|
Wire Harness f/D2 Pair
This 14' wiring harness is designed to connect a pair of D2 LED lights to your 12V electrical system. It features battery terminals on one end and Deutsch connectors on the other to connect to the lights. It incorporates an inline fuse holder, a 12V relay, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: D2 (Pair).
Features:
18 AWG Wire
Deutsch Connector
Inline Fuse Holder
|
31.92 |
|
|
Wire Harness f/Dually Pair
This 14' wiring harness is designed to connect a pair of Dually LED lights to your 12V electrical system. It features battery terminals on one end and Deutsch connectors on the other to connect to the lights. It incorporates an inline fuse holder, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: Dually (Pair).
Features:
18 AWG Wire
Deutsch Connector
Inline Fuse Holder
|
32.09 |
|
|
Wire Harness f/4"-6" Light Bar
This 11' wiring harness is designed to connect a single LED light to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: Dually (Single), D2 (Single), 4" E-Series, 6" E-Series, 4" SR-Series, 6" SR-Series.
Features:
18 AWG Wire
Deutsch Connector
Inline Fuse Holder
|
32.09 |
|
|
Wire Harness f/10"-30" Light Bar
This 11' wiring harness is designed to connect a single 10"-30" LED light bar to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, a 12V relay, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: 10" E-Series, 10" SR-Series, 20" E-Series, 20" SR-Series, 30" E-Series, 30" SR-Series, 40" E-Series, 40" SR-Series.
Features:
16 AWG Wire
Deutsch Connector
Inline Fuse Holder
12 Volt Relay
|
40.12 |
|
|
Wire Harness - High Power f/40" - 50" Light Bar
This 13' wiring harness is designed to connect a single 40"-50" LED light bar to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, a 12V relay, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: 50" E-Series, 50" SR-Series.
Features:
14 AWG Wire
Deutsch Connector
Inline Fuse Holder
|
45.37 |
|
|
Lighted Rocker Switch
This Switch features a lighted rocker with protective rubber boot and is a great addition to any RIGID Industries lighting system. This switch will fit all RIGID Industries wiring harnesses. This product requires a 3/4" hole to mount.
Features:
Lighted for Better Visibility
Water Resistant
Protective Rubber Boot
Works with All RIGID Industries Wiring Harnesses
|
12.74 |
|
|
24 Volt Relay
Standard relays included with Rigid Industries wire harnesses are 12V. If your project has a 24V electrical system, you will need to replace the 12V relay with this 24V relay for proper functionality.
|
33.74 |
|
|
Ignite Surface Mount Diffused - Pair - Black
Most vehicles have very inadequate backup lighting, which can be a major safety problem. RIGID makes it easy to add compact and powerful backup lighting to any vehicle with the RIGID Ignite™ Backup Kit. The Ignite Series Accessory Lights are small but pack a lot of power with 1000 raw lumens in a light that measures just 1.4” x 1.4” x 2”. The Backup Light Kits are available with a pair of either flush mount or surface mount Ignite lights along with mounting brackets and related hardware. While a wiring harness is not included, the powerful LEDs in each light consume less than one amp each, so powering them is often as easy as tapping into the vehicle’s existing backup lighting circuit.
Features:
Available in Black Only
RIGID’s Smallest Forward Projecting Light
Small Package, Big Output
Low Minimum Voltage: 6-28 VDC
IP68 Compliant
Available only in Diffused
RIGID Quality & Performance
Easy Install
Specifications:
Watts: 12
LED's: 1
Raw Lumens: 1000
Lux @ 10m: 9
Beam Distance: 59.5M
Peak Beam Intensity: 884.5 cd
|
128.39 |
|
|
Adjustable Bar Mount Kit - Pair
The RIGID Industries Adjustable Bar Mount Kit includes two (2) adjustable mounts; one for each end of one of our light bars. These mounts are extremely versatile, allowing for up to 1" of adjustment to position your light exactly where you need it. Made in the USA from light weight black anodized billet aluminum.
Features:
Billet Aluminum Construction
Universal Bar Mount
|
84.74 |
|
|
Adjustable Bar Mount Kit - Pair
The RIGID Industries Adjustable Bar Mount Kit includes two (2) adjustable mounts; one for each end of one of our light bars. These mounts are extremely versatile, allowing for up to 1" of adjustment to position your light exactly where you need it. Made in the USA from light weight black anodized billet aluminum.
Features:
Billet Aluminum Construction
Universal Bar Mount
|
84.74 |
|
|
Adjustable Bar Mount Kit - Pair
The RIGID Industries Adjustable Bar Mount Kit includes two (2) adjustable mounts; one for each end of one of our light bars. These mounts are extremely versatile, allowing for up to 1" of adjustment to position your light exactly where you need it. Made in the USA from light weight black anodized billet aluminum.
Features:
Billet Aluminum Construction
Universal Bar Mount
|
84.74 |
|
|
Adjustable Bar Mount Kit - Pair
The RIGID Industries Adjustable Bar Mount Kit includes two (2) adjustable mounts; one for each end of one of our light bars. These mounts are extremely versatile, allowing for up to 1" of adjustment to position your light exactly where you need it. Made in the USA from light weight black anodized billet aluminum.
Features:
Billet Aluminum Construction
Universal Bar Mount
|
84.74 |
|
|
Wire Harness - Zone 3 & 4 (E Port-RCA)
Compatible with MS-RA770 stereos
Fusion's Zone 3 & 4 Harness Wire for installation.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
13.03 |
|
|
Wire Harness for MS-RA70 Stereo
Features:
Power/Speaker Wire Harness
Specifically for MS-RA70/RA-70NSX Stereo
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
8.52 |
|
|
Wire Harness - Zone 1 & 2 (B Port-RCA)
Use this wiring loom to connect your compatible Fusion® marine stereo to a Fusion marine amplifier, enabling the Zone 1 and 2 speaker or subwoofer zones. There are also RCA inputs for enabling the AUX 1 source.
Compatible with
MS-RA670
MS-RA770
MS-WB670
MS-WB675
MS-BB100
MS-RA210
MS-RA70
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
13.03 |
|