|
Navigation Kit Plus for Sailboats
Complex boats need a smart solution. And we have it. VDO Marine OceanLink® display is the only product on the market able to interpret CAN, NMEA 2000® and analog signals without any additional external device.
Safety, performance, entertainment. VDO Marine Navigation Kit and Navigation Kit Plus is the solution! Our Navigation Kits will become essential crew members which ensure you top performance in the open sea, even in the most extreme situations.
All in one box All you need is in one box including wiring harness and terminators. All products are REACH and RoHS compliant and NMEA 2000® certified.
NAVSENSOR (INCLUDED ONLY IN THE KIT NAVIGATION PLUS)
The multifunctional AcquaLink™ NavSensor offers an inertial sensor with a GNSS receiver module to provide the accurate readings of speed of travel as well as pitch & roll. Compass readings can be displayed electronically thanks to the embedded Fluxgate compass, which also facilitate course corrections in electronic autopilots. The barometer and air temperature sensors are early indicators of forthcoming weather conditions.
Navigation Kit Plus includes:
1x OceanLink 4.3 TFT Display/Gateway - Black
1x NMEA 2000 Wind Sensor
1x Nav Sensor
1x Triducer Airmar Sensor (Speed/Depth/Water Temp)
1x 30m NMEA 2000 backbone (mast) cable
3x 6m NMEA 2000 drop cable
1x NMEA 2000 terminator (female)
1x NMEA 2000 terminator (inline)
3x NMEA 2000 T-splitter
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1715.99 |
|
|
Navigation Kit for Sail, Wind Sensor, Transducer, Display & Cables
Complex boats need a smart solution. And we have it. VDO Marine OceanLink® display is the only product on the market able to interpret CAN, NMEA 2000® and analog signals without any additional external device.
Safety, performance, entertainment. VDO Marine Navigation Kit and Navigation Kit Plus is the solution! Our Navigation Kits will become essential crew members which ensure you top performance in the open sea, even in the most extreme situations.
All in one box All you need is in one box including wiring harness and terminators. All products are REACH and RoHS compliant and NMEA 2000® certified.
Navigation Kit Plus includes:
1x OceanLink 4.3 TFT Display/Gateway - Black
1x NMEA 2000 Wind Sensor
1x NMEA 2000 Triducer Airmar Sensor (Speed/Depth/Water Temp)
1x 30m NMEA 2000 backbone (mast) cable
1x 6m NMEA 2000 drop cable
1x NMEA 2000 terminator (female)
1x NMEA 2000 terminator (inline)
2x NMEA 2000 T-splitter
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1555.94 |
|
|
SS 1-14 Threaded Insert f/Spreader Kits Recommended f/4' & Taller Antennas
The stainless steel 1-14 threaded insert is for Seaview Spreader Kits. Replaces the factory plastic 1-14 threaded insert if you plan on using 4' or taller fiberglass antennas.
|
57.60 |
|
|
GO GPS PLUS Receiver
All your boat’s data is close to your fingertips. Veratron GO is NMEA 2000® certified and features an integrated GPS/GLONASS/GALILEO receiver. Compact and easy to install, it does not require any additional protection against harsh weather conditions. One of the smallest GPS receivers available.
The Veratron GO GPS Receiver works in conjunction with the Veratron Go Data.
The "Plus+" variant expands the device with a Bluetooth Low Energy interface which allows you to visualize all the vessel data on your portable devices like smartphones or tablets.
Features:
72 channel receiver
Fast cold-start position fix
Compatible with OceanLink 52MM Bezels
10Hz update rate
Up to 3 concurrent GNSS systems (GPS, GLONASS, and GALILEO)
SBAS – WAAS/EGNOS/MSAS/GAGAN supported
NMEA 2000 standard PGNs transmitted for position, time, speed, and heading
Front-end SAW band-pass filter for enhanced immunity against electrical noise
Interchangeable bezel option
Technical Specifications:
Update Rate: Up to 10Hz using concurrent GNSS, up to 18Hz using single GNSS
Position Fix Time: 26 second cold-start, 1 second hot start
Tracking Sensitivity: -165dBm
Position Accuracy: 2.5m
Velocity Accuracy: 0.05m/s
Heading Accuracy: 0.3°
Water Resistance: IPX7
Dimensions (D x H): 60.7 mm x 18.9 mm
Power Source: NMEA 2000 backbone (12V nominal voltage), no external power supply required
Power Consumption: 100mA (2 LEN) operational, 150mA (3 LEN) during startup
In the Box:
GO GPS Plus Receiver
Instructions Manual
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
217.72 |
|
|
Shakespeare Squatty Body®
Style 5215-AIS
3' (0.9m) VHF Marine Band 3dB
End-fed 1/2-wave stainless steel whip
Sailboat owners will love this version of their longtime favorite, our Style 5215. Its the same light weight, low-profile, stainless steel antenna, specially designed for masthead mounting and built with extra bandwidth for all popular AIS transceivers.
Sealed, tin-plated copper wire coil
Designed specifically for AIS transceivers
SO-239 connector
Stainless steel L-shaped bracket supplied for mounting
One section
For AIS applications
Best applications include: Sailboats
Shakespeare 5215-AIS Squatty Body® Specifications
Band: VHF Marine Band
Antenna Gain: 3dB
Max. Input Power: 50 watts
SWR: nominally 1.5:1 at 162 MHz
Bandwidth: 7 MHz within 2.0:1 VSWR
Ferrule: L-bracket and retaining nut, SO-239 connector
Polarity: Vertical
Impedance: 50 Ohms
DC Ground: No DC Ground - The antenna will read open on continuity test.
Shakespeare Limited Warranty: 2 years
|
71.48 |
|
|
Rudder Angle Sensor f/ Single Station
Technical Specifications:
Measurement Range - 45° - 0 - 45°
Signal Analogue - 3 - 180 Ohm
Resistance value - 3 - 180 Ohm
Operating Voltage - 6 - 24 Volt DC
Communication - Analog
Wire - 2 Wire system
Sensor Signal - Insulated Return
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
80.88 |
|
|
Rudder Angle Sensor f/ Dual Station
Technical Specifications:
Measurement Range - 45° - 0 - 45°
Signal Analogue - 1.5 - 90 Ohm
Resistance value - 1.5 - 90 Ohm - 2 Gauges
Operating Voltage - 6 - 24 Volt DC
Communication - Analog
Wire - 2 Wire system
Sensor Signal - Insulated Return
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
109.40 |
|
|
Bus Termination Resistor for OceanLink® & AcquaLink® Gauges
VDO Marine Bus Termination Resistor.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
32.72 |
|
|
Stanchion Kit Predrilled for GP1300, GP1400 Series InstrumentPods, GP1500, GP1600 & GP1040 Series SystemPods & GP1800 Series SailPods
SK11 Stanchion Kit is used for mounting GP1300, GP1400 Series InstrumentPods, GP1500, GP1600 and GP1040 Series SystemPods and GP1800 Series SailPods. It measures 11″ inch high, 1.25″ diameter stainless steel tube, predrilled to accommodate above listed products. The SK11 Stanchion Kit can be combined with most InstrumentPods or SystemPods and some SailPods for a very strong and sturdy mounting system. Great for on dash mounting on Powerboats or extending the available dash space on the flybridge. Can be used for overhead mounting as well. However, if interest in overhead mounting see SK125, SK129, or SK130 Stanchion Kits. Useful for unique mounting locations in the cockpit on Sailboats. Two 1.25″ stainless steel strait tubes. Includes pair of round stainless steel feet. They are polished and predrilled to easily fit together with the NavPod. Wires can be routed down both tubes and are all concealed for a very clean installation.
Navpod sold separately
|
174.53 |
|
|
Sealing Kit for Water Level Sensors
Replacement kit for water sensors.
In the Box:
Gaskets x 2
Allen bolts
Allen key
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
52.99 |
|
|
Sealing Kit for Water Capacitive Sensor
Sealing Kit for Fresh Water Level Sensor.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
15.59 |
|
|
Sealing Kit for Fresh Water Resistive Sensor
Sealing Kit specifically for Fresh Water Resistive Sensor.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
37.40 |
|
|
Installation Kit for Deep-Pipe Level Sensors
Replacement kit for parts sold with Deep-Pipe Level Sensors.
In the Box:
Stainless Steel Top Flange
Bottom Threaded Flange
Rubber Gasket x 2
Washers x 5
Screws x 5
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
9.97 |
|
|
Power & Data Cable f/ OceanLink Master TFT - Engine # 1
Replacement Power and Data Input Signal Harness used for Engine 1 connector on OceanLink 7” Display
Features:
Power & Data Cable for Master TFT Displays
Cable length - .5M (1.6')
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
21.50 |
|
|
Bus Gender Changer for AcquaLink® Gauges
VDO Marine Bus Gender Changer.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
32.72 |
|