitive mode control, course adjustments, and power steering. Designed to complement the low-profile design of Simrad glass bridge instruments and displays, this remote can be combined with the IS42 Colour Instrument Display to create a standalone autopilot controller, or used as a dedicated autopilot keypad for GO, NSS and NSO evo2 multifunction displays. Features: Intuitive operation Easy installation Combine with an IS42 display for full autopilot control Compatible with Simrad AC12, AC42, NAC-2 and NAC-3 autopilot computers Use alongside NSS & NSO evo2 MFD's as an additional Autopilot Controller Low-profile glass helm design Low power consumption Certified NMEA 2000® connectivity Specifications: Dimensions: 60 x 115 x 32mm (2.4" x 4.5" x 1.3") Weight: 0.12kg (0.3lbs) Power Consumption: 1.4 Watts Network Load: 3 LEN Color: Black Environmental Protection, Waterproof: Waterproof rating: IPx7 Environmental Protection, Humidity: Up to 95% RH Compass Safe Distance: 300mm (1.0") Temperature Operating: -15 to +55°C (5°F to +131°F) Temperature Storage: -30 to +70 °C (-22 to +158 °F)

Triton² Autopilot Controller This intuitive keypad can be combined with a B&G Triton² Display to create a fully-featured autopilot controller, including B&G's Intelligent Sail Steering functionality and Smart Manoeuvre controls. Overview This intuitive keypad can be combined with the Triton² Instrument display to create a fully-featured autopilot controller. Benefit from B&G's intelligent sail-specific functionality for compass and wind steering, Smart Manoeuvre controls for easy tacking and gybing, and MFD / chart plotter integration for waypoint and route navigation. Take complete control of your autopilot with a simple seven-button keypad, built for safe and reliable operation in all conditions. Specifications: Dimensions: 60 x 115 x 32mm (2.4" x 4.5" x 1.3") Weight: 0.12kg (0.3lbs) Power Consumption: 1.4 Watts Network Load: 3 LEN Color: Black Environmental Protection, Waterproof: Waterproof rating: IPx7 Environmental Protection, Humidity: Up to 95% RH Compass Safe Distance: 300mm (1.0") Temperature Operating: -15 to +55°C (5°F to +13°F) Temperature Storage: -30 to +70°C (-22 to +158°F)