|
Primer-207 - Pigmented, Solvent-Based Primer for Various Substrates
Sika® Primer-207 is a solvent-based black primer that reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives.
Sika® Primer-207 is specifically formulated for the treatment of bond faces prior to the application of Sika’s 1-component polyurethanes. This primer might provide excellent adhesion without a previous activation step on many substrates. Sika® Primer-207 fluoresces under long-wave UV light for a limited period of time. This feature is used for in-process control.
Usage:
Sika® Primer-207 is used to improve adhesion on a very broad range of different substrates, such as float glass, ceramic-coated glass, plastics, pre-coatings, painted surfaces, E-coats, and metals.
Seek the manufacturer’s advice and perform tests on original substrates before using Sika® Primer-207 on materials prone to stress cracking.
This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
Application:
Shake the Sika® Primer-207 can very thoroughly until the mixing balls rattle freely. Continue shaking for another minute and apply a thin but covering coat with a brush, felt, or foam applicator.
Ideal application and surface temperatures are between 15 °C and 25 °C.
Sika® Primer-207 has to be applied only once. Care must be taken to ensure that this single application gives adequately dense coverage. Consumption and method of application depend on the specific nature of the substrates. Tightly reseal the container immediately after each use.
Features:
Enhanced adhesion on a wide variety of substrates
Visible under UV light
Easy to use
|
68.24 |
|
|
Primer-206 G+P Black 250ml Bottle
Pigmented, solvent-based primer for various substrates. Sika® Primer-206 G+P is a solvent-based black primer, which reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives. Sika® Primer-206 G+P is specifically formulated for the treatment of bond faces prior to the application of Sika’s 1-component Polyurethanes.
Features:
Enhanced adhesion on a wide variety of substrates
Easy to apply
Usage:
Sika® Primer-206 G+P is used to improve adhesion on substrates such as float glass, ceramic-coated glass, pre-coatings, painted surfaces, and some plastics and metals.
Seek manufacturer’s advice and perform tests on original substrates before using Sika® Primer-206 G+P on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
|
68.24 |
|
|
Primer-206 G+P Black 1L Bottle
Pigmented, solvent-based primer for various substrates. Sika® Primer-206 G+P is a solvent-based black primer, which reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives. Sika® Primer-206 G+P is specifically formulated for the treatment of bond faces prior to the application of Sika’s 1-component Polyurethanes.
Features:
Enhanced adhesion on a wide variety of substrates
Easy to apply
Usage:
Sika® Primer-206 G+P is used to improve adhesion on substrates such as float glass, ceramic-coated glass, pre-coatings, painted surfaces, and some plastics and metals.
Seek manufacturer’s advice and perform tests on original substrates before using Sika® Primer-206 G+P on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
|
140.39 |
|
|
Primer-209 D Black 250ml Bottle
Pigmented, solvent-based primer for paints and plastics. Sika® Primer-209 D is a solvent-based black primer, which reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives. Sika® Primer-209 D is specifically formulated for the treatment of bond faces prior to the application of Sika’s 1-component Polyurethanes. This primer might provide excellent adhesion without previous activation steps on certain plastic substrates.
Areas of Application:
Sika® Primer-209 D is used to improve adhesion on many plastics and paints such as GRP, epoxy resins, PVC, ABS, PMMA, PC, PS and acrylics, alkyds/melamine, powder coatings, and baking varnishes.
Due to the wide variety of plastics, it is mandatory to perform preliminary tests on original substrates under production conditions.
Seek manufacturer’s advice and perform tests on original substrates before using Sika® Primer-209 D on materials prone to stress cracking.
This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
|
65.99 |
|
|
Primer-209 D Black 1L Bottle
Pigmented, solvent-based primer for paints and plastics. Sika® Primer-209 D is a solvent-based black primer, which reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives. Sika® Primer-209 D is specifically formulated for the treatment of bond faces prior to the application of Sika’s 1-component Polyurethanes. This primer might provide excellent adhesion without previous activation steps on certain plastic substrates.
Areas of Application:
Sika® Primer-209 D is used to improve adhesion on many plastics and paints such as GRP, epoxy resins, PVC, ABS, PMMA, PC, PS and acrylics, alkyds/melamine, powder coatings, and baking varnishes.
Due to the wide variety of plastics, it is mandatory to perform preliminary tests on original substrates under production conditions.
Seek manufacturer’s advice and perform tests on original substrates before using Sika® Primer-209 D on materials prone to stress cracking.
This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
|
267.23 |
|
|
Oval 2-Pin Base f/Angled Pole - Black
Part #: 91022-7
These 2-pin bases for angled pole lights with locking collars are well-suited for rough conditions or long poles. Features a soft rubber cover with a molded-in gasket to protect the socket from moisture and debris when pole light is stowed away. Provides a 2-pin socket and a 7.5 degree angle and installs on narrow gunwales or deck areas. Completely non-corrosive, they feature contacts which are nickel-plated to resist corrosion and multi-crimped for durability, and wire leads tinned for corrosion resistance.
Features:
Oval
2-Pin
Base specifically for angled pole
Black
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
13.01 |
|
|
Replacement Strainer Base
Replacement Strainer Base f/Round Rule Pumps w/Flow Rate 1500-2000gph
WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
10.54 |
|
|
Replacement Strainer Base
Replacement Strainer Base f/Round Rule Pumps w/Flow Rate 2800-3700gph
WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
9.91 |
|
|
Replacement Strainer Base
Replacement Strainer Base f/Rule Mate Bilge Pumps
Fits Pre-2009 Rule Mate Models RM500, RM750 & RM1100
WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
8.71 |
|
|
Replacement Strainer Base
Replacement Strainer Base f/Rule Mate Bilge Pumps w/FLow Rate 1500-2000gph
WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
15.10 |
|
|
Perko Rectangular Plug-In Base f/Pole Cards - Chrome Plated Zinc/Black
Features:
Plain black cap, chrome plated zinc alloy
Black polymer base
Pigtail leads
Fits 1343, 1348, 1400, 1451 and 1470 Series All-Round Pole Lights
Specs:
Number of Pins: 2
Base Dimensions: 3-3/4" x 1-5/8"
Tube Angle: 16°
Screw Size: 8
|
31.97 |
|
|
No-Drill™ Laptop Base f/ '97-16 Ford F-250, F-350, F-450, F-550, F-650, F-750 & Excursion
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the front bench or passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Compatible Vehicles:
F-250 (1997-2016)
F-350 (1997-2016)
F-450 (1997-2016)
F-550 (1997-2016)
F-650 (1997-2018)
F-750 (1997-2018)
Excursion (2000-2005)
Placement of Mount:
Passenger side floor board, in front of seat
DRILLING REQUIREMENTS:
No - attaches to seat studs
Seat Configuration:
Bucket
Pole:
Purchased Separately
Material:
Powder Coated Steel
|
86.82 |
|
|
No-Drill™ Laptop Base f/ The Dodge RAM 1500-5500 - 2008-2015
Specifications/Features
Compatible Vehicles:
Dodge RAM 1500-5500 (2008-2015)
Placement of Mount:
Passenger side, front, where seat rail frame attaches to floor board.
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Pole:
Purchased Separately
Weight:
2.1 lbs.
Material:
Powder Coated Steel
Features:
Quick installation with no drilling needed. Rock solid construction with lifetime warranty. Low profile keeps mount away from passenger leg space. Won't interfere with levers or factory-installed console or 4WD lever. Designed to accommodate trucks with PTO
|
97.58 |
|
|
1" Ball Marine Electronic Base f/Humminbird & Lowrance
The RAM-B-107BU is a marine grade aluminum base with 1" rubber ball. The base connects to the underside of Humminbird and Raymarine marine GPS devices.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag. The RAM-B-107BU is a "light use" base, designed to hold small marine electronic devices.
Weight:
0.35 lbs.
Compatible Devices:
Humminbird 700 Series
Humminbird 500 Series
Humminbird 300 Series
Humminbird 100 Series
Humminbird Matrix Series (excluding Matrix 97)
Lowrance Elite-5
Lowrance Elite-5M
Lowrance Elite-5X
|
18.47 |
|
|
No-Drill™ Laptop Base f/'17-20 Ford F-Series + More
The RAM No-Drill™ laptop mounting base for the 2015 Ford F-150 features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the front bench or passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Features:
Placement of Mount: Passenger side, in front, where seat frame meets floor board
Drilling Requirements: None. Utilizes existing vehicle mounting points and hardware
Seat Configuration: Bucket
Pole: Purchased Separately
Material: Powder Coated Steel
Custom, No-Drill™ mounting base offers lowest profile in the industry
Manufactured from high strength steel with a durable powder coat finish
If required, high quality fastening hardware is included
Mounts using existing seat bolts, no drilling required
Compatible Vehicles:
Dodge
Journey (2011-2018)
Ford
F-150 (2015-2020)
F-250-F-550 (2017-2020)
Escape (2013-2019)
Expedition (2018-2019)
Transit Connect (2014-2020)
C-Max (2014-2018)
Focus (2011-2018)
Raptor (2015-2020)
Jeep
Compass (2013-2018)
Patriot (2013-2017)
|
45.01 |
|