|
Non-Powered Handset Cradle for Cortex H1 Tethered & H1P Portable Handset
Mount your handset anywhere on the boat with the non-powered handset cradle. The cradle has a two-piece design hiding the mounting hardware behind the snap cover leaving you with a clean sleek design on the helm or bulkhead. Pair with a RAILBLAZA or RAM Mount style adapter to use with your favorite mounting solution. The non-powered handset cradle can be used with either the H1(tethered) or H1P (portable) handsets.
|
22.49 |
|
|
Charging Handset Cradle for Cortex H1P Portable Handset
Mount your H1P (portable) handset anywhere on the boat where 12-24vDC can be reached. The cradle has a two-piece design hiding the mounting hardware behind the snap cover leaving you with a clean sleek design on the helm or bulkhead. The charging connectors are gold-plated preparing for the elements and suitable for mounting outdoors.
|
31.49 |
|
|
Cortex H1 Tethered Handset with Non-Powered Cradle
For the ultimate safety, add a battery-powered rechargeable handset to your Cortex. Have situational awareness and VHF communication at your fingertips, no matter where you are on your boat.
A revolution in marine technology that will change your VHF experience forever. An intuitive touchscreen that is engineered for durability to withstand the rigors of the harsh marine environment. Audio that’s as loud as a train but clear as a bell. The future of VHF is here.
Features:
An experience so intuitive
Secure Handset Mounting and Charging Cradle
One-touch DSC
Handsets like no other
Wireless freedom
Up to 85dBA audio
Wide-angle, sunlight viewable
Pinch-to-zoom
Critical data is always in view
Durability in wet and rough conditions
Gorilla Glass
Wet use touchscreen
Specifications:
Size: 164.8 mm x 71.8 mm x 21.4 mm (6.4882” x 2.8268” x 0.8425”)
Power Supply: 12V, 1A max, 200mA nominal, 12 -24V compatible
Battery: Lithium Polymer, 2 hour full charge, >12 hours nominal operation
Weight: 235g
Environmental: Waterproof (IPX7)
Operating Temperature: -25°C to +55°C (-13°F to 131°F)
Audio: 3W Class D amplifier, THD < 5% @ 85dBA
Display:
Screen: LCD TFT Si, 640 x 800, 24bit Color
Touch: Capacitive, optically bonded to LCD. Glove and salt water operable
Backlight: 600 cd/m2
Ambient light sensor for auto dimming
|
779.99 |
|
|
Bulkhead Connector Kit for Cortex H1
Adding a station for your Cortex H1 is as easy as mounting the bulkhead connector kit and connecting it to 12-24 VDC.
|
22.49 |
|
|
Cortex H1P Portable/Wireless/Rechargeable Handset with Charging Cradle
For the ultimate safety, add a battery-powered rechargeable handset to your Cortex. Have situational awareness and VHF communication at your fingertips, no matter where you are on your boat.
Features:
Rechargeable, the portable battery-powered handset for connection to Cortex M1
4-inch multi-touch display with gorilla glass for maximum durability
Single hand operation with the unique click wheel and dedicated buttons
Wet and gloves capable touchscreen
Optically bonded display for wide-angle and sunlight viewability, even in the harshest midday sun.
85 dBA of crystal-clear audio
Combined AIS and VHF display with voiced alerts
Touch a vessel onscreen for direct calling (DSC)
Add 10 handsets to Cortex M1
What's In The Box?
H1P Portable Rechargeable Handset
Charging H1P Cradle
Non-Powered H1 Cradle
Specifications:
Size: 164.8 mm x 71.8 mm x 21.4 mm (6.4882” x 2.8268” x 0.8425”)
Power Supply: 12V, 1A max, 200mA nominal, 12 -24V compatible
Battery: Lithium Polymer, 2 hour full charge, >12 hours nominal operation
Weight: 235g
Environmental: Waterproof (IPX7)
Operating Temperature: -25°C to +55°C (-13°F to 131°F)
Audio: 3W Class D amplifier, THD < 5% @ 85dBA
Display:
Screen: LCD TFT Si, 640 x 800, 24bit Color
Touch: Capacitive, optically bonded to LCD. Glove and salt water operable
Backlight: 600 cd/m2
Ambient light sensor for auto dimming
|
779.99 |
|
|
External Weatherproof Single Speaker for Cortex M1
Vesper’s External Weatherproof Speaker is designed for the marine environment. With IP66 ingress protection, they are suitable for mounting almost anywhere onboard. Compact in size, this speaker features heavy-duty molded plastic housing.
Features:
3” 70 Watt Speaker
Frequency response of 80Hz-18Khz
4 Ohms impedance
UV resistant polymer housing
IP66 water-resistant for marine applications
Polypropylene cone
Heavy-duty molded ABS plastic basket and grill construction
Rear plastic water guard housing protects magnet and internal components
Surface installation 75mm (2 1/8”) cut out
Supplied with 2m (6.5ft) or cable
Single speaker
|
31.49 |
|
|
Replacement External WiFi Antenna for Cortex M1
Replacement WiFi antenna for the Cortex V1 & M1. Increase the WiFi range from the M1 (Cortex hub) by installing the external WiFi antenna. The external WiFi antenna comes included with the Cortex M1 or V1. Additionally, the WiFi range can be extended with most third-party 2.4GHz, 802.11b/g/n WiFi boosters.
|
17.99 |
|
|
Cellular Low Loss Cable for Cortex - 5M (16')
Replacement 5M (16’) coaxial cable for the Cortex GPA680 external cellular antenna. RG58 coaxial cable with SMA connectors and supplied with heat shrink to seal the connection to the antenna pigtail.
|
17.99 |
|
|
Splitter Patch 2M Cable for Cortex M1 to External VHF
2M RG58 Coaxial Splitter Patch Cable (BNC to PL259) to connect an external VHF radio to the Cortex M1.
|
17.99 |
|
|
Power Cable for Cortex - 6'
Replacement 6’ Power Cable for the Cortex M1 & V1.
|
26.99 |
|
|
RAM EZ-ROLL'R Cradle f/Apple iPad mini WITHOUT CASE, SKIN OR SLEEVE
The EZ-ROLL'R consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle.
The EZ-ROLL'R cradle is compatible with the following tablets:
Apple iPad mini WITHOUT CASE, SKIN OR SLEEVE
Specifications:
Docking Cradle: No
Locking Cradle: No
Fits Tablets WITH Cases: No
Fits Tablets WITHOUT Cases: Yes
Low Vibration Environment: Yes
High Vibration Environment: Yes
Cradle Features:
1. Compatible with various iPad cable/docking accessories
2. Patent pending roller design for super smooth placement and removal of the iPad
3. High strength materials maximize longevity of cradle
4. Full access to all ports
5. Lifetime warranty
Material:
High Strength Composite
|
14.36 |
|
|
RAM Tab-Tite Universal Clamping Cradle f/Apple iPad w/LifeProof & Lifedge Cases
The RAM-HOL-TAB17U consists of a spring loaded back plate and custom support cups for 10" screen tablets WITH heavy duty cases. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB17U is just what you need to get the most out of your tablet.
The RAM Tab-Tite cradle is compatible with the following tablets:
10" Screen Tablets with LifeProof nüüd cases
10" Screen Tablets with Lifedge cases
10" Screen Tablets with heavy duty cases
The Tab-Tite cradle is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
Tab-Tite Cradle Dimensions:
Height: 8.75" minimum to 10.75" maximum
Width: maximum to 8.25"
Depth: maximum to 1.1"
Tab-Tite Cradle Features:
1. Support cups contain open slots to accommodate for tablets of various sizes
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded cradle allows for quick release of your tablet
5. High strength materials maximize longevity of cradle
6. Full access to all ports
7. Lifetime warranty
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
27.61 |
|
|
Double Twist-Lock™ Suction Cup Mount w/Tab-Tite™ Universal Spring Loaded Cradle f/Apple iPad 1-4 with or without Light Duty Case
The RAM-B-189-TAB3U consists of a double 3.3" twist lock suction cup base, double socket arm, round base adapter and Tab-Tite™ universal clamping cradle. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The spring loaded Tab-Tite™ cradle makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended.
The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
Cradle Dimensions:
Height: 8.5" to 11.125"
Width: 6.38" to 7.75"
Depth: 0.13" to 0.56"
Features:
1. Support cups contain open slots to accommodate for tablets of various sizes
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded cradle allows for quick release of your tablet
5. High strength materials maximize longevity of cradle
6. Full access to all ports
7. Lifetime warranty
8. Made in the U.S.A.
Material:
High Strength Composite & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
Weight:
1.8 lbs.
|
79.37 |
|
|
RAM Tab-Tite Universal Clamping Cradle f/Google Nexus 7 w/ or w/o Light Duty Sleeve
The RAM-HOL-TAB18U consists of a spring loaded back plate and custom support cups for the Google Nexus 7 WITH OR WITHOUT LIGHT DUTY SLEEVE. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB18U is just what you need to get the most out of your tablet.
The RAM Tab-Tite cradle is compatible with the following tablets:
Google Nexus 7 WITH OR WITHOUT LIGHT DUTY SLEEVE
The Tab-Tite cradle is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
Tab-Tite Cradle Dimensions:
Height: 7" minimum to 8.875" maximum
Width: maximum to 4.7"
Depth: maximum to 0.43"
Tab-Tite Cradle Features:
1. Support cups contain open slots to accommodate for tablets of various sizes
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded cradle allows for quick release of your tablet
5. High strength materials maximize longevity of cradle
6. Full access to all ports
7. Lifetime warranty
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.
|
25.18 |
|
|
RAM EZ-ROLL'R Cradle f/SPOT Gen3
This RAM high strength composite cradle is designed to hold the following devices:
SPOT Gen3
Features:
Open access to all electronic ports
Patented roller design for super smooth placement and removal of the SPOT Gen3
Form fitted cradle supports and protects device without vibration
High strength materials ensure product longevity
Lifetime warranty
Made in the U.S.A.
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.
|
12.38 |
|