Double Rod Holder Part #: 105 The double rod holder, with its bent butt and angled rod holders, plus solid weld contruction from 60 series aluminum, gives the fisherman the opportunity to fish two lines from one holder.

Triple Rod Holder - 30° Bent Butt Much like our double rod holder, the fisherman now has three options from one holder. It has a solid weld construction, bent butt and is made from high quality aluminum. Like the old saying goes, "the third line's the charm"!

Double Rod Rigger Part #: 108 The double rod rigger is the new way to fish a rod rigger. We start with a tough 60 series aluminum with the same ability of a traditional rod rigger to fish either starboard or port, and still have the option to fish another line from the stern. Simply put, "Innovation and Fishability"!

ShadeFin with White Fabric, Case & Fixed Rod Holder Mount Kit Add an extra layer of sun protection with ShadeFin by TACO Marine that easily attaches into rod holders, tops and arches for convenient, portable shade for almost any boat. ShadeFin’s ocean-inspired design provides expanded shade coverage for multiple areas of the boat, including fore, aft and sides of tops or anywhere there is a rod holder. ShadeFin’s fabric provides an excellent UPF 50+ rating of sun protection while boating and fishing, or when relaxing at the dock and sand bar. To anticipate the needs of many boaters, ShadeFin is available with either a fixed or adjustable rod holder mount, which inserts into any standard rod holder, or with a clamp-on mount for pipe or tube.  ShadeFin’s body houses the ribs and material, and is offered in all black or white. A protective mesh storage sleeve comes standard with the ShadeFin. To operate ShadeFin, remove the sleeve, mount to a desired location onboard and activate the underside release tabs. Structural ribs attached to weather-resistant sun-protecting fabric expand out from the body to lock the fin in place. ShadeFin is lightweight, portable and requires no drilling. Features: Light, compact and portable Easily mounts into any standard rod holder Kit comes with a Fixed Rod Holder Mount Adjustable Rod Holder Mount options available Clamp-on mounting options available for 3/4”, 1” schedule-40 Pipe and 1-1/4” O.D. tube Large coverage area of 5’ X 6’ UPF (Ultraviolet Protection Factor) rating of 50+ (“Excellent” rating) Made of high-quality anodized aluminum parts

Triple Rod Holders Scotty's fully-adjustable multiple rod holder comes with a built-in lure and accessory rack, which gives you quick access to your lures and tools. Includes No. 241 combination deck or side mount. Made from fibre reinforced engineering nylon. Includes 3 No. 230 Power Lock rod holders WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

290 R-5 Universal Rod Holder w/Mount The R-5 Rod Holder has been designed to securely hold your spincaster, spinning, bait caster, level wind and/or fly rod with up to 15lb test.   The 1/4" Stainless Steel lock bar pivots open to allow a quick effortless release of your rod. Features: Easy adjustable lock bar tension Designed and built to withstand all conditions and backed by the Scotty name In the Box: 290 R-5 rod holder 241 Side deck mount *Sold as an Individual

ShadeFin with Black Fabric, Case & Fixed Rod Holder Mount Kit Add an extra layer of sun protection with ShadeFin by TACO Marine that easily attaches into rod holders, tops and arches for convenient, portable shade for almost any boat. ShadeFin’s ocean-inspired design provides expanded shade coverage for multiple areas of the boat, including fore, aft and sides of tops or anywhere there is a rod holder. ShadeFin’s fabric provides an excellent UPF 50+ rating of sun protection while boating and fishing, or when relaxing at the dock and sand bar. To anticipate the needs of many boaters, ShadeFin is available with either a fixed or adjustable rod holder mount, which inserts into any standard rod holder, or with a clamp-on mount for pipe or tube.  ShadeFin’s body houses the ribs and material, and is offered in all black or white. A protective mesh storage sleeve comes standard with the ShadeFin. To operate ShadeFin, remove the sleeve, mount to a desired location onboard and activate the underside release tabs. Structural ribs attached to weather-resistant sun-protecting fabric expand out from the body to lock the fin in place. ShadeFin is lightweight, portable and requires no drilling. Features: Light, compact and portable Easily mounts into any standard rod holder Kit comes with a Fixed Rod Holder Mount Adjustable Rod Holder Mount options available Clamp-on mounting options available for 3/4”, 1” schedule-40 Pipe and 1-1/4” O.D. tube Large coverage area of 5’ X 6’ UPF (Ultraviolet Protection Factor) rating of 50+ (“Excellent” rating) Made of high-quality anodized aluminum parts

Rod Holder - Medium - 0° - Stainless Steel The choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task.

Rod Holder - Heavy Duty - 0° - Stainless Steel The choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task.

Offset Triple Rod Holder Offset Kite Cluster Rod Holder

Clamp-On Rod Holder - White Aluminum - Vertical Mount - Fits 1.900" O.D. Pipe Color:White Pipe Size:#4 Fits:1.900" O.D. Pipe Mount:Vertical JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.

Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.050" O.D. Pipe Color:Black Pipe Size:#1 Fits:1.050" O.D. Pipe Mount:Horizontal JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.

Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.660" O.D. Pipe Color:Black Pipe Size:#3 Fits:1.660" O.D. Pipe Mount:Horizontal JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.

Aluminum Clamp-on Rod Holders Model:  RA5001GL Color:   Gold Fits:      1.050" O.D. Pipe Mount:  Vertical JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.

Aluminum Clamp-on Rod Holders Model:  RA5004SL Color:   Silver Fits:      1.900" O.D. Pipe Mount:  Vertial JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.