|
STA-RITE A100EHL MTR PKG-0010 115/230
|
723.63 |
|
|
March Mag-Drive Pump 115/230V Cast Iron Flanged Ports
Applications for the 830-CI Magnetic Drive Pump include hot water and hot oil systems.
March Pump's industrial 830-CI is an American seal-less centrifugal magnetic drive pump ideal for applications such as hot water systems. It is capable of generating a maximum flow of 15 gallons per minute at 11 feet, and its maximum head is 30.5 Feet (or around 13PSI). The standard wet end (the materials that come into contact with the solution) is composed of Cast Iron, Stainless Steel, Ceramic, Ryton/Teflon/Carbon, and Nitrile/Fibre. The inlet connection is a flange, and the outlet is a flange. The standard motor is a 1 Phase 115/230V 0.2 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 150PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius.
Unit System 60Hz 50Hz Max Flow
15 GPM
52.9 LPM
Max Head
30.5 FT
6.5 M
Power
.2 HP
.149 KW
Electrical
115/230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
Flange
Outlet
Flange
Wet End
Cast Iron (Front Housing), Stainless Steel (Rear Housing, Shaft), Ceramic (Thrust Washer), Ryton/Teflon/Carbon (Impeller), Nitrile/Fibre (Gasket)
|
978.30 |
|
|
STA-RITE PKG 115 PREFILTER-5" TRAP PKG
|
192.01 |
|
|
STA-RITE PKG 108 REVERSING ADAPTER
|
212.03 |
|
|
Sta-Rite SNC-L Shallow Well Jet Pump 1/2HP
1/2 HP - 115/230 Volt - Shallow Well Jet Pump
The ProJet SN Series Pumps provide excellent performance with good pressure for wells to 25 feet deep. Self-priming after the priming chamber has been filled with water.
APPLICATIONS
Water systems and sprinkling
FEATURES
Quality Construction
Close grained cast iron body. Drain port provided for easy winterizing.
Built-in Jet
High strength Lexan nozzle and venturi for maximum resistance to corrosion and abrasion. Clean out plug provided for ease of service.
Noryl Impeller
Precision-molded for perfect balance ultra-smooth for highest performance and efficiency.
Precision Molded Diffuser
Pump primes faster, handles more air, with multi-port, precision-molded, reinforced polypropylene diffuser.
Mechanical Shaft Seal
Precision lapped and highly polished carbonceramic, stainless steel construction. Internal design guarantees continuous water lubrication.
Motor Windings
Superior insulation materials protect against excessive moisture and contaminants assure prolonged motor life.
Balanced Rotor
Die cast under high pressures for uniform performance and greater efficiency, dynamically balanced.
Heavy-duty Ball Bearings
Shielded, permanently lubricated bearings, extensively tested to ensure extended life and smooth, quiet operation.
Pump and Motor Shaft
Stainless steel for maximum corrosion resistance; one-piece threaded shaft for positive impeller drive and alignment.
Dustproof Cover
All electrical components are protected from dirt, dust and insects by a dustproof canopy; ventilating air cannot contaminate vital switching components.
Pressure Switch
Professional quality, allows cut-in adjustments.
SPECIFICATIONS
Max. Liquid Temperature: 140°F
Max. Inlet Pressure: 50 PSI
|
869.76 |
|
|
Sta-Rite HMSE-1FL Multi-Stage Jet-Centrifugal Pump 1HP
Sta-Rite- Multi-Stage Jet-Centrifugal Pump, Convertible, Cast Iron Construction, 1HP 115/230V Motor, 1-1/4" Suction Port, 1" Drive and Discharge Ports, 30/50PSI Pressure Switch, For Shallow or Deep Wells
|
1923.12 |
|
|
Sta-Rite JHC-61HL Centrifugal Pump High Head 1/2HP
Sta-Rite- Centrifugal Pump, High Head, Cast Iron Construction, 1/2HP 115/230V Motor, 1-1/4" Suction and 1" Discharge Ports, up to 40GPM, up to 82 Feet of Head, Maximum Lift is 25 Feet
|
979.92 |
|
|
Sta-Rite JHD-62HL Centrifugal Pump High Head 3/4HP
Sta-Rite- Centrifugal Pump, High Head, Cast Iron Construction, 3/4HP 115/230V Motor, 1-1/4" Suction and 1" Discharge Ports, up to 47GPM, up to 100 Feet of Head, Maximum Lift is 25 Feet
|
1060.56 |
|
|
Sta-Rite JHE-63HL Centrifugal Pump High Head 1HP
Sta-Rite- Centrifugal Pump, High Head, Cast Iron Construction, 1HP 115/230V Motor, 1-1/4" Suction and 1" Discharge Ports, up to 61GPM, up to 112 Feet of Head, Maximum Lift is 25 Feet
|
1135.44 |
|
|
Sta-Rite JMF-40L Centrifugal Pump Medium Head 1-1/2HP
Sta-Rite- Centrifugal Pump, Medum Head, Cast Iron Construction, 1-1/2HP 115/230V Motor, 1-1/4" Suction and 1" Discharge Ports, up to 97GPM, up to 97 Feet of Head, Maximum Lift is 25 Feet
|
1133.28 |
|
|
Sta-Rite MSE-7 Vertical Multi-Stage Jet Pump 1HP
Sta-Rite- Vertical Multi-Stage Jet Pump, Convertible, Cast Iron Construction, 1HP 115/230V Motor, 1-1/4" Suction and Drive Ports, 1" Discharge Port, 40/60psi Pressure Switch, For Shallow or Deep Wells
|
1532.88 |
|
|
Sta-Rite PNC-10 Shallow Well Jet Pump 1/2HP
Sta-Rite Shallow Well Jet Pump, Fiberglass Reinforced Thermoplastic Construction, 1/2HP 115/230V, 1-1/4”NPT Suction x 1”NPT Discharge Ports, up to 7GPM at 40psi, Pressure Switch Set to 30psi On / 50psi Off, up to 25 Foot Water Depth
|
797.04 |
|
|
Sta-Rite PND-10 Shallow Well Jet Pump 3/4HP
Sta-Rite Shallow Well Jet Pump, Fiberglass Reinforced Thermoplastic Construction, 3/4HP 115/230V, 1-1/4”NPT Suction x 1”NPT Discharge Ports, up to 10.3GPM at 40psi, Pressure Switch Set to 30psi On / 50psi Off, up to 25 Foot Water Depth
|
863.28 |
|
|
Sta-Rite PWP-01 Shallow Well Jet Pump 3/4HP
Sta-Rite Shallow Well Jet Pump, Fiberglass Reinforced Thermoplastic Construction, 3/4HP 115/230V, 1-1/4”NPT Suction x 1”NPT Discharge Ports, up to 10.3GPM at 40psi, No Pressure Switch, up to 25 Foot Water Depth
|
732.24 |
|
|
Sta-Rite 7P4CO2JL Submersible Well Pump 4” 1/2HP
Sta-Rite- Submersible Well Pump, for 5" or Larger Wells, Stainless Steel Pump and Motor Housing, 7GPM Series, 3 Wire, 1/2HP 230V, 1-1/4”NPT Port
|
639.75 |
|