Triple Rod Holder - 30° Bent Butt Much like our double rod holder, the fisherman now has three options from one holder. It has a solid weld construction, bent butt and is made from high quality aluminum. Like the old saying goes, "the third line's the charm"!

Offset Triple Rod Holder Offset Kite Cluster Rod Holder

Triple Rod Holders Scotty's multiple rod holder comes with a built-in lur and accessory rack, which give you quick access to your lures and tools No. 362 Triple rod holder permanent mount board only

Triple Rod Holders Scotty's fully-adjustable multiple rod holder comes with a built-in lure and accessory rack, which gives you quick access to your lures and tools. Includes No. 241 combination deck or side mount. Made from fibre reinforced engineering nylon. Includes 3 No. 230 Power Lock rod holders WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Triple Rod Holders Scotty's fully-adjustable multiple rod holder comes with a built-in lure and accessory rack, which gives you quick access to your lures and tools. Includes No. 241 combination deck or side mount. Made from fibre reinforced engineering nylon. Triple Rod Holder Mount Includes Mounting bracket WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Offset Triple Rod Holder w/Cup Holders - Port Side - Polished Aluminum Features: This quality rod holder can be used for rod storage and is most useful in kite fishing Cups allow for holding rigging tools as well as a drink Constructed of anodized aluminum and white liner to protect rods

Offset Triple Rod Holder with Cup Holders - Starboard Side - Polished Aluminum Features: This quality rod holder can be used for rod storage and is most useful in kite fishing Cups allow for holding rigging tools as well as a drink Constructed of anodized aluminum and white liner to protect rods

Triple Rod Holder w/Cup Holders - Port Side & Starboard Side - Polished Aluminum  Features: This quality rod holder can be used for rod storage and is most useful in kite fishing Cups allow for holding rigging tools as well as a drink Constructed of anodized aluminum and white liner to protect rods

70 Series Screwless Flush Mount Rod Holder - 30 Degree - Stainless Steel - Cast Bottom - Black Liner - Boxed These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. Features: 316L stainless steel Fits 2-3/16 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 30 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-5/8 in. Outer Diameter: 2-1/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in.

80 Series Screwless Flush Mount Rod Holder - 30 Degree - Stainless Steel - Cast Bottom - Black Liner These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. Features: 316L stainless steel Fits 2-9/16 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 30 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-7/8 in. Outer Diameter: 2-5/8 in. Cap Size: 5-1/8 in. long x 4-1/4 in. wide Tube Length: 10 in.

70 Series Standard Flush Mount Rod Holder - 30 Degree - Stainless Steel - Gimbal Bar Bottom - Black Liner These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. A built-in gimbal bar on the open bottom allows water to drain and prevents the rod from spinning. Features: 316L stainless steel Fits 2-3/16 in. hole diameter No logo on the cap for a sleek low profile The liner runs the full length of the tube Specifications: Degrees: 30 degrees Bottom Style: Bar Liner Color: Black Inner Diameter: 1-5/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in. Gimbal Bar: ¼ in. wide x ½ in. tall

70 Series Standard Flush Mount Rod Holder - 30 Degree - Stainless Steel - Cast Bottom - Black Liner These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. This model has a durable, rounded cast bottom with a hole to drain water.  Features: 316L stainless steel Fits 2-3/16 in. hole diameter Cast models feature a 1/2 in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Specifications: Degrees: 30 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-5/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in.

80 Series Standard Flush Mount Rod Holder - 30 Degree - Stainless Steel - Cast Bottom - Black Liner These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. This model has a durable, rounded cast bottom with a hole to drain water.  Features: 316L stainless steel Fits 2-1/2 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Specifications: Degrees: 30 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-7/8 in. Cap Size: 5-1/8 in. long x 4-1/4 in. wide Tube Length: 10-1/2 in.

Oval Head SS Gunnel Mount Rod Holder - 30° - 9" Crafted of 316 Stainless Steel Head Size: 3.28" x 4.06" Length: 9" Angle: 30° Head Inner Diameter: 1-5/8"

Round Head Closed Base Rod Holder - 30° - 9" Heavy duty, round head, closed end base with drain hole to accept 1/4" NPT pipe to hose fitting. Head Size: 3.85" Length: 9" Angle: 30° Head Inner Diameter: 1-5/8"