|
6 Channel Hybrid Recorder 4 Hybrid (TVI or IP) + 2IP, 2TB, NDAA
The H6HRN2TB from Speco is a 6 channel hybrid digital video recorder with a 2TB HDD.
Features:
H.265 compression - Store up to 2x more than H.264!
1 SATA port for up to 14TB of storage
4K HDMI out and VGA monitor output
Object and line crossing detection and alerts
Smart Search - Specify a region on the camera view and search on changes in that area
|
395.20 |
|
|
6 Channel Hybrid Recorder 4 Hybrid (TVI or IP) +2IP, 2TB (For IP & Analog)
Record from and manage up to six cameras with the H6HRL 6-Channel 4K UHD HD-TVI Hybrid DVR from Speco Technologies at resolutions up to 3840 x 2160. Equipped with one SATA port, the recorder supports up to 14TB of HDD storage (2TB preinstalled). An eSATA port is available for additional storage. The recorder supports four configurable hybrid channels plus two IP camera channels, and uses H.265 video compression to keep file sizes manageable while maintaining the best quality possible. An HDMI connection provides up to 4K UHD resolution video output.
Features:
EZ Wizards simplify use and setup
Supports up to 5MP on all channels and 4K on one channel
H.265 video compression for efficient storage and bandwidth use
One SATA port for up to 14TB of storage (2TB preinstalled)
One eSATA port for up to 8TB of additional storage
Simultaneous HDMI & VGA video outputs
HDMI output supports 4K
CVBS/spot monitor video output
Object and line crossing detection and alerts with Speco Technologies Smart Analytic IP Cameras
Smart search with Speco Technologies Smart Analytic IP Cameras—search for changes in a specific area of a camera view
Two-way audio communication
Four alarm inputs and one alarm output
Free US-based DDNS and P2P server access
Remote viewing via web browser or mobile device
Video export via USB
Continuous, Motion, Analytics, and Sensor recording modes
Bookmark pins on playback for easy reference
Instant playback of individual channels directly from the live view screen
Customizable multi-channel viewing modes
Remote monitoring, recording, playback, configuration, software upgrades, and PTZ control via internet
Built-in S.M.A.R.T (Self-Monitoring, Analysis and Reporting Technology for HDD)
Works with most cameras that comply with ONVIF Profile S
Remote control included
|
345.00 |
|
|
8 Channel 4K Recorder for IP Cameras Only - Power Over Ethernet
Record from and manage up to eight cameras at resolutions up to 3840 x 2160 with the NRL Series 8-Channel 8MP NVR with 2TB HDD from Speco Technologies. It is equipped with a SATA port that supports an HDD up to 14TB (2TB preinstalled). H.265 and H.264 compressions keep file sizes manageable while maintaining the best quality possible. Two-way audio communication is supported.
This NVR supports simultaneous HDMI and VGA outputs, as well as up to 10 users. It complies with ONVIF version 2.3 for interoperability with cameras that are ONVIF compliant.
Features:
Eight PoE ports
Two USB ports
4K UHD HDMI video output
Easy video export via USB
Built-in S.M.A.R.T (Self-Monitoring, Analysis and Reporting Technology for HDD)
Smart Search with Speco Smart analytic cameras (available separately)
Compatible with most cameras that comply with ONVIF profile S
Plug-and-play feature with isolated traffic on PoE ports with Speco IP cameras (available separately)
EZ Wizards simplify use and setup
Find and install IP cameras on the local network without the need to locate the cameras manually
Instant playback for individual channels directly from the live view screen
Create bookmark pins on playback for easy reference
Customizable channel view placement
Smart analytics include abandoned object detection, missing object detection, and line crossing
Recording modes include analytics, continuous, motion, sensor, schedule, and manual
Alarm trigger events include recording, PTZ, alarm out, pop-up alarm preview, email, FTP, snapshot, buzzer & screen tips
Free US-based DDNS and P2P services
Compatible with Internet Explorer, SecureGuard VMS, and Speco Blue app for iOS and Android
|
447.00 |
|
|
6-Channel Digital Switch Module Shadow-NET™ Control for Single Color & 3rd Party Lighting
The 6-channel digital switch module offers a convenient way to integrate any standard light with the Shadow-Caster™ MFD interface. Simply plug in the module to the Shadow-NET™ system and switch support will automatically populate on the screen.
Each module provides 6 channels of support, that will handle up to 10 amps per channel with digital fault protection. There is also a manual switch input for overriding the interface.
Features:
6 independent digital switches
Control other brands of lights with the Shadow-Caster™ MFD interface and phone app
Digital over current fault protection
Manual switch override
Green/red LEDs provide the status of each channel
Full integration with Shadow-NET™ interface
The blue backlight indicates the power state
Specifications:
12/24V operation
10A each channel
5/16” power lugs
IP67 Deutsch connections
Power lug protection boots
What's Included?
6 channel digital power switch
Mounting hardware 4 #8 PH x.5”
Pre-wired mating connectors
3 year standard warranty
|
466.80 |
|
|
R1 900.6 6-Channel Marine Amplifier
The R1 900.6 marine-grade amplifier from Roswell is everything a boat's audio system has always wanted. Utilizing a 6-channel Class-D design that puts out 100 watts RMS per channel at 4Ω, these amps are perfect for powering an R1 8″ and R1 6.5″ marine speaker setup.
This amp features calibrated crossover controls, differential RCA inputs for maximum noise rejection, fully conformal-coated PCBs, and nickel-plated marine-grade wire terminals.
Features:
Ch 1-6 calibrated crossover (FULL/HPF/LPF)
Space-saving stackable design
Bridgeable 6-channel design
Marine-grade durability
2 Ohm Stable at 165 watts per channel
High-Efficiency Class-D Topology
Conformal-coated PCBs
The lit logo power indicator lets you know your amp is receiving power
Nickel-plated wire terminals
Switchable Differential RCA inputs minimize interference and induced noise
Specifications:
Continuous Power (RMS): 4Ω: 100W x 6 / 2Ω: 165W x 6
Bridged: 4Ω: 300W x 3
Frequency Response: 10Hz – 25Hz
Input Sensitivity: 0.2–10.0V
HPF (High Pass Filter): 30Hz – 300Hz
LPF (Low Pass Filter): 30Hz – 300Hz
Bass EQ: 0-18dB @ 45Hz
Dimensions: Inches: 1.90 x 7.06 x 13.67 / Centimeters: 4.83 x 17.94 x 34.74
|
694.28 |
|
|
Groco S-88 Sight Glass, 6 X 8
|
245.05 |
|
|
Threaded Antenna Support w/6" Pipe Mount, Oval 4-Way Base & 1.5" Collar
A perfect blend of form and function, Antenna Mounting Systems by Rupp combine good looks with innovative designs. Our locking collar holds the antenna securely, yet unlocks conveniently for lowering. Made of forged and anodized aluminum for strength and long lasting beauty. Threaded mounting packages are ideal for tuna towers and tops.
Features:
Mount Type: Pipe
Base: Oval 4-Way
Pipe: 6"
|
215.65 |
|
|
Threaded Antenna Support w/6" Flat Mount, Oval 4-Way Base & 1.5" Collar
A perfect blend of form and function, Antenna Mounting Systems by Rupp combine good looks with innovative designs. Our locking collar holds the antenna securely, yet unlocks conveniently for lowering. Made of forged and anodized aluminum for strength and long lasting beauty. Threaded mounting packages are ideal for tuna towers and tops.
Features:
Mount Type: Flat
Base: Oval 4-Way
Pipe: 6"
|
215.65 |
|
|
Description: 316 S.S. Straight Shock.
Length - 6"
Line Size - 3/4"
Weight - 7.8oz.
Material: 316 Stainless Steel
Fastener: 1/4" (2)
|
47.40 |
|
|
HYDRO 6 Channel Full-Range Class D Waterproof Marine Amplifier - 3000W
DS18 designed the NXL-X900.6D for customers looking for a compact and waterproof amplifier with exceptional power output and prioritizing boosting sound.
The NXL series' impressive power output is supplemented by its outstanding efficiency, and its durability in harsh conditions makes it a favorite among customers in need of a waterproof amplifier to be the powerhouse of their system.
The NXL-X900.6D comes in a 6-channel configuration making it great for powering more complicated active setups. The high pass and low pass filters will help you tune your speaker choice accurately so you can obtain crystal clarity from low volume levels all the way to the maximum for the ultimate audio experience.
All NXL units have stable and reliable 4-layer PCB layouts, IP67 waterproof rating for power sports an ultra-compact size for easy installation, and audio precision quality control verification.
The NXL Marine Amplifier series is perfect for outdoor enthusiasts looking for a durable, waterproof amplifier with intense power for their marine vehicle's audio system. This series is best used in various rugged and wet environments, such as on trails or at the lake.
Features:
Included a marine grade fuse and fuse holder that is connected inline with your main power wire will help with ultimate protection against the elements.
IP67 Waterproof Rating
UV, Salt, and Fog Protection
Direct Power Harness Design with Marine Grade OFC Tinned Wires
Latest Digital Amplifier Design With SMC Technology
Technical Specifications:
Number of Channels - 6
Frequency Response - 10Hz-20KHz
4 Ohm RMS Power - 6 x 150W
2 Ohm RMS Power - 6 x 250W
Signal-to-Noise Ratio - > 84dB
Product Dimensions: (L x W x H) - 14" x 4.4" x 1.77" (360mm x 112mm x 45mm)
*Sold as an Individual
|
839.94 |
|
|
V10 Series RCA Audio Cable - 6 Channel - 17' (5.18 M)
T-Spec's 6-channel RCA patch cable will send your musical signals cleanly across the veritable battlefield of induced noise and uncertain factory electronics in your vehicle, so you'll enjoy all of your music with none of the noise. T-Spec RCA cables resist noise due to their shielded construction and the double twisted pair arrangement of the wire inside their jackets.
Recycled copper often contains impurities that can impair a wire's conductivity, so T-Spec uses only oxygen-free non-recycled, virgin copper to maximize signal flow in their patch cables. Each machined metal RCA plug features a patented 4-way split tip that guarantees the best possible electrical contact. T-Spec's proprietary PVC jacket gives each cable great flexibility for easier installation, and the durability required for marine certification.
Features:
Double twisted-pair design minimizes noise from your system
Oxygen-free virgin copper
Split-tip RCA connectors for maximum contact area
Ultra-flexible PVC blended jacket
Marine compliant
In the Box:
6 Channel - 17' (5.18M) RCA audio cable
Instruction sheet
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
42.76 |
|
|
5M 6-Channel RCA Cable
Roswell’s 5M 6-Channel Cable carries three channel pairs through a single cable for easy installations that save time, money, and hassle. It can be used to power up to three amplifiers while still retaining full head unit functionality. Quad-shielded protection offers the ultimate in noise rejection, ensuring a clean line-level signal. This cable also pairs perfectly with Roswell's Dual Zone Volume Control.
Features:
Carry the signal to up to 3 amps direct from the head unit, or pair with the Roswell Dual Zone Volume Control
Quad-shielded cable for the ultimate in marine durability and noise rejection
5 meter length (16.5 ft)
Labelled RCA connectors for easy identification
|
62.15 |
|
|
Flush/Surface Mount 6-Channel Class D Amplifier with Acrylic Cover - 6x180W RMS @ 4 Ohm
Enhance your car audio system with DS18’s FX6!
Designed and manufactured for professional car audio applications, this amplifier delivers exceptional power and high-quality sound while maintaining a small footprint for easy installation.
What sets the FX Series apart is its versatile installation options. Unlike ordinary amplifiers, these amplifiers come equipped with a surface mount adapter, allowing for both flush and surface installation. This feature provides flexibility in positioning the amplifier, making it perfect for custom car audio builds. Not only does it guarantee optimal performance without compromising on space or aesthetics, but it also incorporates mesmerizing Digital LED lights that add a touch of style and flair to your car audio setup.
Let's talk power! DS18’s FX6 delivers an impressive MAX power of 4500W. With RMS power outputs of 6 x 180W at 4 ohms, 6 x 250W at 2 ohms, and 3 x 500W at 4 ohms bridge, you can expect nothing less than thunderous sound quality.
In addition to its impressive power capabilities, this amplifier also offers a wide range of audio features. With a frequency response of 20Hz-20KHz, a signal-to-noise ratio of 80dB, and a damping factor of 80, you can enjoy a full spectrum of sound with exceptional clarity. The selectable X-Over feature allows you to customize your audio experience, while the bass boost range and frequency allow you to fine-tune your system to your liking.
Upgrade your car audio system with DS18’s FX6 and experience unmatched power, versatility, and sound quality!
*The FX Series adapters are not designed to be water-resistant. Please exercise caution to prevent water contact with the RGB LEDs, as exposure may result in a short circuit*
Features:
6 Channel Full Range
Flush Mount / Surface Mount
6 X 180 Watts RMS @ 4 Ohm
CLASS D
RGB Dream LED Lights
Built-in Crossover / Water Resistant
Technical Specifications:
Number of Channels - 6
Frequency Response - 20Hz-20kHZ
4 Ohm RMS Power - 6x180W
2 Ohm RMS Power - 6x250W
Signal-to-Noise Ratio - >80dB
Product Dimensions - 14.25"L x 4.7"W x 1.85"H
|
839.94 |
|
|
SG-DA61500 Signature Series 1500W - 6 Channel Amp
Bring your music to life with our range of powerful Signature Series amplifiers, designed to enhance any serious on-board audio system.
CLASS-D AMPLIFIER TECHNOLOGY
The highly efficient Class-D amplifier design ensures low current draw from the battery whilst delivering increased power to the connected speakers and/or subwoofers. Taking your audio entertainment experience to a whole new level, the Signature Series amplifiers are built for high performance.
RIGID ALUMINIUM ALLOY HEAT SINK
Molded to form a singular die-cast chassis, the fin layout is calculated with precision to increase the surface area of the heat sink. This creates greater dissipation of heat and unquestionable efficiency without compromising the sleek form factor.
MARINE READY DESIGN
The Signature Series amplifiers are designed specifically for marine use, with conformal coated PCBs to provide extra protection from the marine elements. This extends the products’ lives and ensures that the amplifiers will continue to perform season after season on board.
STAINLESS MIRROR FINISH
The stunning stainless steel cover conceals all cable connections and tuning controls for a discreet yet undeniably attractive finish that will complement any installation. The stainless steel design also ensures that your Signature Series amplifier will resist rust and corrosion, extending the product life while maintaining a clean, tidy appearance.
TRUE-MARINE™ PHILOSOPHY
Fusion’s True-Marine design philosophy stems from our experience confronting the harsh marine environment. By designing and engineering from the ground up specifically for real world boating applications, our customers are assured that the equipment they fit into their vessel will deliver quality entertainment season after season.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
779.99 |
|
|
Apollo Marine 6 Channel 1800-Watt Amplifier
This 6-channel amplifier with 150-watt RMS per channel can power up to six pairs of speakers or four pairs of speakers and one subwoofer. It includes high-power mode adapters for simple bridging to increase power.
Features:
Keep the music going for longer without draining your battery as quickly
No more manual adjustments to your audio settings. The Easy Tune feature does it for you
A glance at the LED indicators lets you identify if the amplifiers have a short or if they’re overheating
Less distortion and noise, so you enjoy quality audio
Mounting brackets are included for simple installation
Don’t worry about potential overheating damage with our ignition protection design
Power & Efficiency
The Apollo amplifiers are designed to produce impressive power with less drain on your battery. This amp produces 150-watt RMS per channel.
Easy Tune Feature
These amplifiers use the Easy Tune feature, which automatically regulates audio settings. So, users can get the best quality sound without making manual adjustments.
Less Distortion
Some amplifiers distort audio when they add power. Fusions are specifically designed with minimal distortion and noise, so you can enjoy high-quality audio, even at higher volumes.
LED Indicators
Identify electrical issues at a glance. These indicator lights will show you issues with electrical currents and shorts, as well as temperature.
Mounting Brackets
Easily install the amplifiers on board with the included mounting brackets.
Ignition Protected
The ignition-protected design helps prevent potential damage from overheating.
Conformal-Coated PCBS
The amplifier’s circuit board has been specially coated to provide extra protection from the marine elements.
2 OHM Stable
Connect up to two speakers per channel, increasing setup options.
Fusion True-Marine Design
The amplifier is designed to last season after season. They have been tested to a high level of protection against salt fog, temperature, vibration, and UV.
In the Box:
One Apollo 6-channel amplifier
One mounting bracket
One power connector
Three speaker connectors with high-power mode adapters
Four 8-gauge, flat-head self-tapping screws
Four 8-gauge, pan-head self-tapping screws (for mounting bracket)
Four screw covers
Fuse holder
Mounting template
Installation instructions
ISPI
Specifications:
Physical Dimensions without Bracket (L x W x H): 11.69" x 7.06" x 1.75" (297 x 180 x 45 mm)
Physical Dimensions with Bracket (L x W x H): 11.69" x 7.06" x 2.13" (297 x 180 x 50 mm)
Weight: 5.95 lb (2.7 kg)
Water Rating: IPX2
Amplifier Class: Class-D
CEA-2006 Power Rating: 150 watt RMS x 6 @ 14.4 V input - 4 ohm < 1% THD
Total Rated Power Output, 2 Ohm (Watts): 290 watt RMS x 6 @ 14.4 V input - 2 ohm < 1% THD
Total Rated Power Output, 4 ohm Bridged (watts): 580 watt RMS x 3 @ 14.4 V input - 4 ohm Bridged < 1% THD
Peak Power (watts): 1800 watts
Input Sensitivity: 1.6 V RMS
Input Impedance: 22k ohm
Operating Voltage: 10.8 V - 16 V DC
Current Draw, in Standby/off Using Amplifier on Wire: < 5 mA @ 14.4 V input
Current Draw, On, No Audio: < 1.32 A @ 14.4 V input
Fuse Rating: 125 A electronic fuse (no replacement necessary)
Power-Cable Fuse Model and Rating: Bussmann™ BK/AMI-030 30 A fast-acting
Ignition Safety Protected (SAE J1171): Yes
Protection Circuits: Reverse voltage, input under/over voltage, over temperature, and output short circuit
Operating temperature range: 32° to 122° F (0° to 50° C)
Warranty: 3 years
|
959.99 |
|