|
StructureScan 3D® Stainless Steel Thru-Hull Transducer - Pair
The Dual thru-hull StuctureScan 3D® Stainless Steel transducer for the StructureScan 3D® Sonar Imaging product line, providing more range and greater resolution.
These transducers are designed for boats with steep or variable deadrise hull angles, for seamless display of SideScan and DownScan and 3D Imaging.
As with transom-mount StructureScan 3D® transducer, the Dual thru-hull Stainless Steel version deliver extreme target detail, bottom discrimination, plus bait and game fish separation at depths to 300'(92M) and a wider range of 600'(183M) Left & Right of coverage.
These Dual thru-hull Stainless Steel StructureScan 3D® transducers from Airmar® are available only from Navico exclusively for StructureScan 3D® systems. These sturdy, Dual thru-hull Stainless Steel StructureScan 3D® transducers are resistant to the electrical forces in the environment where it will be used.
Each feature a low-profile design that minimizes drag; provide exclusive 3-channel beam, port and starboard SideScan, DownScan Imaging™ and 3D Imaging technology; an optional high-performance fairing is avaliable (000-13581-001) give you greater StructureScan performance at speed; and feature a 30'(9M) transducer cable.
**Note if you require a longer cable you will need 2 each 000-12752-001 transducer extension cable**
|
2329.33 |
|
|
StructureScan 3D® Stainless Steel Thru-Hull Transducer - Single
Lowrance and Simrad Yachting announce the release of new thru-hull StuctureScan 3D® Stainless Steel transducer for the StructureScan 3D® Sonar Imaging product line, providing more range and greater resolution.
As with transom-mount StructureScan 3D® transducers, the thru-hull Stainless Steel version deliver extreme target detail, bottom discrimination plus bait and game fish separation at depths to 300'(92M) and a wider range of 600'(183M) Left & Right coverage.
These Stainless Steel StructureScan 3D® transducers from Airmar® are available only from Navico exclusively for StructureScan 3D® systems. These sturdy, Stainless Steel StructureScan 3D® transducers are resistant to the electrical forces in the environment where it will be used.
Each feature a low-profile design that minimizes drag; provide exclusive 3-channel beam, port and starboard SideScan plus DownScan Imaging™ & 3D Imaging technology; an optional high-performance fairing is avaliable (000-13581-001) give you greater StructureScan performance at speeds; and feature a 30'(9M) transducer cable.
For boats with steep or variable deadrise hull angles, consumers must purchase the StructureScan® 3D Stainless Steel Thru-Hull Pair (000-13560-001).
|
1362.08 |
|
|
StructureScan™HD Sonar Stainless Steel Thru-Hull Transducer (Pair) w/Y-Cable
LSS-2 Though Hull Transducers
Thru-hull, Stainless Steel LSS-2 StructureScan® HD transducers, deliver extreme target detail, bottom discrimination and bait and game fish separation at depths to 300'/92M and a wider range of 600'/183M side-to-side coverage. All StructureScan® HD transducers are packed with an enhanced dual-frequency element array that operates at 455 kHz and 800 kHz.
These Stainless steel transducers from Airmar® are available only from Navico exclusively for StructureScan® HD and StructureScan® systems. These sturdy, Stainless steel transducers are resistant to the electrical forces in the environment where it will be used. Each feature a low-profile design that minimizes drag; provide exclusive 3-channel beam, port and starboard SideScan plus DownScan Imaging™ technology; includes a high-performance fairing that will give you Structure performance at speeds up to 35 mph; and feature a 30'/9M transducer cable.
|
1251.13 |
|
|
xSonic SS175L Stainless Steel Thru-Hull Transducer - 20°
The SS175L is a single-frequency LOW CHIRP Stainless Steel Thru-Hull Transducer offering exceptional detail and coverage in Deep Water.
Features:
Low CHIRP - 40-60 kHz with 32°- 21° beam for excellent fish targets
Reach Depth ranges of up to 2,500' with Low CHIRP
Fiberglass and wood hulls
10M Cable with 9-Pin XSONIC Connector
Compatible with Lowrance HDS Carbon and Simrad NSS Evo3 Displays
|
1458.80 |
|
|
Navico StructureScan™HD Sonar Stainless Steel Thru-Hull Transducer (Single)
LSS-2 Though Hull Transducers
Thru-hull, Stainless Steel LSS-2 StructureScan® HD transducers deliver extreme target detail, bottom discrimination and bait and game fish separation at depths to 300'/92M and a wider range of 600'/183M side-to-side coverage. All StructureScan® HD transducers are packed with an enhanced dual-frequency element array that operates at 455 kHz and 800 kHz.
These Stainless steel transducers from Airmar® are available only from Navico exclusively for StructureScan® HD and StructureScan® systems. These sturdy, bronze transducers are resistant to the electrical forces in the environment where it will be used. Each feature a low-profile design that minimizes drag; provide exclusive 3-channel beam, port and starboard SideScan plus DownScan Imaging™ technology; includes a high-performance fairing that will give you Structure performance at speeds up to 35 mph; and feature a 30'/9M transducer cable.
|
772.92 |
|
|
xSonic SS175H-W/12 Stainless Steel Thru-Hull Transducer - 12° - 9-Pin
The SS175H-W is a stainless steel, thru-hull CHIRP transducer, ideal for sportfishing and commercial vessels up to 8M (25') in size. This single-channel transducer offers High CHIRP combined with a wide beam for the best resolution and coverage in shallower depths.
Features:
130-210 kHz High CHIRP with wide 25° beam for excellent fish targets
Up to 310M (1000') range with High CHIRP
1 internal broadband ceramic
Thru-hull with stainless steel housing
Suitable for fiberglass and wood hulls
Ideal for sportfishing and commercial vessels up to 8M (25')
Recommended for use with Simrad NSSevo3 Lowrance HDS Gen3 multifunction displays
|
1458.80 |
|
|
SS175H-W/0 Stainless Steel Thru-Hull Transducer - 0° - 9-Pin
The SS175H-W is a stainless steel, thru-hull CHIRP transducer, ideal for sportfishing and commercial vessels up to 8M (25') in size. This single-channel transducer offers High CHIRP combined with a wide beam for the best resolution and coverage in shallower depths.
Features:
130-210 kHz High CHIRP with wide 25° beam for excellent fish targets
Up to 310M (1000') range with High CHIRP
1 internal broadband ceramic
Thru-hull with stainless steel housing
Suitable for fiberglass and wood hulls
Ideal for sportfishing and commercial vessels up to 8M (25')
Recommended for use with Simrad NSSevo3 Lowrance HDS Gen3 multifunction displays
|
1458.80 |
|
|
165T-SS54 Stainless Steel Thru-Hull Transducer for DFF3D Sounder
Stainless Thru-Hull Multi-Beam Transducer
The 165T-SS54 is a multi-beam transducer for the DFF3D that affords a 120 degree port-starboard view of the underwater world. A built-in motion sensor stabilizes the display to give clear and stable images.
Features:
Stainless Steel Thru Hull with high speed fairing block
Can be flush mounted in keel without using fairing block
DFF3D operating frequency: 165 kHz
2 x 10M Cables: Bare ended cable for DFF3D sonar and 7-pin connector for the motion sensor
Compact design
Built-in motion sensor
Built-in temp sensor
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2026.67 |
|
|
556TID-HDD SS260 Stainless Steel Thru-Hull Transducer w/Temp and Fairing Block - 10 Pin
The SS260 is our best performing, stainless-steel, thru-hull stem for 1 kW echosounders. Its construction utilizes separate 50 kHz and 200 kHz elements for unparalleled deep-water performance and unmatched bottom and water-column detail. The SS260’s narrow beam gives crisp image detail especially suited for fishing shelves, intricate bottom structures, and wrecks.
Standard Features
1,000 Watts Power
50/200 kHz with Diplexer
20/6 degree Beam Angles
Stainless Steel Thru-Hull with Temperature
10-Pin Connector
High Speed Fairing Block included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1333.33 |
|
|
xSonic SS175M Stainless Steel Thru-Hull Tilted Medium CHIRP Transducer - 20° Element - 9-Pin
Features:
Black 9-Pin Connector
Cable Length - 10M (33.0')
SS175M - 1-Internal Broadband Ceramic Assembly
Depth & fast-response water-temperature sensor
Stainless Steel transducer housing
Hull Type: Steel or aluminum
Boat Size: Up to 11M (36’)
Useable shaft length 71mm (2.80”)
Medium-Frequency (M)
Medium—Chirps from 85 kHz to 135 kHz, 24° to 16° beamwidth
50 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth
Medium-frequency benefits include the ability to sound deeper than the high-frequency, along with better target resolution than the low-frequency
|
1212.59 |
|
|
xSonic SS175M Stainless Steel Thru-Hull Tilted Medium CHIRP Transducer - 12° Element - 9-Pin
Features:
Black 9-Pin Connector
Cable Length - 10M (33.0')
SS175M - 1-Internal Broadband Ceramic Assembly
Depth & fast-response water-temperature sensor
Stainless Steel transducer housing
Hull Type: Steel or aluminum
Boat Size: Up to 11M (36’)
Useable shaft length 71mm (2.80”)
Medium-Frequency (M)
Medium—Chirps from 85 kHz to 135 kHz, 24° to 16° beamwidth
50 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth
Medium-frequency benefits include the ability to sound deeper than the high-frequency, along with better target resolution than the low-frequency
|
1212.59 |
|
|
556TID-LTD/12 Stainless Steel Thru-Hull 1kW - 12° Tilted
Furuno's Stainless Steel Thru-Hull Transducer, 1 kW (10 Pin), 12-degree Tilted Element.
Airmar SS164 Housing Style Transducer.
If a thru-hull flush-style, stainless steel transducer is called for, the 12-Degree Tilted Element 556TID-LTD/12 will accommodate a deadrise angle between 8° and 15°. This transducer compensates for deadrise by angling the element inside the housing.
The transducer is labeled with an arrow on top of the housing that should point towards the keel, whether it is installed to port or starboard. This ensures that the tilted element within the housing is given the correct orientation.
Features:
1kW 50/200 kHz
20/6 degree Beam Angles
Stainless Steel Thru Hull with Temperature
30 Foot Cable with 10-Pin Connector
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1066.67 |
|
|
SS60 Stainless Steel Thru-Hull 20° Tilt, 50/200, 10-Pin
Stainless Steel Thru-Hull Transducer with Temp, 600W (10-Pin), 20° Tilted Element. If a thru-hull flush-style transducer is called for, the Tilted Element SS60-SLTD/20 will accommodate a deadrise angle between 16° and 24°. This transducer compensates for deadrise by angling the element inside the housing. The transducer is labeled with an arrow on top of the housing that should point towards the keel, whether it is installed to port or starboard. This ensures that the tilted element within the housing is given the correct orientation.
Features:
600 Watts
50/200 kHz
45/12 degree Beam Angles
Stainless Steel Thru-Hull with Temperature
30' Cable with 10-Pin Connector
|
426.67 |
|
|
RVM-420 Stainless Steel Thru-Hull Pair, 20 Degree Deadrise & 10M Cable
The RVM-400 series transducers feature DownVision™, SideVision™, 600-Watt High CHIRP, and 3D sonar capability. The transducer has a built-in attitude and heading reference system (AHRS) that stabilizes 3D sonar imagery, automatically compensating for vessel motion. The RVM-400 series also has a built-in fast-response water temperature sensor for quick, accurate readings.
The RVM-420 is a port and starboard transducer pair designed for boats with 15° to 25° of deadrise. Each transducer element is tilted at 20° to compensate for the hull deadrise.
The RVM-420 transducer pairs feature titled offset sonar elements inside their surface mount housings. The tilted elements ensure the sonar's beam patterns are correctly aligned for maximum performance while eliminating the drag and turbulence associated with a fairing-blocked transducer installation. Bundled transducer pairs include a Y-Cable harness that internally joins the two transducers together and an 8-meter transducer extension cable.
*Works with Axiom 2 Pro RVM series, and RVM1600 Sounder Module
Features:
600-Watt traditional CHIRP
High-performance Down and SideVision ceramics
High-speed housing with isolation plate
10M Cable
RVM-420 port and starboard pair accommodates hulls with a deadrise between 15° and 25°
|
2399.99 |
|
|
RealVision 3D™ Bronze Thru-Hull Transducer Pair Pack - 12° - 8M Cable & Y-Cable
Designed for inboard or outboard boats, the RV-212 Bronze Through Hull Transducer System lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar.
The RV-212 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer system has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves, swells, and while maneuvering. The RV-212 system also has a built-in fast response water temperature sensor for quick, accurate readings.
Raymarine’s RV-212 Bronze Through Hull Transducer system pack contains a pair of RealVision 3D transducers with internal offset to accommodate hull deadrise angles from 1° to 12°. This completely eliminates the need for fairing blocks. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-212 system works great on trailered boats too.
The RV-212 system features rugged cast-bronze through hull bodies suitable for fiberglass or wooden hulls. One transducer transmits and receives to port and downwards, the other to starboard and downwards, ensuring a full 180° of underwater coverage even on boats with deep keels or other underwater protrusions. Each transducer features a 2M pigtail, joining y-cable and 8-meter extension cable, resulting in an overall cable length of 10M (33'.)
What’s in the Box?
RV-212P Bronze Port Transducer with 2M cable
RV-212S Bronze Starboard Transducer with 2M cable
RealVision 3D Transducer Y-Cable
RealVision 3D 8M (26') Transducer Extension Cable
Anti-rotation bolt kit
Installation instructions
|
2269.99 |
|