|
Primarily used for fuel tank vent outside of the engine compartment. For pleasure boats only. Temperature range is -5°F to +180°F. Meets SAE J1527 Type B2 standards.
|
215.00 |
|
|
Primarily used for fuel tank vent outside of the engine compartment. For pleasure boats only. Temperature range is -5°F to +180°F. Meets SAE J1527 Type B2 standards.
|
125.00 |
|
|
Resists gasoline/alcohol blended fuel and is fire resistant. Weather/UV resistant NBR/PVC cover, temp range -20°F to 160°F. Primarily used for fuel vent lines (gasoline up to 85% ethanol blended fuel, or diesel fuel). Meets USCG Type A2, SAE J1527 Type A2 and ISO 7840 Type A2 requirements, NMMA/CE Type accepted standards.
|
246.00 |
|
|
Polyester reinforced hose with plastic barrier veneer and outer layer tube to limit permeation. Complies with EPA and CARB low permeation requirements. Weather and UV resistant. Temp ranges from -20°F to 212°F. Primarily for fuel feed (gasoline up to 85% ethanol blends, diesel/bio-diesel blends). Meets USCG Type A1-15 requirements for pleasure boats, SAE JI127 Type A1-15, ISO 7840 Type A1, and NMMA/CE type acceptance standards.
|
168.00 |
|
|
Polyester reinforced hose with plastic barrier veneer and outer layer tube to limit permeation. Complies with EPA and CARB low permeation requirements. Weather and UV resistant. Temp ranges from -20°F to 212°F. Primarily for fuel feed (gasoline up to 85% ethanol blends, diesel/bio-diesel blends). Meets USCG Type A1-15 requirements for pleasure boats, SAE JI127 Type A1-15, ISO 7840 Type A1, and NMMA/CE type acceptance standards.
|
185.00 |
|
|
Polyester reinforced hose with plastic barrier veneer and outer layer tube to limit permeation. Complies with EPA and CARB low permeation requirements. Weather and UV resistant. Temp ranges from -20°F to 212°F. Primarily for fuel feed (gasoline up to 85% ethanol blends, diesel/bio-diesel blends). Meets USCG Type A1-15 requirements for pleasure boats, SAE JI127 Type A1-15, ISO 7840 Type A1, and NMMA/CE type acceptance standards.
|
195.00 |
|
|
OMC 479 type cable (1979 & later). Complete drop-in replacement cable for OMC O/B and I/O's. Stainless steel and brass fittings. 6" minimum bend radius. WHILE QUANTITIES LAST.
|
74.99 |
|
|
Mercury/Mercruiser 600A type cable. Complete drop-in replacement cable for Mercury/Mercruiser engines. Stainless steel & brass fittings. Stainless cable wire. WHILE QUANTITIES LAST.
|
64.59 |
|
|
Mercury/Mercruiser 600A type cable. Complete drop-in replacement cable for Mercury/Mercruiser engines. Stainless steel & brass fittings. Stainless cable wire. WHILE QUANTITIES LAST.
|
76.79 |
|
|
Designed specifically to be used with late model Mercury 4000 series controls. Engineered to significantly reduce or eliminate cable "Wig-Wag", this design results in a significantly improved feel with less shifting effort. Improves the feel of the Mercury 4000 Series Controls. Nickel plated brass swivel tube. WHILE QUANTITIES LAST.
|
76.99 |
|
|
Constructed with THV barrier layer to prevent permeation, polyester reinforcement and CPE weather and UV resistant cover. EPA and CARB compliant. Hose construction is easy to rig, clamp and maintains flexibility under a range of extreme environmental conditions. Gray color keeps hose cooler to help prevent vapor lock. For use in above deck primer bulb applications. Resistant to ethanol blend fuels. Not fire retardant. Meets SAE J1527 Type B1-15 requirements.
|
154.00 |
|
|
Double Sided 1-1/8" Quick Connect Fitting with O-Rings for Auto Ballast System
Quick Release Connect on either end allowing it to connect to either the straight and elbow Quick Release Connectors. A great jumper fitting for those that want to remove their piggy backed ballast bag.
*Sold as an Individual
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
16.78 |
|
|
Welded Ring - 8mm(5/16") Thickness - 42.5mm(1-5/8") ID
Round Welded Stainless Steel Ring
8mm(5/16") Thickness
42.5mm(1-5/8") Inner Diameter
|
11.45 |
|
|
TastePURE Heated Drinking Water Hose - 25' - 5/8"ID
The core of the Camco TastePURE Heated Drinking Water Hose is made with an NSF 61 certified, drinking water safe hose that is BPA, phthalate and lead free. The TastsePURE Heated Drinking Water Hose won't leach harmful chemicals into your water or leave it tasting like plastic the way standard garden hoses do. It is ideal for RVs, livestock, agriculture, kennels and other industrial, commercial and residential uses. Its energy saving thermostat only heats as needed, saving you money on your electric bill. The fittings are heavy-duty machined and plated for maximum corrosion resistance and the durable exterior jacket protects water hose and electrical components from damage or exposure. CSA Low Lead Content Certified to NSF/ANSI 372. Compliant with all federal and state level Low Lead Laws. Includes female-to-male adapter to allow connection to the water supply on either end of hose, depending on the location of the electrical outlet. Durable exterior jacket protects water hose and electrical components from damage or exposure.
Features:
Heavy-duty machined and plated fittings for maximum corrosion resistance
ID: 5/8 in.
Length: 25 ft.
Ideal for water line freeze protection down to minus 20°F (minus 28°C) with an energy saving thermostat
Operates on 120VAC
Made with NSF-61 certified drinking water safe hose
|
118.20 |
|
|
EvoFlex 75' RV/Marine Drinking Water Hose - 5/8" ID
Camco’s EvoFlex 75-Foot Drinking Water Hose with a 5/8-inch ID is ideal for RV and marine use. Its extra flexible construction holds no memory, making it easier to position and store. It features nickel-plated machined fittings and stainless steel strain reliefs on each hose end. Drinking water is safe with a lead-free, BPA-free, and phthalate-free formulation. The hose leaves no strong plastic taste in your water. UV stabilized for long life. Made in the USA.
Features:
Extra Flexible Design: Holds no memory, making it easier to position and store
The Perfect Size Hose: 75-foot hose with 5/8-inch diameter
Drinking-Water Safe: Contains a BPA-free, lead-free, and phthalate-free formulation
Provides Great Tasting Water: The hose won't leave a strong plastic taste in your water
Durable Construction: Features nickel-plated machined fittings with stainless steel strain reliefs; UV Stabilized: For a long life
Made in the USA: The product is proudly made in the USA
|
45.00 |
|