Single Stainless Steel Block - 51mm Sheave Single block with stainless steel cheeks. Delrin™ sheave ensures smooth operation and high safe working load.  Specifications: Sheave Dia. 2" (51mm) Thickness 15/16" (24mm) Width 2 1/8" (54mm) Length 4 13/32" (112mm) SWL 1750 lbs. (795kg) Weight 7.1oz (201g) Max Line 7/16" (11mm) 

Single Stainless Steel Block - 60mm Sheave Delrin™ sheave ensures low-friction and high safe working load. Swivel head may be locked in place to eliminate line twist.  Specifications: Sheave Dia. 2 3/8" (60mm) Thickness 1 3/32" (28mm) Width 2 1/2" (64mm) Length 5 1/32" (128mm) SWL 2250 lbs. (1020kg) Weight 10.2oz (289g) Max. Line 1/2" (13mm) 

Single Aluminum Block - 51mm Sheave Single block with anodized aluminum cheeks. Delrin™ sheave ensures smooth operation with high safe working load. Swivel head may be locked in place to avoid twist.  Specifications: Sheave Dia. 2" (51mm) Thickness 15/16" (24mm) Width 2 1/8" (54mm) Length 4 13/32" (112mm) SWL 1750 lbs. (795kg) Weight 5oz. (142g) Max. Line size 7/16" (11mm) 

Single Stainless Steel Drink Holder - Vertical Mount Edson Single Stainless Drink Holder - Vertical Mount is great for mounting to the side of your bulkhead, center console or any vertical location on your boat! With the right amount of space for any drink that can fit inside of a koozie, each drink holder is designed to keep your cup, bottle or favorite coffee mug in place.

Single Ball Bearing Block Single block with aluminum cheeks and ball bearing sheave. Delrin™ ball bearing sheave ensures low-friction operation. Swivel head may be locked in place to avoid twist.  Specifications: Sheave Diameter 2" (51mm) Thickness 15/16" (24mm) Width 2 1/8" (54mm) Length 4 13/32" (112mm) SWL 1500 lbs. (680kg) Weight 5oz. (142g) Max Line 7/16" (11mm)

Series 5 Flat Base Cheek Block - Stainless Steel Cheeks Series 5 Cheek Block with Stainless Steel cheek. Delrin™ sheave ensures smooth operation and high safe working load. Stainless steel base distributes loads to a large surface area.  Specifications: Sheave Diameter 2" (51 mm) Max. Line 7/16" (11 mm) Length 3-5/8" (92 mm) Width 2-7/32" (57 mm) Height 7/8" (22 mm) Fasteners (4) #10 - RH (5 mm) C/C 3" (76 mm) SWL 1750 lbs. (795 kg) Weight 6.9 oz. (196 g) Max Line 7/16" (11mm) 

Rod Holder - Medium - 0° - Stainless Steel The choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task.

SPT1002 - Stainless Steel PowerTower® Radar Mount - 6" Aft Leaning The Scanstrut Stainless Steel PowerTower® is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Stainless Steel, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1815, 1824, 1832, 1834, 1835, DRS 2D, 42DL, 42DL+, 4D, 4D-NXT, DRS4W, NavNet 18" and 24" Humminbird - AS 21RD4KW Inerphase - Mini RE-1, 8, 9 JRC 100, 100mk2, 1066, 1500, 1500mk2, 1800, 2000 Koden - 2kW 12" Lowrance - LRA-1800/RB714A/DX42 Navman - 8000 Series - 18" Seiwa - SWR-1, SWR-8, SWR-9 Simrad - GB40, NX4-/45, NSE8/12, RB712A, DX42S Sitex - MDS-1, 8, 9, 12, NKE-1066 Techmarine - T72.01, T72.02, T-72.04 Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Stainless Steel Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Stainless Steel Height - 6" (152mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts) Installation manual *Sold as an Individual

SPT1001 - Stainless Steel PowerTower® Radar Mount - 6" Aft Leaning The Scanstrut Stainless Steel PowerTower® is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Stainless Steel, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: B & G - HALO20, HALO20+, HALO24 radars Garmin - Fantom 18 and 24, GMR18HD, 18xHD, 18HD+, GMR24HD and 24xHD, GMR40 radars Humminbird - HB2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Nobletec - 4KW radars Raymarine - QUANTUM (Q24C) and QUANTUM 2 (Q24D0, RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, 60, 64-S, GB40/NX40/45/NSE1/12 radars Sitex - RADARpc-4D Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Stainless Steel Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Stainless Steel Height - 6" (152mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts) Installation manual *Sold as an Individual

1/2" NPT 90° Stainless Steel Fuel Valve Features: Compact design 90° flow path 1/2" NPT male and female ports Use FV-590 (Brass) for fiberglass tanks Use FV-590-S (316SS) with aluminum or stainless steel tanks

7' Dredge Boom with Stainless Steel Hardware This 7' foot long Dredge Boom is made from Heavy Wall Aluminum. Polished and Bright Dip Anodized. With Stainless hardware. It has a rod ferrule with a 1.133" Outside Diameter. Made to fit #4 or 80lb class bent butts. Also comes with 20 feet of bracing line.

Snatch Block Acetal Sheave - Single - 11mm(7/16") Max. Rope Diameter Snatch blocks are a tough and reliable solution for temporary leads and line deflection. Simple and quick to deploy, they can be easily opened when the load is released. The standard snap shackle head allows the block to swivel through 360°. Soft resilient cheeks reduce clatter and protect gelcoat and painted surfaces. Attachment point provided for shock cord hanger. Features: Easily operated latch mechanism Lightweight Soft resilient cheeks Applications: Temporary sheeting point while changing sheets for boats up to 10M (33') Temporary reefing block for boats up to 10M (33') Spare or replacement block for general use on larger boats depending on line angle and load Materials: U.V. stabilized Acetal sheaves Grade 316 stainless steel frame and load strap Soft thermoplastic rubber cheeks Investment cast Grade 15-5PH stainless steel snap shackle Specifications: Sheave Ø: 51mm(2") Max. Rope Ø: 12mm(1/2") M.W.L.: 500kg(1,100lbs) B.L.: 1,000kg(2,200lbs) Weight: 250g(8.8oz)

Single Aluminum Block - 60mm Sheave Delrin™ sheave ensures smooth operation and a high safe working load. Swivel head may be locked in place to eliminate twisting.  Specifications: Sheave Diameter 2 3/8" (60mm) Thickness 1 3/32" (28mm) Width 2 1/2" (64mm) Length 5 1/32" (128mm) SWL 2250 lbs. (1020kg) Weight 7.4oz (210g) Max Line size 1/2" (13mm) 

60mm Single Aluminum Element Block with Swivel Element blocks introduce sideplates that combine forged aluminum and compound curves for strength. They are simultaneously contemporary and very robust. Element’s design pairs the minimum amount of metal required to protect the sheave with a proven journal bearing. So size for size, Element is priced significantly lower, than our previously least expensive blocks. Sideplates are hardcoat-anodized to resist corrosion. A tough composite bearing sheave resists corrosion for a long service life. Features: Sheave Ø (mm): 60 mm Sheave Ø (in): 2-3/8 in Maximum line Ø (mm): 14 mm Maximum line Ø (in): 9/16 in Maximum working load (kg): 1100 kg Maximum working load (lb): 2425 lb

60mm Single Aluminum Element Block with Swivel & Becket Element blocks introduce sideplates that combine forged aluminum and compound curves for strength. They are simultaneously contemporary and very robust. Element’s design pairs the minimum amount of metal required to protect the sheave with a proven journal bearing. So size for size, Element is priced significantly lower, than our previously least expensive blocks. Sideplates are hardcoat-anodized to resist corrosion. A tough composite bearing sheave resists corrosion for a long service life. Features: Sheave Ø (mm): 60 mm Sheave Ø (in): 2-3/8 in Maximum line Ø (mm): 14 mm Maximum line Ø (in): 9/16 in Maximum working load (kg): 1100 kg Maximum working load (lb): 2425 lb