|
ShadeFin Mini Deck Mount with Backing Plate
Designed for boat decks, console tops, or any flat surface, the deck mount is a secure and permanent mounting option for ShadeFin Mini. When not in use, simply remove the ShadeFin Mini from the deck mount and stow.
Features and Benefits:
Includes six mounting screws for installation
Powder-coated aluminum 6061 alloy
Includes an injection-molded nylon cap
Includes a backing plate and mounting hardware
3-year limited warranty
Specifications:
Finish: Powder coated, misty silver
|
58.80 |
|
|
ShadeFin Mini Semi-Flush Mount with Backing Plate
The ShadeFin Mini Semi-Flush Mount is ideal for boat decks, console tops, or any flat surface. The unique design of the semi-flush mount enables the post to be removed and stowed when not in use, leaving only a semi-flush ring secured in place. To use the Semi-Flush Mount, simply install the threaded locking ring and the post to the semi-flush ring, tighten securely, and mount the ShadeFin Mini.
Features and Benefits:
Constructed out of aluminum-grade 6061 alloys with stainless steel Type-304 screws
Includes an injection-molded nylon cap
Includes a backing plate and mounting hardware
3-year limited warranty
Specifications:
Finish: Anodized aluminum finish
|
62.15 |
|
|
ShadeFin Mini Semi-Flush Mount with Backing Plate
The ShadeFin mini side mount is ideal for consoles, side walls, gunnel walls, or deck railings of boats.
Features and Benefits:
Constructed out of aluminum-grade 6061 alloys and stainless steel Type 304
Includes an injection-molded nylon cap
Includes a backing plate and mounting hardware
3-year limited warranty
Specifications:
Finish: Powder coated, misty silver
|
70.25 |
|
|
ShadeFin Mini Clamp Mount
ShadeFin Mini's highly portable clamp mount quickly connects to any square rail, table, deck rail, or lip up to 2.25" thick and is a great solution for pontoon boat rails.
Features and Benefits:
Easily installed to most railing sizes
Includes two screws that can be securely tightened
Constructed out of aluminum-grade grade-6061 alloys with two threaded stainless steel Type-304 clamping rods
includes an injection-molded nylon cap and knobs
3-year limited warranty
Specifications:
Finish: Powder coated, misty silver
|
88.34 |
|
|
ShadeFin Mini Kayak Mount
The Shadefin Mini Kayak Mount is designed for most sit-on-top kayaks. The outer sections of the mount extend out from the center, enabling the width to be adjusted, depending on the size of the kayak, up to 26.75”. The Kayak Mount also pairs with most standard kayak railing systems on the market, such as YakAttack GearTrac.
Features and Benefits:
Powder-coated aluminum
Includes well nuts and mounting hardware
Adjustable base up to 26.75" wide
3-year limited warranty
Specifications:
Weight: 2 lbs. 1.2 oz
Finish: Powder coated, misty silver
|
90.53 |
|
|
Dashboard Mount with Backing Plate for 8" Tablets with Cases
This vehicle kit consists of a RAM® Tab-Tite™ spring-loaded holder for 8" tablets with a case, a medium B-size double socket arm, two 2.5" diameter round bases that contain the universal AMPS hole pattern, a 2.10" x 2.60" backing plate, and mounting hardware.
The mount is designed with a 1-diameter B-size rubber ball and socket system that features adjustment points at both ends of the double socket arm, allowing for near-infinite adjustability for ideal viewing angles.
Features:
The spring-loaded holder secures most 8 in. tablets with a case; interchangeable end cups allow you to modify the holder when upgrading devices
Includes a 4-hole AMPS pattern ball adapter, a B-size medium-length double socket arm, and a backing plate kit for drill-down mounting; ball and socket technology allows for near-infinite adjustability
Made of powder-coated, marine-grade aluminum and high-strength composites for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly Hardware, (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers
Holder Dimensions (inch): Height Range: 7.125" - 9.5", Width Range: 5.06" - 5.68", Depth Range: .13" - 1"
Socket to Socket Length (inch): 3”
Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter
Plate Size (inch): 2.5" Diameter
Ball Size (inch): B size (1”)
Weight Capacity: The standard use is 2 lbs. and the heavy-duty use is 1 lb.
Materials: Marine-grade aluminum, high-strength composite, and powder-coated steel
Weight: 1.04 lb.
Compatible Devices:
Apple: iPad mini 6 with Case
Amazon: Fire 7 Kids, Fire HD 8 Kids, and Fire HD 8 with Case
ASUS: MeMO Pad 8 with Case, VivoTab 8 with Case
Dell: Venue 8 with Case, Venue 8 (2014) with Case, Venue 8 7840 with Case, and Venue 8 Pro with Case
Huawei: MediaPad M3 with Case, MediaPad M3 Lite with Case, MediaPad T1 8.0 with Case, and MediaPad T3 8 with Case
Lenovo: Ideapad Miix 300 with Case, IdeaTab A2107 with Case, Tab 2 A8 with Case, Tab 4 8 with Case, Tab 4 8 Plus with Case, Tab A8-50 with Case, Tab S8 with Case, and Tab3 8 with Case
LG: G Pad F 8.0 (2nd Gen) with Case, G Pad F2 8.0 with Case, G Pad II 8.0 with Case, and G Pad X II 8.0 with Case
Nvidia: Shield Tablet with Case
Panasonic: Toughpad FZ-M1
Samsung: Galaxy Tab 2 7.0 with Case, Galaxy Tab 3 8.0 with Case, Galaxy Tab A 8.4 with Case, Galaxy Tab A7 Lite 8.7 with Case, Galaxy Tab E 8.0 with Case, Galaxy Tab Pro 8.4 with Case
|
57.71 |
|
|
Dashboard Mount with Backing Plate for 7"-8" Tablets with Cases
The RAM® Tab-Tite™ bundle is a rugged mount including the RAM® Tab-Tite™, RAM® Universal Double Ball Mount with Two Round Plates, and RAM® Backing Plate Adapter. The RAM® Tab-Tite™ spring-loaded, quick-release holder offers a secure fit with easy access to the mounted tablet. The spring-loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions.
The RAM-101U-B consists of a short double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allow for almost infinite adjustment and perfect viewing angles. The included 2.10" x 2.60" steel backing plate with #8-32 threaded holes attaches to a variety of RAM® Mounts ball bases.
Features:
The spring-loaded holder secures 7 in. -8 in. tablets with a case; interchangeable end cups allow you to modify the holder when upgrading devices
Drill-down mounting solution; choose either round plate featuring the AMPS hole pattern for attachment to compatible device holders
2.10 in. x 2.60 in. steel backing plate attaches to a variety of RAM® Mounts ball bases
Ball and socket technology allows for near-infinite adjustability
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly Hardware, (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers
Holder Dimensions (inch): Height Range: 8.32" - 10.92", Width Range: 4.43" - 5.3", Depth Range: .13" - .62"
Socket to Socket Length (inch): 2.5”
Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter
Ball Size (inch): C size (1.5”)
Weight Capacity: The standard use is 4 lbs. and the heavy-duty use is 3 lbs.
Materials: Marine-grade aluminum, high-strength composite, powder-coated steel
Weight: 1.98 lb.
Compatible Devices:
Samsung: Galaxy Tab 4 8.0 with Otterbox Defender Case, Galaxy Tab A 8.0 (2017) with Case, Galaxy Tab A 8.0 (2018) with Case, Galaxy Tab A 8.0 (2019) with Case, Galaxy Tab S 8.4 with Otterbox Defender Case, Galaxy Tab E 8.0 with Verizon Rugged Case, and Galaxy Tab Active2
|
74.64 |
|
|
Double Ball Mount with Backing Plate
This mount consists of a double socket arm, two 2.5" diameter round bases that contain the universal AMPS hole pattern, a 2.10" x 2.60" backing plate, and mounting hardware. The mount is designed with a 1" diameter rubber ball and socket system that features adjustment points at both ends of the double socket arm, allowing for near-infinite adjustability for ideal viewing angles.
Features:
2.10 in. x 2.60 in. steel backing plate attaches to a variety of RAM® Mounts ball bases
2.5 in. round plate with a B-size 1 in. RAM® rubber ball connects to RAM® device holders containing the universal AMPS hole pattern; includes a B-size medium-length double socket arm
Made of stainless steel and high-strength composites for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
Hardware Included: (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers
Product Dimensions (inch): Overall Height: 5"
Socket to Socket Length (inch): 3”
Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter
Plate Size (inch): 2.5" Diameter, 3" x 3" Square Plate
Ball Size (inch): B size (1”)
Weight Capacity: The standard use is 2 lbs. and the heavy-duty use is 1 lb.
Materials: Marine-grade aluminum and stainless steel
Weight: 0.79 lb.
|
33.95 |
|
|
X-Grip® Dashboard Mount with Backing Plate for 9"-10" Tablets
The RAM® X-Grip® universal holder for 9"-10" tablets features an 'X' design that expands and contracts to provide a perfect fit for your device – even if it's in a case. Included are easy-access grip knobs located on the back of the holder for quick release of your tablet. No matter what double socket arm and mounting base you pair the RAM® X-Grip® with, RAM® ball and socket technology allow for near-infinite adjustability to achieve the ideal viewing angle while also extending the life of your tablet by providing shock and vibration damping.
The RAM-101U-B consists of a short double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allow for almost infinite adjustment and perfect viewing angles.
Features:
Spring-loaded 'X' design with rubber caps sports great holding power without obstructing your tablet; fits most 9 in. -10 in. tablets
Drill-down mounting solution; choose either round plate featuring the AMPS hole pattern for attachment to compatible device holders
2.10 in. x 2.60 in. steel backing plate attaches to a variety of RAM® Mounts ball bases
Made of high-strength composite and steel components for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly Hardware, (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers
Holder Dimensions (inch): Max Height: 10.25" (using optional supports), Width Range: 6.25" - 8.1", and Max Depth: .875"
Socket to Socket Length (inch): 2.5”
Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter
Plate Size (inch): 2.5" Diameter
Ball Size (inch): C size (1.5”)
Weight Capacity: The standard use is 4 lbs. and the heavy-duty use is 3 lbs.
Materials: Marine-grade aluminum and high-strength composite
Weight: 2.42 lb.
Compatible Devices:
Amazon: Fire HD 10
Apple: iPad (1st Generation), iPad (3rd Generation), iPad (4th Generation), iPad (5th Generation), iPad (6th Generation), iPad (7th Generation), iPad (8th Generation), iPad (9th Generation), iPad (10th Generation), iPad 2, iPad 9.7 (2017), iPad 9.7 (2018), iPad Air, iPad Air 2, iPad Air 3, iPad Air 4, iPad Air 5, iPad Pro 9.7 (1st Generation), iPad Pro 10.5 (2nd Generation), iPad Pro 11", iPad Pro 11" (2020), iPad Pro 11" (2021), and iPad Pro 11" (2022)
ASUS: MeMO Pad FHD 10, Transformer Pad, ZenPad 10, ZenPad 3S 10, and ZenPad Z10
Dell: Venue 10 7000, Venue 11 Pro, and Venue 11 Pro 7000
Google: Nexus 10 and Pixel C
HP: ElitePad 900, ElitePad 900 G1, Pro 610, and Pro Slate 10.1
Huawei: MediaPad M2 10.0, MediaPad M3 Lite 10.0, and MediaPad T3 10
Lenovo: Miix 3, Tab P12 Pro, S6000, Tab 2 A10-70, Tab 4 10, Tab 4 10 Plus, Tab A10, Tab3 10 Business, ThinkPad 10, ThinkPad Tablet 2, Yoga Book, Yoga Tab 3 10, Yoga Tab 3 Pro, Yoga Tablet 10, Yoga Tablet 10 HD+, and Yoga Tablet 2 (10 inches)
LG: G Pad 10.1, G Pad II 10.1, G Pad X 10.1, and G Pad X II 10.1
Microsoft: Surface 2, Surface Pro, Surface Pro 2, Surface Go, and Surface Go 2
Nokia: T21
Samsung: Galaxy Book 10.6, Galaxy Tab 10.1, Galaxy Tab 2 10.1, Galaxy Tab 3 10.1, Galaxy Tab 4 10.1, Galaxy Tab A 9.7, Galaxy Tab A 10.5, Galaxy Tab A8 10.5, Galaxy Tab Active Pro, Galaxy Tab Active4 Pro, Galaxy Tab Pro 10.1, Galaxy Tab S 10.5, Galaxy Tab S2 9.7, Galaxy Tab S3 9.7, Galaxy Tab S4 10.5, Galaxy Tab S5e, Galaxy Tab S6, Galaxy Tab S7, Galaxy Tab S7 FE, Galaxy Tab S7 Plus, Galaxy Tab S8, and Galaxy Tab S8 Plus
Sony: Vaio Tap 11, Xperia Tablet S, and Xperia Tablet Z
Vankyo: MatrixPad Z4 10"
Zebra: ET50 10" and ET55 10"
|
123.79 |
|
|
Dashboard Mount with Backing Plate for 9"-10.5" Tablets with Cases
This rugged dashboard tablet mount consists of a RAM® Tab-Tite™ spring loaded holder for any 9 in. -10.5 in. tablets with a case, a medium C-size double socket arm, two 2.5 in. diameter round bases that contain the universal AMPS hole pattern, a 2.10" x 2.60" backing plate, and mounting hardware.
The mount is designed with a 1.5" diameter C-size rubber ball and socket system that features adjustment points at both ends of the double socket arm, allowing for near-infinite adjustability for ideal viewing angles.
Features:
A spring-loaded holder secures most 9-10.5 in. tablets with cases; interchangeable end cups allow you to modify the holder when upgrading devices
Includes 4-hole AMPS pattern ball adapter, a C-size medium-length double socket arm, and a backing plate kit for drill-down mounting; ball and socket technology allows for near-infinite adjustability
Made of powder-coated, marine-grade aluminum and high-strength composites for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly Hardware, (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Screws, (4) #8 Split Lock Washers, (4) #8 Flat Washers
Holder Dimensions (inch): Height Range: 9.5" - 12.125", Width Range: 6.55" - 7.43", Depth Range: .3" - .875"
Socket to Socket Length (inch): 2.5”
Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter
Ball Size (inch): C size (1.5”)
Weight Capacity: The standard use is 4 lbs. and the heavy-duty use is 3 lbs.
Materials: Marine-grade aluminum, high-strength composite, powder-coated steel
Weight: 1.9 lb.
Compatible Devices:
Apple: iPad (5th Generation) with Case, iPad (6th Generation) with Case, iPad (7th Generation) with Case, iPad (8th Generation) with Case, iPad (9th Generation) with Case, iPad (10th Generation) with Case, iPad 9.7 (2017) with Case, iPad 9.7 (2018) with Case, iPad Air with Case, iPad Air 2 with Case, and iPad Pro 10.5 (2nd Generation) with Case
ASUS: ZenPad 10 with Case, ZenPad 3S 10 with Case, and ZenPad Z10 with Case
Dell: Venue 10 7000, Venue 11 Pro, and Venue 11 Pro 7000
Huawei: MediaPad M2 10.0 with Case
Lenovo: Tab 2 A10-70 with Case, Tab 4 10 with Case, Tab 4 10 Plus with Case, Tab3 10 Business with Case, and Yoga Tab 3 10 with Case
LG: G Pad 10.1 with Case, G Pad II 10.1 with Case, G Pad X 10.1 with Case, and G Pad X II 10.1 with Case
Microsoft: Surface Go with Case and Surface Go 2 with Case
Samsung: Galaxy Tab 10.1 with Case, Galaxy Tab 3 10.1 with Case, Galaxy Tab 8.9 with Case, Galaxy Tab A 9.7 with Case, Galaxy Tab A 10.5 with Case, Galaxy Tab Pro 10.1 with Case, Galaxy Tab S2 9.7 with Case, Galaxy Tab S3 9.7 with Case, Galaxy Tab S4 10.5 with Case, Galaxy Tab S6 with Case, Galaxy Tab S7 with Case, and Galaxy Tab S8 with Case
Sony: Xperia Tablet Z with Case
Vankyo: MatrixPad Z4 10"
|
77.58 |
|
|
Drill-Down Dashboard Mount with Backing Plate - C Size Medium
Meet the new go-to mount and component option for pairing any holder or dock with a dashboard drill-down mount. The RAM-101-225B2U consists of a C-size medium-length double socket arm, two round 2.5" diameter round bases with the universal AMPS hole pattern, and one 2.10" x 2.60" steel backing plate (hardware included).
RAM®'s patented rubber ball and socket technology dampens shock and vibration and allows for near-infinite adjustment, enabling the perfect viewing and operating angle of your device.
Features:
Drill-down double ball mount with a 2.10 x 2.60 in. steel backing plate that connects to RAM® components containing the universal AMPS hole pattern
Includes a C-size 1.5 in. RAM® rubber ball and a medium-length double socket arm; ball and socket technology allows for near-infinite adjustability
Components made of powder-coated, marine-grade aluminum, and steel for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
Hardware Included: (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Machine Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers
Product Dimensions (inch): Overall Height: 7.35"
Socket to Socket Length (inch): 4.66”
Hole Pattern: Round Plate:, 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter
Ball Size (inch): C size (1.5”)
Weight Capacity: The standard use is 4 lbs. and the heavy-duty use is 3 lbs.
Materials: Marine-grade aluminum and steel
Weight: 1.4 lb.
|
53.16 |
|
|
Drill-Down Dashboard Mount with Backing Plate - C Size Short
Meet the new go-to mount and component option for pairing any holder or dock with a dashboard drill-down mount. This mount consists of a C-size short-length double socket arm, two round 2.5" diameter round bases with the universal AMPS hole pattern, and one 2.10 x 2.60 in. steel backing plate (hardware included). RAM®'s patented rubber ball and socket technology dampens shock and vibration and allows for near-infinite adjustment, enabling the perfect viewing and operating angle of your device.
Features:
Drill-down double ball mount with a 2.10 x 2.60 in. steel backing plate that connects to RAM® components containing the universal AMPS hole pattern
Includes a C-size 1.5" RAM® rubber ball and a short double socket arm; ball and socket technology allows for near-infinite adjustability
Components made of powder-coated, marine-grade aluminum, and steel for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
Hardware Included: (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Machine Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers
Product Dimensions (inch): Overall Height: 5.225"
Socket to Socket Length (inch): 2.5”
Hole Pattern: Round Plate:, 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter
Ball Size (inch): C size (1.5”)
Weight Capacity: The standard use is 4 lbs. and the heavy-duty use is 3 lbs.
Materials: Marine-grade aluminum and steel
Weight: 1.16 lb.
|
51.46 |
|
|
Tab-Tite™ Drill-Down Mount with Backing Plate for Small Tablets
This mount consists of a 2.10" x 2.60" backer plate, double socket arm, round base adapter, and Tab-Tite™ universal clamping cradle. The spring-loaded Tab-Tite™ cradle makes it easy to load and unload your tablet while keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet. By allowing access to audio jacks, USB, power, and other ports, your tablet can be used just as it was intended.
The Tab-Tite™ cradle is compatible with any tablet that fits the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
Specifications:
Hardware Included: Assembly Hardware, (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers
Holder Dimensions (inch): Height Range: 7.375" - 10", Width Range: 4" - 5.31", Depth Range: .13" - 1.06"
Socket to Socket Length (inch): 3”
Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter
Ball Size (inch): B size (1”)
Weight Capacity: The standard use is 2 lbs. and the heavy-duty use is 1 lb.
Materials: Marine-grade aluminum, high-strength composite, and steel
Weight: 1.2 lb.
|
57.88 |
|
|
ShadeFin Mini with Black Fabric - Bag & Round Rail Mount Kit
ShadeFin Mini provides boaters, anglers, and families with portable, convenient, and easy-to-use shade with virtually unlimited angle adjustment. With a variety of mounting options, ShadeFin Mini is simple to set up wherever you need extra protection from the sun.
Shade for Any Boat
ShadeFin Mini is ideal for bass boats, flats boats, bay boats, kayaks, pontoons, skiffs, and any boat with limited-to-no coverage from the sun. Its versatile design and hearty construction ensure reliable, hassle-free shade protection that can withstand the harsh marine environment.
Features & Benefits
Comes with a bag and a round rail mount
Light, compact, and portable
Virtually unlimited angle adjustment
Height adjusts from 36 to 52 in.
Can be "clustered" with multiple ShadeFin Minis to cover a large area
Sold separately, mounting options include a clamp mount, rod holder mount, deck mount, semi-flush mount, and side wall mount
60" x 38" coverage area
Reduces to 38" x 6" x 5" when not deployed
Constructed of durable, UV-, corrosion-, and mildew-resistant materials
Features powder-coated aluminum frame with injection-molded nylon components and stainless steel fasteners
Fabric is high-quality WeatherMAX 3D
UPF (Ultraviolet Protection Factor) rating of 50+ (“Excellent” rating)
Made of high-quality anodized aluminum parts
3-year limited warranty
Specifications:
Fabric Color: Black
Mount: Round rail mount
|
695.99 |
|
|
ShadeFin Mini with White Fabric & Bag
ShadeFin Mini provides boaters, anglers, and families with portable, convenient, and easy-to-use shade with virtually unlimited angle adjustment. With a variety of mounting options, ShadeFin Mini is simple to set up wherever you need extra protection from the sun.
Shade for Any Boat
ShadeFin Mini is ideal for bass boats, flats boats, bay boats, kayaks, pontoons, skiffs, and any boat with limited-to-no coverage from the sun. Its versatile design and hearty construction ensure reliable, hassle-free shade protection that can withstand the harsh marine environment.
Features & Benefits
Light, compact, and portable
Virtually unlimited angle adjustment
Height adjusts from 36 to 52 in.
Can be "clustered" with multiple ShadeFin Minis to cover a large area
Sold separately, mounting options include a clamp mount, rod holder mount, deck mount, semi-flush mount, and side wall mount
60" x 38" coverage area
Reduces to 38" x 6" x 5" when not deployed
Constructed of durable, UV-, corrosion-, and mildew-resistant materials
Features powder-coated aluminum frame with injection-molded nylon components and stainless steel fasteners
Fabric is high-quality WeatherMAX 3D
UPF (Ultraviolet Protection Factor) rating of 50+ (“Excellent” rating)
Made of high-quality anodized aluminum parts
3-year limited warranty
Specifications:
Fabric Color: White
Mount: No mount
|
635.99 |
|