Cove Wireless RGB LED Charger - 3 Coil - 10W - 12/24V ROKK Wireless – Cove LED 10W safely holds and wirelessly charges a phone at the same time. Scanstrut's new waterproof RGB LED lights allow users to link in with any RGB control system. Now users can keep their phone in a safe place on board, have insight, be charged, and be ready to go! Features: Cove LED 10W safely houses and wirelessly charges a phone at the same time The IPX5 waterproof 12/24V Qi-certified waterproof wireless charging range enables wireless charging for the outdoor environment without the need for phone charging cables. Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use onboard The unique 10W technology is housed in an IPX5, fully encapsulated and sealed unit The most convenient way to store and wirelessly charge a phone onboard, indoors or out!  Clever design that reduces the installation depth by storing and wirelessly charging the phone sideways (perfect for integration into consoles, bulkheads, seating, cabinetry, and more) The internal grippy mat stops a phone from sliding around, and its rubberized front lip with an easy-access thumb bevel acts as a safety barrier, ensuring the phone always stays safe Cove’s front panel features passive air vents, encouraging cool air into the pocket, and rubber cooling channels, keeping a phone cooler for longer Cove LED 10W features Scanstrut waterproof RGB LED lights, allowing users to link in with any RGB control system to seamlessly match the lighting around the boat Scanstrut's Cove LED 10W lighting is fully dimmable as well, so users can alter light levels to suit their mood Beautiful Design Rounded corners and tapered front design eliminate all snagging risks, making it possible to install in high-traffic areas of the boat where phone charging/storage until now has been impossible. Simple Install One easy cut into a chosen mounting location, four screws supplied for fixing, and a front fascia to leave the finished result clean and uncluttered – you're now ready to store. Charge. Connect! Wash Down Worried about getting water inside? No problem! Cove automatically drains either out of the front or through the self-drill drains out of the rear of the housing, with the option to use a push-fit drain tube to route water away.  Dual Functionally  Featuring intelligent Foreign Object Detection, Cove 10W is perfect for storing other personal items, such as wallets and keys, as the charger will only begin to charge when a phone is placed in the pocket– nothing else!

  It's time to get Active…..Dock, Charge, Connect.  Working directly with a 12/24V power supply, Scanstrut ROKK Wireless Active securely holds and wirelessly charges your phone even in the toughest conditions. Mount your phone exactly where you need it – inside or out.  One-handed operation for easy docking. Charging is instant, no connection needed. Self-aligning, high-grip jaws fit a wide range of phone sizes and securely hold your device.  Fully sealed, IPX6 waterproofing means you can now wirelessly charge your phone anywhere outdoors, anywhere on-board.  Stock is expected to be available the end of April. Pre-orders are encouraged due to high demand.          Specials    Closeouts   Remanufactured    Rebates  

  It's time to get Active…..Dock, Charge, Connect.  Working directly with a 12/24V power supply, Scanstrut ROKK Wireless Active securely holds and wirelessly charges your phone even in the toughest conditions. Mount your phone exactly where you need it – inside or out.  One-handed operation for easy docking. Charging is instant, no connection needed. Self-aligning, high-grip jaws fit a wide range of phone sizes and securely hold your device.  Fully sealed, IPX6 waterproofing means you can now wirelessly charge your phone anywhere outdoors, anywhere on-board.   Pre-orders are encouraged due to high demand.          Specials    Closeouts   Remanufactured    Rebates  

Aura Magnetic Wireless Charger - 10W - 12/24V Introducing Scanstrut's Aura 10W. Designed to withstand the toughest conditions, this device not only wirelessly charges your phone but also securely holds it in place. Thanks to our Mag technology, an Apple iPhone will effortlessly magnetically lock into an optimal charging location. Plus, the front spring-loaded locking grip ensures the phone remains in place even during rough rides, keeping it fully always charged and within reach. Installation Designed to be installed below marine foam products, leaving a clean, integrated finish. Power Scanstrut's upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps. Subjected to our harshest environmental, vibration, impact, and on-water testing programs. This is combined with Scanstrut's world-renowned expertise in waterproofing technologies, UV stabilization techniques, and premium-grade materials to ensure Aura is the best and only choice to make when it comes to mounting and wirelessly charging your phone outdoors.

ROKK 10W Edge Wireless Phone Charging Mount The IPX6 waterproof 12/24V Qi certified waterproof wireless charging range enables wireless charging for the outdoor environment without needing phone charging cables.  Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use on board, with the unique technology housed in an IPX6, fully encapsulated and sealed unit. Right up to the Edge - with the smallest footprint, Edge now means you have even more choice of how and where you install your phone mount and charger combo.  Crowded consoles, side-mounting, and flat and vertical surfaces are all suitable. Put your phone on its Edge - Rotate it from portrait to landscape to view your favorite navigation app or simply fine-tune the position for the optimum viewing angle. 12/24V and IPX6 waterproof, ROKK Wireless – Edge is perfect for boat consoles tight on space or any vehicle working outside in the elements, with the simple one-handed operation you can easily dock and instantly start charging your phone.  No cable is required. The self-aligning, high-grip jaws accommodate all wireless charging phones and securely hold your device in the optimum charging position every time.  Couple this with the innovative adjustable body of Edge and you’ll have your phone fully charged, right where you need it. Install Edge 10W on any surface: a secure 3-point fixing system and a footprint of just 50mm (1.96”) diameter maximize your choice of location and a watertight cable pass-through completes the install. Our upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps. Our improvements don’t just stop there, now featuring easier phone alignment with a larger charging area, and electrical componentry that has been enhanced to significantly improve your phone's charge times, even in the harshest outdoor environments. With the same great look, ROKK Wireless is tried and tested in all corners of the globe in all weathers, and conditions. Featuring Qi-certified wireless technology and a “Smart” LED that indicates when your phone is charging.  Throw in foreign object detection and thermal cut-off and you’re guaranteed safe, reliable charging in all environments.  Charging is also possible through non-metallic, waterproof cases.  Case Compatibility: ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm) Features: Install Edge on any surface - a secure 3-point fixing system and a footprint of just 50mm (1.96”) diameter maximize your choice of location and a watertight cable pass-through completes the install. Compatible with all Qi Wirelessly charging electronics. Includes a “Smart” LED that indicates when your phone is charging.  Throw in foreign object detection and thermal cut-off and you’re guaranteed safe, reliable charging in all environments.  Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max - 2A   Output Power - 10W (9V,1A) IPX6 Waterproof Qi-certified wireless charging Protection - UV Resistant Dimensions (H x L) - 7.71" (196mm) x 3.7" (94mm) In the Box: Charger/Mount Instruction manual  *Sold as an Individual

ROKK 10W Nest Waterproof Wireless Phone Charging Pocket The IPX6 waterproof 12/24V Qi certified waterproof wireless charging range enables wireless charging for the outdoor environment, without the need for phone charging cables. Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use onboard. The unique technology is housed in an IPX6, fully encapsulated and sealed unit. The most convenient way to store and wirelessly charge your phone onboard indoors or out!  Nest safely houses & wirelessly charges your phone at the same time.  Now you can keep your phone in a safe place on board, tucked away, charged, and ready to go!  Perfect for integration into consoles, seating, cabinetry, and more!  Simply slide your phone into the pocket and instantly start wirelessly charging.  The super grippy mat stops your phone from sliding around inside.  The front lip with an easy-access thumb bevel acts as a safety barrier, ensuring your phone stays in the Nest! Our new upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps. Our improvements don’t just stop there, now featuring easier phone alignment with a larger charging area, and electrical componentry that has been enhanced to significantly improve your phone's charge times, even in the harshest outdoor environments. With the same great look, ROKK Wireless is tried and tested in all corners of the globe in all weathers, and conditions. Case Compatibility: ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm) Features: Compatible with all Qi Wirelessly charging electronics. Rounded corners and tapered front design eliminate all snagging risks, making it possible to install in high traffic areas of the boat where phone charging/storage until now has been impossible. One easy cut into your chosen mounting location,4 screws supplied for fixing, and a front fascia to leave the finished result clean and uncluttered –you're now ready to Store. Charge. Connect! Worried about getting water inside?  No problem!  Nest automatically drains either out of the front or through the self-drill drains out of the rear of the housing with the option to use a push-fit drain tube to route water away.  Dual functionality - featuring an intelligent Foreign Object Detection, Nest is perfect for storing your other personal items such as wallets and keys as the charger will only begin to charge when a phone is placed on the mat – nothing else! Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max: -2A   Output Power: 10W (9V,1.1A) IPX6 Waterproof Qi-certified wireless charging In the Box: Pocket w/bezel Wireless charger Mounting hardware Instruction manual *Sold as an Individual 

8033 Amber LED Indicator Light Features: Amber 12/24V DC 5 Milliamperes Easily installed in any Blue Sea Systems circuit breaker panel Simple push-in installation mounts in any thickness material Useful as general indicator and alarm lights WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Headhunter XRS-124 X-CAL 12/24V Pump X-Caliber – 12-24V DC Water Pressure Pump Quiet, reliable, blasting water pressure. Combining advanced DC motor and control technology with a proven self-priming centrifugal pump, the X-caliber surges past the competition with a flood of features. A built in microprocessor interfaced with a rugged ceramic temperature and pressure sensor provides variable speed operation, prevents dry running damage and ensures complete electrical protection.   Part#Description   XRS-124X-Caliber 12-24 VDC Saltwater Pressure System   Control Panel: Program power and pressure settings via the integrated control panel. Four colored LED’s display current settings and alarm conditions.   Advanced Features: Adjustable cut in pressure Adjustable power setting Operates on 12 or 24VDC Over voltage protection Under voltage protection Over current protection Anti-flooding protection Dry run protection Variable Speed Rotating bracket   Product Details/Specifications:   Liquid Temp 32°F (0°c)-104°F (40°c) Ambient Temp 32°F (0°c)-122°F (50°c) Max Pressure 67 PSI (4.5 bar) Max Flow 10 GPM (38 lpm) Suction/Discharge 3/4” FPT (Optional metric adapter) Weight 16lbs (7.2 kg) Dimensions 15”(382mm)L 8”(203mm)W 7”(178mm)H      

8665 Contura 3 Bilge Pump Control Panel Blue Sea Systems water resistant 12/24 Volt DC Bilge Pump control panel with Contura rocker switch and fuse holder for fuses up to 20amp  Features: Designed for 12 or 24V DC systems   ON - OFF - AUTO Contura Switch Watertight mounting gasket Fuse holders accept commonly available AGC and MDL glass fuses "ON” LED embedded in switch indicates the pump is running Completely wired and ready to install Specifications: Weatherproof - Water Resistant No. of Bilge Pumps - three (3) Nominal Voltage - 12/24V Panel Cumulative Rating - 45A Switch Rating: 20A @ 12V DC / 15A @ 24V DC Dimensions (H x W x D) - 3.75" x 5.25" x 3" In the Box: Panel Mount AGC/MDL Fuse Holder (P/N 5021) x three (3) Contura III Switch SPDT - On - OFF - (ON) (P/N 7944) x three (3) Black 60 Label Set (P/N 8214) *Sold as an Individual 

Aluminum-S-Cleats These Aluminum-S-Cleat come in sizes to fit all boats. Pick from 10", 12", 15", or 18" S cleats   Made from 356 Corrosion-Resistant cast Aluminum these S Cleats are built to withstand the harshest marine environments. No matter the conditions you can trust these cleats. There is also a 10 year warranty on them.

  Scanstrut is an international leader in the design and manufacture of outdoor and marine equipment. Renowned around the globe for its strict product testing, all mounts, chargers, and seals meet the highest and most demanding set of performance standards.     The Scanstrut PowerTower has been designed and engineered to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.   Designed to fit the most up to date radars from Garmin, Lowrance, Raymarine, Simrad, and Furuno Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower No need to cut the radar’s connectors off for installation Marine sealant not required Available in 2 heights Available in Aft or Forward leaning designs Range of accessories light bars can be bolted to the back of the PowerTower     Securely holds and wirelessly charges your phone even in the toughest conditions. Now you can keep your phone in reach, fully charged, and ready to go. 12/24V 100% Waterproof Mount & charge One-handed operation Works with wireless charging enabled phones of all sizes Works through non-metallic, waterproof cases     Scanstrut's range of cabling solutions eliminates time-consuming, sub-standard routing of cables and messy sealant to achieve a 100% watertight installation for your marine cables every time.   IPX68 waterproof range Easy fit cable routing that cuts down your installation time. A guaranteed 100% watertight seal Marine sealant not required       Specials    Closeouts    Remanufactured    Rebates

ROKK 10W Cove LED Wireless Phone Charging Pocket Cove LED 10W safely houses & wirelessly charges your phone at the same time.  Now you can keep your phone in a safe place on board, tucked away, charged, and ready to go! The IPX6 waterproof 12/24V Qi certified waterproof wireless charging range enables wireless charging for the outdoor environment, without the need for phone charging cables. Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use on board, with the unique 10W technology housed in an IPX5, fully encapsulated and sealed unit. The most convenient way to store and wirelessly charge your phone onboard indoors or out!  Cove 10W safely houses & wirelessly charges your phone at the same time.  Now you can keep your phone in a safe place on board, tucked away, charged, and ready to go!  Our clever design reduces the installation depth by storing and wirelessly charging the phone sideways.  Perfect for integration into consoles, bulkheads, seating, cabinetry, and more! Slide your phone into the pocket and instantly start wirelessly charging. The internal grippy mat stops your phone from sliding around and its rubberized front lip with an easy-access thumb bevel acts as a safety barrier, making sure your phone always stays safe. Cove’s LED front panel features passive air vents, encouraging cool air into the pocket and through rubber cooling channels, keeping your phone cooler for longer.  This gives you the most efficient outdoor wireless charge possible. Cove LED 10W features our waterproof LED RGB lights, allowing you to link in with any RGB control system to match your lighting around the boat seamlessly.  Perfect to match your speakers, deck, and underwater lighting. Our Cove LED 10W lighting is fully dimmable as well so you can alter light levels to suit your mood. It lets you create your own ambiance, from a relaxing soft glow to strobing party boat! Case Compatibility: ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm) Features: Compatible with all Qi Wirelessly charging electronics. Place your phone onto the center of the charging mat and instantly start wirelessly charging. Rounded corners and tapered front design eliminate all snagging risks, making it possible to install in high-traffic areas of the boat where phone charging/storage until now has been impossible. Cove LED is a part of our IPX6 waterproof 12/24V Qi-certified waterproof wireless charging range that enables wireless charging for the outdoor environment without phone charging cables. Small and compact, our charging mat design suits any boat type, unlocking charging possibilities onboard. One easy cut into your chosen mounting location, 4 screws supplied for fixing, and a front fascia to leave the finished result clean and uncluttered –you're now ready to Store.  Charge.  Connect! Cove LED is perfect for storing your other personal items such as wallets and keys as the charger will only begin to charge when a phone is placed on the mat. Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max. - 2A   Output Power - 10W (9V,1.1A) IPX6 Waterproof Qi-certified wireless charging In the Box: Pocket w/bezel Wireless charger Mounting hardware Instruction manual *Sold as an Individual 

ROKK 10W Cove Wireless Phone Charging Pocket Cove 10W safely houses & wirelessly charges your phone at the same time.  Now you can keep your phone in a safe place on board, tucked away, charged, and ready to go!  The IPX6 waterproof 12/24V Qi certified waterproof wireless charging range enables wireless charging for the outdoor environment without needing phone charging cables. Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use on board, with the unique 10W technology housed in an IPX6, fully encapsulated and sealed unit. The most convenient way to store and wirelessly charge your phone onboard indoors or out!  Cove 10W safely houses & wirelessly charges your phone at the same time.  Now you can keep your phone in a safe place on board, tucked away, charged, and ready to go!  The clever design reduces the installation depth by storing and wirelessly charging the phone sideways.  Perfect for integration into consoles, bulkheads, seating, cabinetry, and more!  Slide your phone into the pocket and instantly start wirelessly charging. The internal grippy mat stops your phone from sliding around and its rubberized front lip with an easy-access thumb bevel acts as a safety barrier, making sure your phone always stays safe.  Cove’s front panel features passive air vents, encouraging cool air into the pocket and through rubber cooling channels, keeping your phone cooler for longer.  This gives you the most efficient outdoor wireless charge possible. Case Compatibility: ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm) Features: Compatible with all Qi Wirelessly charging electronics. Place your phone onto the center of the charging mat and instantly start wirelessly charging. Rounded corners and tapered front design eliminate all snagging risks, making it possible to install in high-traffic areas of the boat where phone charging/storage until now has been impossible. The cove is a part of our IPX6 waterproof 12/24V Qi-certified waterproof wireless charging range that enables wireless charging for the outdoor environment without phone charging cables. Small and compact, our charging mat design suits any boat type, unlocking charging possibilities onboard. One easy cut into your chosen mounting location, 4 screws supplied for fixing, and a front fascia to leave the finished result clean and uncluttered –you're now ready to Store.  Charge.  Connect! The cove is perfect for storing other personal items such as wallets and keys as the charger will only begin to charge when a phone is placed on the mat. Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max. - 2A   Output Power - 10W (9V,1.1A) IPX6 Waterproof Qi-certified wireless charging In the Box: Pocket w/bezel Wireless charger Mounting hardware Instruction manual *Sold as an Individual 

ROKK Wireless Nano 10W Waterproof 12/24V Charger Dock. Charge. Connect. Nano 10W is our smallest wireless phone charging mount. It squeezes big features into a tiny package! Designed to be installed where space is at a premium, Nano 10W holds and wirelessly charges your phone at the same time! The ultra-compact design can be installed and used in any orientation, unlocking new charging possibilities. Now you can keep your phone within reach, charged, and ready to go. The IPX6 waterproof, 12/24V wireless range enables phone charging for the outdoor environment, without the need for cables. Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use onboard. Perfect for boat consoles or any vehicle working outside in the elements, Nano 10W has been designed to fit even the largest phones. Nano 10W features Qi-certified wireless charging technology with foreign object detection and thermal cut-off to guarantee your devices are kept safe and charged while onboard. The upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps. Nano 10W is compatible with all wireless charging-enabled phones of all sizes from all major brands. Charging is also possible through non-metallic, waterproof cases.  Usage Nano 10W is at home in coastal and freshwater. If you require a wireless phone charging mount for rough conditions, we recommend our ROKK Wireless – Active 10W or Edge 10W.   Testing ROKK Wireless Nano has been subjected to a high level of environmental, vibration, impact and on-water testing programs. This is combined with our world-renowned expertise in waterproofing technologies, UV stabilization techniques and premium-grade materials, ensuring Nano 10W is up to the challenge of life outdoors. Installation Installation is simple on any boat, RV, ATV or outdoor location. Four screws secure the unit onto any flat surface with a simple installation guide and drilling template. For the best phone grip performance, a vertical installation is recommended. The charger is easy to clean and can be washed down with fresh water. Features: 10W Fast Charging IPX6 Waterproof Qi Certified Mount & charge Outdoor-ready grip

ROKK 10W Waterproof Wireless Charger - Hidden The IPX6 waterproof 12/24V Qi-certified phone waterproof wireless charging range enables charging in the outdoor environment without needing phone charging cables.  Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use on board, with the unique technology housed in an IPX6, fully encapsulated and sealed unit. Working directly with 12/24V systems, Scanstrut ROKK Wireless is ideal for life on the move and perfect for sailing, powerboats, and RV.  Easy install, anywhere you need your phone - indoors or out.  No more wires! Exceeding the latest and highest standards of the Qi wireless protocol, ROKK Wireless is independently certified to deliver ultra-safe charging anywhere on board. Our new upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps. Our improvements don’t just stop there, now featuring easier phone alignment with a larger charging area, and electrical componentry that has been enhanced to significantly improve your phone's charge times, even in the harshest outdoor environments. With the same great look, ROKK Wireless is tried and tested in all corners of the globe in all weathers, and conditions. Case Compatibility: ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm) Features: Installation is simple on any boat, RV, ATV, or outdoor location.  Sub-surface, hidden from view but always ready to charge.  Engineered to be installed under the surface, leaving the top surface uncluttered and perfect.  Compatible with all Qi Wirelessly charging electronics. Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max - 2A   Output Power - 10W (9V,1.1A) IPX6 Waterproof Qi-certified wireless charging Protection - UV Resistant Dimensions (W x H) - 3.93" (100mm) x .57" (14mm) In the Box: Charger Locking ring Mounting hardware Instruction manual  *Sold as an Individual