HOT FOOT™ Universal Original Foot Throttle for All Marine Engines Now compatible with all Mercury 175-300 Pro XS outboard motors The Original and ONLY real HOT FOOT™ Throttle Drive your boat safer by driving it like your car. This is the one and only HOT FOOT™ throttle - the original boat foot throttle that has been on the market for 30+ years. This throttle allows you to drive your boat like you do your car. You keep both hands on the wheel and control the throttle with your foot. The throttle returns to idle if you remove your foot. This throttle is a must-have for safe operation of high performance boats. Features: Drive your boat like you drive your car -- features make driving your boat fun and safe Number one throttle on the market for over 20 years Provides added safety and performance Improves throttle control for all outboard and inboards All cast aluminum and stainless steel hardware Lightweight and resistant to corrosion Stainless steel hardware and non-sticking teflon and nylon bearing surfaces for trouble free operation Nylon and teflon bushings on all critical pivot points Stainless steel spring returns engine to idle position when released Equipped with toe clip for additional safety in extreme operating conditions Uses standard control cables for easy hook-up (longer throttle cable not included) Mounts directly to floor of boat with four screws (not included) Patented Idle Stop for FICHT and Optimax Engines Optional Slide Mount (HFM-1-DP) available for comfort and multiple drivers WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Yamaha Fuel Line Kit - 3/8" Diameter x 6' Length (No Tank Fitting) This Attwood Fuel Line Kit is a reliable replacement for the original equipment on Yamaha engines and tanks. The kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb. Features: These Attwood Hose Fittings Are Included: A pair of hose fittings 8896LP6 for the tank end and the engine end for Yamaha engines and tanks *No Fuel Demand Valve or Tank Fitting is included in this kit

Universal Fuel/Water Separator Kit with Bracket Keep your engine running at peak efficiency by filtering out any water that may get into the fuel system. 10-micron filtering capability and fits all 2 and 4-cycle engines. Features: 10 Micron Filter and bracket included Outfitted with 2 brass plugs for secure connections and universal 3/8 inch (.85cm) ports Double seal for enhanced performance Replaces Mercury 35-60494A4

      Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.     The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces! For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.   SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html     Specials    Closeouts    Remanufactured    Rebates  

Zeus A275L Vortec Alternator with Terminal Block The highest power output alternator in its size/class.  Features: Engineered for High Energy Production. Suitable for Marine, RV, Military, and Commercial applications. Rapidly charges large battery banks. Coolest operating temperatures for increased performance. Runs 8 - 20% cooler than incumbent alternators due to:    - Heat shedding coatings    - Rectifier located on housing exterior    - Dual cooling fans    - OEM Components It is optimized for performance at idle speeds. Reduces the need for a generator by creating additional power with your engine. Unleash peak performance with E-Coat/Cerakote. Our advanced coating absorbs less heat, keeping the A275L cooler. This translates to more amperage for sustained periods. Use an ARCO Zeus Bluetooth alternator regulator for maximum performance or lithium battery charging. SAE J1171 Certified. Made in the U.S.A. Technical Specifications: Voltage - 12v Field Type - P Rotor Poles - 16 Stator Size - 138mm Frame Size - Large Weight - 14.9 lbs/6.7 kg Regulation - External Only (These units will come with a terminal block and a P-Type harness. They will only work with an external regulator, such as an ARCO Zeus Bluetooth alternator regulator.) Output Voltage - 14.1v (Default) Finish - (Black) Cerakote or E-coating Cut-In RPM - 1,061 Alternator RPM Maximum Alt RPM - 19,000 Battery Post - M8 Thread Post, Side Mount Standard Pulley - 49K6 (6-groove, 49mm) Pulley Mount - 17mm diameter shaft, 25mm long, threaded M17 x 1.5 Pulley Hardware - M17 x 1.5 x 24mm nut, w/ 18mm ID x 29mm OD washer (Included) Diodes - 6 positive, 6 negative, 50A Rated, Avalanche Max Output (Cold, 9,000 RPM) - 311 Amps Sustained Cruising Output (Hot, 6,000 RPM) - 227 Amps Sustained Idle Output (Hot, 3,000 RPM) - 198 Amps Max Continuous Operating Temperature - 110°C / 230°F Mounting Application: Replaces Mando-type alternators using Vortec/GM pad mounting feet. (Found on many Mercruiser and Volvo Penta 3.0GLM, 3.0GLP, 4.3GXi, 5.7GiL, 5.7GXiL Marine Engines.) (GM Blocks) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Zeus A275L Vortec Alternator with Regulator The highest power output alternator in its size/class.  Features: Engineered for High Energy Production. Suitable for Marine, RV, Military, and Commercial applications. Rapidly charges large battery banks. Coolest operating temperatures for increased performance. Runs 8 - 20% cooler than incumbent alternators due to:    - Heat shedding coatings    - Rectifier located on housing exterior    - Dual cooling fans    - OEM Components It is optimized for performance at idle speeds. Reduces the need for a generator by creating additional power with your engine. Unleash peak performance with E-Coat/Cerakote. Our advanced coating absorbs less heat, keeping the A275L cooler. This translates to more amperage for sustained periods. Use an ARCO Zeus Bluetooth alternator regulator for maximum performance or lithium battery charging. SAE J1171 Certified. Made in the U.S.A. Technical Specifications: Voltage - 12v Field Type - P Rotor Poles - 16 Stator Size - 138mm Frame Size - Large Weight - 14.9 lbs/6.7 kg Regulation - Internal/External (Internally regulated with adaptor for optional external regulation.) Output Voltage - 14.1v (Default) Finish - (Black) Cerakote or E-coating Cut-In RPM - 1,061 Alternator RPM Maximum Alt RPM - 19,000 Battery Post - M8 Thread Post, Side Mount Standard Pulley - 49K6 (6-groove, 49mm) Pulley Mount - 17mm diameter shaft, 25mm long, threaded M17 x 1.5 Pulley Hardware - M17 x 1.5 x 24mm nut, w/ 18mm ID x 29mm OD washer (Included) Diodes - 6 positive, 6 negative, 50A Rated, Avalanche Max Output (Cold, 9,000 RPM) - 311 Amps Sustained Cruising Output (Hot, 6,000 RPM) - 227 Amps Sustained Idle Output (Hot, 3,000 RPM) - 198 Amps Max Continuous Operating Temperature - 110°C / 230°F Mounting Application: Replaces Mando-type alternators using Vortec/GM pad mounting feet. (Found on many Mercruiser and Volvo Penta 3.0GLM, 3.0GLP, 4.3GXi, 5.7GiL, 5.7GXiL Marine Engines.) (GM Blocks)  This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

6" Hole Shot Plate for Z-Lock™ Jack Plate REVOLUTIONARY...SIMPLE...UNIQUE...EXCITING. These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple but revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That's 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take-off as well as serving as a center trim tab. An added advantage is the ability to stay on a plane and virtually eliminate porpoising at lower speeds. Models available for Z-LOCK™ manual plates.   Features: Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

8" Hole Shot Plate for Z-Lock™ Jack Plate REVOLUTIONARY...SIMPLE...UNIQUE...EXCITING. These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple but revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That's 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take-off as well as serving as a center trim tab. An added advantage is the ability to stay on a plane and virtually eliminate porpoising at lower speeds. Models available for Z-LOCK™ manual plates.   Features: Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

10" Hole Shot Plate for Z-Lock™ Jack Plate REVOLUTIONARY...SIMPLE...UNIQUE...EXCITING. These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple but revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That's 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take-off as well as serving as a center trim tab. An added advantage is the ability to stay on a plane and virtually eliminate porpoising at lower speeds. Models available for Z-LOCK™ manual plates.   Features: Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MS-BB100 Marine Black Box AM/FM/BT - 2 Zone Introducing the MS-BB100, a compact black box entertainment solution that incorporates the marine industry supported Fusion-Link protocol and Fusion's proven marine engineering skillset to deliver a boat load of tunes.  An industry first, the BB100 includes an easy touch Bluetooth embedded IPx7 water resistant remote for quick audio adjustments.  Supplied with a 2m (6.6ft) connection cable, the wired remote is ideally shaped for hassle free installation onto a dash or boat console.  With the Bluetooth receiver embedded into the remote we can reduce the likelihood of interference occurring between your smartphone and the receiver.  Engineered for either a flush or flat mount installation, you can choose the finish to suit your vessel. NMEA 2000  Ready for connection and control from any supported Multi-Function Display - The MS-BB100 is a Fusion-Link Wired NMEA 2000 certified product and is compatible with a range of the world’s leading Multi-Function Displays for on-screen audio control. When pairing the MS-BB100 with a supported chartplotter or fish finder, you bring your music to the big screen, allowing you to keep an eye on the charts or the fish while skipping tracks or adjusting the volume at the same time. In addition to MFD control, the BB100 will connect to any Fusion NRX series remote control attached to the same powered NMEA 2000 network for localized control of the audio zones Fusion-Link™ makes control of your stereo easier than ever.  Quickly find your favorite song, tune in to the sports or turn up the volume all from your partnered multifunction display (MFD), compatible smartphone, Garmin Handheld or Garmin watch.  With the app installed, you can enjoy source navigation and track selection from wherever you are on your boat. Multi-Zone Control With two independent audio zones available, each with advanced localized menu controls, including zone naming, you can easily customize and control your listening experience in each zone. Features: Small footprint Black Box design with included Bluetooth embedded wired remote IPx7 water resistant wired remote with quick Bluetooth pairing Flush or flat mounting remote control installation options Fusion-Link NMEA 2000 Ready for connection and control from any supported Multi-Function Display Multi-Zone™ Technology – Two independent audio zones are available, each with advanced localized menu controls, including zone naming True-Marine™ Designed and Engineered – Extensively tested to perform in the harsh marine environment Technical Specifications: 2 Zones 200 Watts peak power NMEA 2000 compatible  Class AB Amplifier Rear USB connection Dimensions (W/H/D) - 6-1/8" x 2-3/8" x 3-11/16"  Remote Dimensions (Diameter/Depth) - 2-9/16 x 3/16"  In the Box: Media Black Box Remote - Wired Remote Mounting Hardware/Gasket Remote Mounting Template 6' NMEA 2000 Drop Cable Power Wiring Harness Aux/Line-out Harness Documentation *SiriusXM Promotion - Get 3 Free Months SiriusXM Streaming Service - LINK *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Additional Remote Control Unit f/2-Way Boat Alarm System Protects your boat and valuable equipment from theft. Features: Two Way Remote Alerts with Sound, Light & Vibration WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Hybrid Wash Mitt - Extremely Plush Microfiber Wash Mitt for Gently Waxing While Washing Meguiar's Hybrid Wash Mitt is a premium dual-sided wash mitt designed to optimize your results and your washing experience with Meguiar's Hybrid Ceramic Wash & Wax. Each side of this specialized mitt is uniquely engineered to maximize the washing attributes of Hybrid Ceramic Wash & Wax with one side and the wax with the other. The Orange Washing Side is a chenille microfiber that holds onto suds and gently washes away dirt and grime. Then, the Grey Waxing Side is a plush microfiber that absorbs the Hybrid Ceramic SiO2 Boost and helps to spread it evenly for maximum water beading protection. Hybrid Wash Mitt can also be used with other Meguiar's car washes for gentle and effective cleaning. *Meguiar's Hybrid Ceramic Wash & Wax not included. Features: IDEAL USE: Optimized for use with Meguiar's Hybrid Ceramic Wash & Wax to maximize your experience and results  USE WITH OTHER WASHES: Can be used with other Meguiar's washes; Both sides offer gentle and effective cleaning when used with other car washes DUAL SIDED: Specifically engineered with two distinct sides to maximize either the washing or waxing attributes of the Hybrid Ceramic Wash & Wax CLEAR COAT SAFE: Extremely soft and plush fibers gently lift dirt and grime while adding wax protection on clear coat and single stage paint REUSABLE: Luxurious hand wash mitt that is machine washable and reusable

Universal Box Top for All-Around, Masthead and Stern Lights This Light Bar Top is a universal box top for all-round, masthead & stern lights. Please note that lights are not included.

ATLAS™ Hydraulic Gauge Kit for 4" & 8" ATLAS™ Jack Plate - Black Bezel Digital LED Position Gauge for Atlas™ Hydraulic Jack Plates. Features: All Digital Readout Black Face and Stainless Steel FaceGauges Available Outer Bezel available in Stainless Steel or Black Polymer Each Number Indicates 1/4” Rise Numbered from 0 to 20 All AtlasTM Jacks are Pre-drilled to Fit See pictures to the right to view both styles WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ATLAS™ Hydraulic Gauge Kit for 4" & 8" ATLAS™ Jack Plates - Stainless Steel Bezel Digital LED Position Gauge for Atlas™ Hydraulic Jack Plates. Features: All Digital Readout Black Face and Stainless Steel FaceGauges Available Outer Bezel available in Stainless Steel or Black Polymer Each Number Indicates 1/4” Rise Numbered from 0 to 20 All AtlasTM Jacks are Pre-drilled to Fit See pictures to the right to view both styles WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.