Cellular Low Loss Cable for Cortex - 5M (16') Replacement 5M (16’) coaxial cable for the Cortex GPA680 external cellular antenna. RG58 coaxial cable with SMA connectors and supplied with heat shrink to seal the connection to the antenna pigtail.

Splitter Patch 2M Cable for Cortex M1 to External VHF 2M RG58 Coaxial Splitter Patch Cable (BNC to PL259) to connect an external VHF radio to the Cortex M1.

Power Cable f/Dragonfly 5M - 1.5M 1.5M power cable for Dragonfly 5M For use with Dragonfly 5M only.

GPS Low Loss Patch 10M (33') Cable for Cortex Replacement 10M (33’) coaxial cable for the Cortex GPA762 GPS antenna. RG58 coaxial cable with SMA connectors and supplied with heat shrink to seal the connection to the antenna.

External GPS Antenna with 8" Cable for Cortex M1 & 10M Coax Cable External GPS Antenna for Cortex M1 with 8" (200mm) cable. This multi-constellation GNSS Antenna is designed as an external antenna for the Cortex Hub, WatchMate Vision, or XB series of AIS transponders . It is IP67 and UV stable for use in a harsh marine environment. GNSS (Global Navigation Satellite System) includes GPS, GLONASS, Bei Dou and Gallileo positioning networks. Features: Small SMA connector for easy installation Pre-wired 200mm (8”) RF cable for easy servicing Two mounting configurations (deck or under deck) UV stable housing provides good color stability Specifications: UV stable plastic with a zinc-plated alloy base Dimensions: 60mm x 19mm Loom: 200mm Color: White Mounting: Bulkhead, pole, deck, and underdeck mounting

Antenna Cable for Cortex® V1 & M1 Use this 32 ft cable to connect your antenna to your compatible Cortex VHF and AIS. Features: Cable fitted for Cortex® V1 & M1 32' cable

Power Cable for Cortex - 6' Replacement 6’ Power Cable for the Cortex M1 & V1.

Fist Mic Extension Cable for RS40 5M (16.5') Fist Mic Extension Cable for RS40

Communication Cable for SG200 - 5M Balmar's communication cable specifically for the SG200. 5 Meters in length. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

External Cellular Antenna with 5M (16') Cable & Mounts for Cortex M1 Extend the range of the remote monitoring by adding an external cellular antenna. The M1 Cortex transponder/hub includes a built-in cellular antenna however to increase the cellular range you can add this external antenna giving the antenna a clear view of the sky. The GPA680 comes with an antenna, 5M (16') cable, and mounts.

External Weatherproof Single Speaker for Cortex M1  Vesper’s External Weatherproof Speaker is designed for the marine environment. With IP66 ingress protection, they are suitable for mounting almost anywhere onboard. Compact in size, this speaker features heavy-duty molded plastic housing. Features: 3” 70 Watt Speaker Frequency response of 80Hz-18Khz 4 Ohms impedance UV resistant polymer housing IP66 water-resistant for marine applications Polypropylene cone Heavy-duty molded ABS plastic basket and grill construction Rear plastic water guard housing protects magnet and internal components Surface installation 75mm (2 1/8”) cut out  Supplied with 2m (6.5ft) or cable Single speaker

Replacement External WiFi Antenna for Cortex M1 Replacement WiFi antenna for the Cortex V1 & M1. Increase the WiFi range from the M1 (Cortex hub) by installing the external WiFi antenna. The external WiFi antenna comes included with the Cortex M1 or V1. Additionally, the WiFi range can be extended with most third-party 2.4GHz, 802.11b/g/n WiFi boosters.

4' Cellular Antenna Digital Antenna's 1100 series antennas with a collet ferrule ensure no cable twisting and allows the antenna to be removed when needed. This new technique allows the use of existing coax or a new run of premium low loss cable. A taperedcollet securely locks Digital Antenna's 1100 series antenna to the bottom ferrule which mounts standard 1"-14 threads. All marine antennas are manufactured in the USA with 316 surgical stainless, UV stable high gloss finish and precision soldered components. Features: Sleek, rugged design Locking collett allows antenna to be attached without twisting cable Large connector pass thru Mounts to standard 1"-14 mount or mount with U-bolt to a pole This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Non-Powered Handset Cradle for Cortex H1 Tethered & H1P Portable Handset Mount your handset anywhere on the boat with the non-powered handset cradle. The cradle has a two-piece design hiding the mounting hardware behind the snap cover leaving you with a clean sleek design on the helm or bulkhead. Pair with a RAILBLAZA or RAM Mount style adapter to use with your favorite mounting solution. The non-powered handset cradle can be used with either the H1(tethered) or H1P (portable) handsets.

Waterproof USB Cable - 5M (16') USB cable for the AISWatchMate 850, AISWatchMate Vision, and XB-8000 transponders 5M (16') USB cable with a waterproof connector that twists locks into the USB socket on a Vesper Marine transponder and has a standard PC USB connector for your laptop. Because it locks into place it won't fall out due to vibration or shock. Features: 1 x Waterproof mini connector (IPx7 rated) 1 x Standard USB-A PC connector 5M (16') in length