Tuthill 00LEV-CC-7 Pump 1Gpm 1/2Ports Cast Iron Rotary Gear Pump Pump End Only, NO motor Cast Iron Construction Has Internal Relief Valve. Relief valve is set at 55 PSI (can be adjusted in field) Counter Clockwise rotation only (from shaft end view) Inlet Port is 3/8 inch NPT, Discharge Port is 3/8 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 0.5 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU      

Tuthill 000LEV-C-7 Pump 0.5Gpm 3/8 Ports Pump Body: Cast Iron  Relief Valve: Relief valve is factory set to 55 PSI with adjustment between 55-120 PSI Shaft Seal: Mechanical Seal Viton Port Size: Inlet Port is 3/8 inch NPT, Discharge Port is 3/8 inch NPT Product Specs : Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 0.5 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 1LEV-CC-7 Pump 3.2 Gpm 1/2" Ports Pump Body: Cast Iron Relief Valve: Relief valve is factory set to 55 PSI for adjustment between 55-120 PSI.  Shaft Seal: Mechanical Seal Viton Port Size: Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT. Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 00LE-K-C Pump 1Gpm 1/2" Ports

Tuthill 00LE-K-C-7 Pump 1Gpm 1/2 Ports Pump Body: Cast Iron Shaft Seal: Mechanical Seal Viton Port Size:Inlet Port is 1/2 inch NPT Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 1.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 4C2EV-CC-7 Pump 36Gpm Ccw W/Rv Tuthill 4C2EV-CC-7, Cast Iron Rotary Gear Pump. Pump End Only. 36 GPM C Series. Cast Iron Construction NO motor. Has Internal Relief Valve. Relief valve is set at 90 PSI (can be adjusted in field). COUNTER Clockwise rotation only (from shaft end view). Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.   Features : Pump Body:Cast Iron  Relief Valve:Relief valve is factory set to 90 PSI for adjustment between 30-225 PSI. Other PSI ranges available.  Shaft Seal:Sleeve Bushing Lip Seal Viton  Port Size:Inlet Port is 1-1/2 inch NPT Discharge Port is 1-1/2 inch NPT.

Myers Pumps ME40P-1 Effluent Pump 4/10Hp 115V Myers ME40P-1 Cast Iron Effluent Pump Specifications VOLTAGE: 1ø, 115V, 60 Hz HORSEPOWER: 0.4 HP AMP DRAW (full load): 12.0 MOTOR TYPE: Permanent Split Capacitor (PSC) RPM: 1650 MAXIMUM HEAD: 32' MAXIMUM CAPACITY: 80 GPM SWITCH TYPE: Tethered Automatic MINIMUM SUMP DIAMETER: Simplex 24" Duplex 36" DISCHARGE PIPE SIZE: 1-1/2" FNPT MAXIMUM SOLIDS HANDLING SIZE: 3/4" Spherical Solids IMPELLER TYPE: Cast Iron, Two-Vane Enclosed CORD LENGTH: 10' CORD SIZE: 16-3; Type: SJTW BODY CONSTRUCTION: Cast Iron MAXIMUM LIQUID TEMPERATURE: 140°F (60°C)

Tuthill 00LEV-A-CC-7 Tang Pump W/Rv Pump Body: Cast Iron Relief Valve: Relief valve is factory set to 55 PSI for adjustment between 55-120 PSI.  Shaft Seal: Mechanical Seal Viton Port Size: Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 1.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 2LEVK-C-7 Pump 6.2Gpm with Reverse & Outer Bearing

Tuthill 2RC2AS-RH Pump with Tang Shaft Tuthill Pump 2RC2AS-RH

Tuthill 000LE-A-7 Pump 3/8 Port Type: Internal Gear Maximum Flow Rate: 0.5 gpm Max Pressure: 300 psi Inlet/Outlet Port Sizes: 3/8 in NPT Pump Body Material: Cast Iron Wetted Materials: Steel, Carbon, Bronze, P/M Steel, PPS O-Ring Material: Viton, Neoprene, EPR Seal: Viton Mechanical Seal Configuration Assembly: Tang Shaft

Tuthill 4C2B-C-7 Pump 36 Gpm 1 1/2Ports Tuthill 4C2B-C-7, Cast Iron Rotary Gear Pump. Pump End Only. 36 GPM C Series. Cast Iron Construction NO motor. Flange mount. Clockwise rotation only (from shaft end view). Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.   Features : Pump Body:Cast Iron  Shaft Seal:Mechanical Seal Viton  Port Size:Inlet Port is 1-1/2 inch NPT Discharge Port is 1-1/2 inch NPT.

Tuthill 00LE-A-C-7 Pump 1Gpm Short Shaft Pump Body: Cast Iron Shaft Seal: Mechanical Seal Viton Port Size:Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 1.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 2LEV-CC-A-7 Pump Tang Drive Cast Iron Rotary Gear Pump Pump End Only L Series Pump Cast Iron Construction Has Internal Relief Valve Relief valve is set at 55 PSI (can be adjusted in field) Counter-clockwise rotation only (from shaft end view) Tang Shaft Inlet Port is 1/2 inch NPT Discharge Port is 1/2 inch NPT Positive Displacement Internal Rotary Gear Design Open Flow at 1800 RPM : 5.6 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 4105V-CC-A-7 Pump Tang Shaft Viton Cast Iron Rotary Gear Pump Pump End Only 5.6 GPM 4105 Series Pump Cast Iron Construction Has Internal Relief Valve Relief valve is set at 55 PSI (can be adjusted in field) COUNTER Clockwise rotation only (from shaft end view) Tang Shaft Inlet Port is 1/2 inch NPT Discharge Port is 1/2 inch NPT