LinkUp Intelligent Battery Sensor Gateway - 12V - 500AH Easily installed LinkUp gateway modules replace the original wiring, delivering power to the LinkUp device and sensor from the NMEA 2000 backbone while still compliant with the NMEA 2000 certification. Thanks to their passive wireless receiver, the configuration is done in a snap using your mobile device, and the LinkUp Configurator app is available for Android and iOS devices. The sensor parameters are configured to type, instance, and warning threshold on the mobile device and then tapped against the LinkUp device for instant data download. Features: NMEA 2000® certified Wireless configuration through companion mobile App Status LED Plug-and-Play installation and configuration Specifications: Operating voltage - 6-18V Permanent load current - ±200A Maximum current - ±1500A Maximum battery capacity - 500Ah Threaded GND bolt - M6 Power consumption - ≤ 15 mA (normal mode) Output signal - NMEA 2000® Dimensions - 125mm x 32mm (+cables) Protection class - IP X9/K (LinkUp) IP6K7 (Sensor) Operating temperature - -40°C to +115 °C Flammability - UL94 Housing material - PC-FR Compliance - CE, UKCA, Reach, RoHS, ISO8846:1990 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

LinkUp - Intelligent Battery Sensor (IBS) Kit - 12V Batteries are essential for engine starting and operating onboard utilities.  With Veratron’s new Intelligent Battery Sensor (IBS), it’s simple to monitor their status and health in real-time.  The system works with any OceanLink, AcquaLink or NMEA 2000-networked display, and is compatible with the latest glass cockpit systems. The system includes a Veratron LinkUp Gateway Module that enables the Intelligent Battery Sensor to be connected to and compatible with the NMEA 2000 network.  Its internal galvanic isolation decouples the backbone power from the LinkUp power supply, per NMEA requirement. Veratron’s Intelligent Battery Sensor (IBS) measures vital battery parameters: voltage, current and temperature, as well as state of charge, health and function. This provides the essential information needed to plan energy usage aboard and be aware of potential problems. The IBS system monitors a single battery or full bank.  Multiple LinkUp kits can be used to provide data specific to house, starter and system-specific supplies.  It works with 12V starter, gel or AGM battery types. The IBS simply clamps onto the negative pole terminal.  Completely sealed, it has a watertight 3A inline fuse within the housing.  This connects to the NMEA 2000 backbone through the innovative LinkUp Gateway Module and enables Veratron’s numerous sensors to communicate with the network. Configuring a LinkUp gateway is simple using a mobile device and the companion Veratron app available from the App Store and Google Play.  Each module has a built-in passive wireless antenna. The parameters of the sensor are configured to type, instance and warning threshold on the mobile device and then tapped against the LinkUp device for instant data download. Alternatively, LinkUp devices can be configured via NMEA 2000 with the PC Configuration Tool. This method additionally allows for real-time reading of the analog signal. An LED on the device will illuminate, notifying the user that the LinkUp is being configured. *Includes sensor and Link Up Gateway. Features: NMEA 2000® certified Wireless configuration through companion mobile App Status LED Plug-and-Play installation and configuration Input Signal - LIN bus Nominal Voltage - 12V *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

LinkUp - Intelligent Battery Sensor (IBS) Kit - 24V Batteries are essential for engine starting and operating onboard utilities.  With Veratron’s new Intelligent Battery Sensor (IBS), it’s simple to monitor their status and health in real-time.  The system works with any OceanLink, AcquaLink, or NMEA 2000-networked display, and is compatible with the latest glass cockpit systems. The system includes a Veratron LinkUp Gateway Module that enables the Intelligent Battery Sensor to be connected to and compatible with the NMEA 2000 network.  Its internal galvanic isolation decouples the backbone power from the LinkUp power supply, per NMEA requirement. Veratron’s Intelligent Battery Sensor (IBS) measures vital battery parameters: voltage, current, and temperature, as well as state of charge, health, and function. This provides the essential information needed to plan energy usage aboard and be aware of potential problems. The IBS system monitors a single battery or full bank.  Multiple LinkUp kits can be used to provide data specific to house, starter, and system-specific supplies.  It works with 12V starter, gel, or AGM battery types. The IBS simply clamps onto the negative pole terminal.  Completely sealed, it has a watertight 3A inline fuse within the housing.  This connects to the NMEA 2000 backbone through the innovative LinkUp Gateway Module and enables Veratron’s numerous sensors to communicate with the network. Configuring a LinkUp gateway is simple using a mobile device and the companion Veratron app available from the App Store and Google Play.  Each module has a built-in passive wireless antenna. The parameters of the sensor are configured to type, instance, and warning threshold on the mobile device and then tapped against the LinkUp device for instant data download. Alternatively, LinkUp devices can be configured via NMEA 2000 with the PC Configuration Tool. This method additionally allows for real-time reading of the analog signal. An LED on the device will illuminate, notifying the user that the LinkUp is being configured. *Includes sensor and Link Up Gateway. Features: NMEA 2000® certified Wireless configuration through companion mobile App Status LED Plug-and-Play installation and configuration Input Signal - LIN bus Nominal Voltage - 24V *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

LinkUp - Intelligent Battery Sensor (IBS)  Batteries are essential for engine starting and operating onboard utilities.  With Veratron’s new Intelligent Battery Sensor (IBS), it’s simple to monitor their status and health in real-time.   Veratron’s Intelligent Battery Sensor (IBS) measures vital battery parameters: voltage, current and temperature, as well as state of charge, health and function.  All these parameters will be available via NMEA2000.  This provides the essential information needed to plan energy usage aboard and be aware of potential problems. The IBS system monitors a single battery or full bank.  Multiple LinkUp kits can be used to provide data specific to house, starter and system-specific supplies.  It works with 12V starter, gel or AGM battery types.   The IBS simply clamps onto the negative pole terminal.   Features: NMEA 2000® certified Plug-and-Play installation and configuration Input Signal - LIN bus Nominal Voltage - 12V *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Intelligent Battery Sensor 12V - 500A After the simple electrical and mechanical integration, the sensor accurately measures the battery voltage, current, and temperature parameters and internally calculates the State Of Charge, State Of Health, and Time Remaining accordingly. Technical Specifications: Operating Voltage - 6-16.5V Operating Current (Permanent) -  ± 155A Max Current - ± 1500A (500 ms) Power Consumption - ≤ 15 mA (normal mode), ≤ 120 μA (sleep mode) Max Battery Capacity - 249 Ah Operating Temperature - -40°C to 155°C This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

85mm (3-3/8") VMH-35 Multifunction Gauge with Battery Sensor The Veratron VMH 35 is engineered for single inboard or outboard engine applications.  The Veratron VMH 35 has an embedded NMEA 2000 gateway that distributes sensor data inputs such as fuel, trim, and tachometer to other devices like chartplotters.  This saves the need for an additional external converter.  Highly adaptable to a wide range of onboard networks, it's equipped with analog inputs, making it ideal for refitting with older engines. An integrated GPS makes the VMH 35 the perfect standalone navigation solution.  It integrates speed, compass, and position into the engine data information.  A dedicated Veratron IBS (Intelligent Battery System) input can provide critical 12V battery monitoring capabilities. The Veratron VMH 35 has a mineral glass front that's optically bonded to the sun-readable hybrid display.  A sleek, brushed stainless steel bezel surrounds the device and fits into classic and modern marine décors.  Because small boat consoles are often fully exposed, the round display is waterproof to IPX7 criteria, both front and back.   It fits a standard 3-3/8" panel cutout size. Features: Integrated high-performance GNSS receiver Integrated Analog to NMEA 2000 Gateway Waterproof to IPX7 Stylish black-glass design with brushed stainless-steel ring New generation sun-readable color hybrid display Intelligent Battery Sensor (IBS) port NMEA 2000® certified In the Box: VMH35 Gauge Wire harness  Mounting Spinlock Outboard Engine Kit w/IBS (B00062402) Safety Instructions *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

85mm (3-3/8") VMH-35S Multifunction Gauge with Voltage Dependent (0-5V) Sensor Input & Battery Sensor The first in its new VMH line of premium marine gauges, the Veratron VMH 35-S was engineered for single inboard or outboard engine applications. The elegant black-glass design displays a wealth of critical boat system data, in a compact package that's perfect for dashboards, consoles, and bulkheads on smaller vessels with limited space. The Veratron VMH 35-S has an embedded NMEA 2000 gateway that distributes sensor data inputs such as fuel, trim, and tachometer to other devices like chartplotters. This saves the need for an additional external converter. Highly adaptable to a wide range of onboard networks, it's equipped with analog inputs, making it ideal for refitting with older engines. An integrated GPS makes the VMH 35-S the perfect standalone navigation solution. It integrates speed, compass, and position into the engine data information. A dedicated Veratron IBS (Intelligent Battery System) input can provide critical 12V battery monitoring capabilities. The Veratron VMH 35-S has a mineral glass front that's optically bonded to the sun-readable hybrid display. A sleek brushed stainless steel bezel surrounds the device and fits into classic and modern marine décors. Because small boat consoles are often fully exposed, the round display is waterproof to IPX7 criteria, both front and back. It fits a standard 85mm (3-3/8’’) panel cutout size. Powered by the latest microprocessor, the Veratron VMH 35-S is blazingly fast. Yet even when set at full brightness, it draws a mere 170mA of power—a fraction of what a comparably-sized TFT screen uses. The VMH 35-S has the capacity to provide 30 types of data including engine, EcoMode pop-up screen, RPMs up to 8'000 with a programmable overspeed alarm, tank levels, battery status, GPS, and vessel information. It's easily configured using the embedded on-screen menu and soft-touch buttons. Features: Integrated high-performance GNSS receiver Intelligent Battery Sensor (IBS) port Analog inputs: 1x 0-5V / 1x resistive / 1x frequency Stylish black-glass design with brushed stainless-steel ring Front ring: Brushed stainless steel Front lens: Mineral glass Display: Color IBN + 1.44" TFT optically bonded Connectors: Molex MX-150 12 pins / DeviceNet M12 5 pins NMEA 2000 certified with embedded analog gateway Technical Specifications: Nominal voltage: 12V Operating voltage: 9-16V Current consumption: ≤ 150 mA (normal mode) Protection class: IP X7 Dimensions: 100 mm (outer) and 85 mm (mounting hole) Cable lengths: 6m This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

LinkUp Intelligent Temperature & Pressure This Sensor measures simultaneously the engine oil's temperature and pressure while providing the data to the LinkUp, which translates it to the NMEA 2000® standard. Features: Interface to the new electronic 2-in-1 sensor Oil Temperature and Pressure in a single sensor Rugged and reliable design derived from the automotive field ASIC-controlled sensor PWM (Pulse Width Modulated) output to transmit both pressure and temperature Technical Specifications: M12 mounting thread IP 69/K protection class 5V power feed provided by the LinkUp Temperature accuracy ± 1°K in the 135 °C – 160 °C range Pressure accuracy ± 0.2 bar (range 0.5 –3 bar), ± 0.1 bar below and ± 0.3 bar above Temperature range: -40 °C + 160 °C Pressure range: 0.5 to 10.5 bar 1M cable length This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

LinkUp - Pyrometer Kit The system includes a Veratron LinkUp Gateway Module that enables the Pyrometer Sensor to be connected to and compatible with the NMEA 2000 network.  Its internal galvanic isolation decouples the backbone power from the LinkUp power supply, per NMEA requirement.  Configuring a LinkUp gateway is simple using a mobile device and the companion Veratron app available from the App Store and Google Play.  Each module has a built-in passive wireless antenna. The parameters of the sensor are configured to type, instance and warning threshold on the mobile device and then tapped against the LinkUp device for instant data download. Alternatively, LinkUp devices can be configured via NMEA 2000 with the PC Configuration Tool. This method additionally allows for real-time reading of the analog signal. An LED on the device will illuminate, notifying the user that the LinkUp is being configured. *Includes sensor and Link Up Gateway. Features: NMEA 2000® certified Wireless configuration through companion mobile App Status LED Plug-and-Play installation and configuration Input Signal - LIN bus Nominal Voltage - 12V *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

LinkUp Analog to NMEA 2000 Gateway The resistive-type LinkUp gateway provides an easy method to convert vessel and engine information to NMEA 2000. Easily installed, the LinkUp Gateway replaces the original wiring, delivering power to both the LinkUp device and sensor from the NMEA 2000 backbone while still being complaint with the NMEA 2000 certification requirements.  Configuring the LinkUp Gateway is simple using a mobile device and the companion LinkUp Configuration App for Android or IOS. Each device has a built-in passive NFC antenna, so the parameters of the sensors are wirelessly configured to type, instance and warning threshold on the mobile device which is then "tapped" against the LinkUp device for instant data download.  Features: User-friendly configuration through wireless interface and companion smartphone App Sensor Cable length - 25cm NMEA 2000 Cable length - 25 cm Tap to download parameters Mobile App for Android or IOS No power required to program No certification required Bi-directional communication, programming interface or data recovery Supported Sensors: Fuel Level Oil/Boost Pressure Fresh/Waste Water Level Oil/Gear Oil/Coolant Temperature Trim Tabs Rudder Angle Technical Specifications: Standard M12 NMEA 2000 plug LED Notification  Operating Voltage - 6 - 16.5V Nominal Voltage - 12 V (from NMEA 2000 network) IPX7 Rated Sensor Plug - Superseal Female 2 Pin Counterpart Sensor Plug - - Superseal Male 2 Pin *Sold as an Individual  This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

LinkUp J1939 to NMEA 2000 Gateway This single-sensor gateway is designed to upgrade your vessel sensors to NMEA 2000®. Can be easily configured through either the embedded wireless interface or NMEA 2000® by means of our Configuration Tool.  The ISO 8846:1990 compliance completes the devices by allowing their installation into compartments. Features: Waterproof sensor connection No external power supply required Wireless configuration through companion mobile App Explosion-proof housing body for engine room installation Standard DeviceNet M12 plug to interface NMEA 2000 Input signal - SAE J1939 Nominal Voltage - 12V *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

85mm (3-3/8") VMH-35 Multifunction Gauge The Veratron VMH 35 is engineered for single inboard or outboard engine applications.  The Veratron VMH 35 has an embedded NMEA 2000 gateway that distributes sensor data inputs such as fuel, trim, and tachometer to other devices like chartplotters.  This saves the need for an additional external converter.  Highly adaptable to a wide range of onboard networks, it's equipped with analog inputs, making it ideal for refitting with older engines. An integrated GPS makes the VMH 35 the perfect standalone navigation solution.  It integrates speed, compass, and position into the engine data information.  A dedicated Veratron IBS (Intelligent Battery System) input can provide critical 12V battery monitoring capabilities. The Veratron VMH 35 has a mineral glass front that's optically bonded to the sun-readable hybrid display.  A sleek, brushed stainless steel bezel surrounds the device and fits into classic and modern marine décors.  Because small boat consoles are often fully exposed, the round display is waterproof to IPX7 criteria, both front and back.   It fits a standard 3-3/8" panel cutout size. Features: Integrated high-performance GNSS receiver Integrated Analog to NMEA 2000 Gateway Waterproof to IPX7 Stylish black-glass design with brushed stainless-steel ring New generation sun-readable color hybrid display Intelligent Battery Sensor (IBS) port NMEA 2000® certified In the Box: VMH35 Gauge Mounting Spinlock Wire harness  Safety Instructions  *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

52mm (2-1/16") IBM Kit - 12V Whether on the water, in an RV, riding the trail, or operating a piece of industrial equipment, a dead battery will ruin anyone's day. Veratron's VL Flex Intelligent Battery Monitor Kit contains everything needed to deliver real-time battery health and status to the smallest dashboard. It combines two pioneering products, Veratron's award-winning Intelligent Battery Sensor and its revolutionary VL Flex Instrument. All additional components needed for a fast and easy installation are included. The innovative Intelligent Battery Sensor measures and reports voltage, current, and temperature. It also originates additional critical data such as the state of charge and overall battery health. The device works for either a single 12V lead, gel, or AGM battery or a combination of two 12V batteries to a 24V unit. Features: Flex display kit for Battery monitoring 1x Resistive input for Fuel or Fresh Water level Dedicated harness with pushbutton for screen scrolling In the Box: VL Flex 52 IBM Gauge 12V  Intelligent Battery Sensor (IBS) 12 V Battery Pole Adapter M6 Wire Harness 12V IBS 6m 52mm Mounting Spinlock Push Button for Wire Harness Safety instructions *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

85mm (3-3/8") VMH-35S Multifunction Gauge wtih Voltage Dependent (0-5V) Sensor Input The ideal solution for your outboard engine monitoring. Digital sun-readable display with analog inputs and NMEA 2000 converter, the VMH 35-S embeds a high-performance GNSS receiver which makes it the perfect solution for your boat cockpit. The first in its new VMH line of premium marine gauges, the Veratron VMH 35-S is engineered for single inboard or outboard engine applications. Powered by the latest microprocessor, the Veratron VMH 35-S is blazingly fast. Yet even when set at full brightness, it draws a mere 170mA of power—a fraction of what comparably-sized TFT screens use. The VMH 35-S has the capacity to provide 30 types of data including engine, EcoMode pop-up screen, RPMs up to 8000 with a programmable overspeed alarm, tank levels, battery status, GPS, and vessel information. It's easily configured using the embedded on-screen menu and soft-touch buttons. Features: Integrated high-performance GNSS receiver Intelligent Battery Sensor (IBS) port Analog inputs: 1x Resistive /1x 0-5 V / 1x Frequency Stylish black-glass design with brushed stainless-steel ring Front ring: Brushed stainless steel Front lens: Mineral glass Display: Color IBN + 1.44" TFT optically bonded Connectors: Molex MX-150 12 pins / DeviceNet M12 5 pins NMEA 2000 certified with embedded analog gateway Connectivity: NMEA 2000, LIN, EasyLink Technical Specifications: Nominal voltage: 12V Operating voltage: 9-16V Current consumption: ≤ 150 mA (normal mode) Protection class: IP X7 Dimensions: 100 mm (outer) and 85 mm (mounting hole) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

85mm (3-3/8") VMH-35S Multifunction Gauge with Voltage Dependent (0-5V) Sensor Input without GPS The ideal solution for your outboard engine monitoring. Digital sun-readable display with analog inputs and NMEA 2000 converter. The first in its new VMH line of premium marine gauges, the Veratron VMH 35-S is engineered for single inboard or outboard engine applications. Powered by the latest microprocessor, the Veratron VMH 35-S is blazingly fast. Yet even when set at full brightness, it draws a mere 170mA of power—a fraction of what comparably-sized TFT screens use. The VMH 35-S has the capacity to provide 30 types of data including engine, EcoMode pop-up screen, RPMs up to 8000 with a programmable overspeed alarm, tank levels, battery status, and vessel information. It's easily configured using the embedded on-screen menu and soft-touch buttons. Features: Intelligent Battery Sensor (IBS) port Analog inputs: 1x Resistive /1x 0-5 V / 1x Frequency Stylish black-glass design with brushed stainless-steel ring Front ring: Brushed stainless steel Front lens: Mineral glass Display: Color IBN + 1.44" TFT optically bonded Connectors: Molex MX-150 12 pins / DeviceNet M12 5 pins NMEA 2000 certified with embedded analog gateway Technical Specifications: Nominal voltage: 12V Operating voltage: 9-16V Current consumption: ≤ 150 mA (normal mode) Protection class: IP X7 Dimensions: 100 mm (outer) and 85 mm (mounting hole) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.