|
Dock 2 Go Modular 6' x 12' Floating Dock Hardware Kit
The Dock 2 Go Modular Dock Kit includes all Heavy Duty Hot Dipped Galvanized mounting hardware required to assemble a 6' x 12' modular floating dock section. Each kit may be utilized to construct a stand-alone dock or may be attached to another Dock 2 Go section using a Dock 2 Go modular connector kit to increase dock length or width as required.
|
313.63 |
|
|
P10 Series
Taco Marine customers can count on King StarBoard Polymer Sheets when it comes to creating new accessories or replacing wood, laminates or plastic parts on boats. The polymer sheet is environmentally stabilized to withstand the harshest marine conditions. It will not warp, rot or delaminate when exposed to humidity or water. It is also easy to fabricate with standard woodworking tools and requires little or no finishing.
Features and Benefits
High density polyethylene
UV-stabilized
Available in full and half sheets
Also available in cut sizes that are individually wrapped for retail merchandising
Withstands all harsh marine environments
Three year limited warranty
Made in USA
Applications
Electronic Boxes
Cup Holders
Shelves
Cabinets
Hatches and Doors
Chart Holders
Table Tops
Rod Holder Racks
Instrument Panels
Tool Holders
Leaning Posts
Bait Wells and Covers
Shower Floors
|
13.73 |
|
|
Marine Grip Tape - 6 x 12" - Translucent White - 6 Pieces
Harken Marine Grip is a thin, reliable, nonabrasive grip tape that is more effective than adhesive alternatives, waxes and other products that reduces slipping. It also stands up to extreme marine conditions on boats, docks and stairs.
The superior grip is simple to install, clean and apply, and is cost-effective. And because it’s nonabrasive, it won’t damage clothing, wetsuits or skin. Harken Marine Grip is nonabsorbent, UV stable and good for all temperatures.
When compared, Harken Marine Grip outgrips other adhesive alternatives and waxes.
|
47.65 |
|
|
Groco As-88-B 6 X 12 #316 Ss Enclosure
|
1363.44 |
|
|
Marine Grip Tape - 6 x 12" - Black - 6 Pieces
Harken Marine Grip is a thin, reliable, nonabrasive grip tape that is more effective than adhesive alternatives, waxes and other products that reduces slipping. It also stands up to extreme marine conditions on boats, docks and stairs.
The superior grip is simple to install, clean and apply, and is cost-effective. And because it’s nonabrasive, it won’t damage clothing, wetsuits or skin. Harken Marine Grip is nonabsorbent, UV stable and good for all temperatures.
When compared, Harken Marine Grip outgrips other adhesive alternatives and waxes.
|
47.65 |
|
|
Marine Grip Tape - 6 x 12" - Grey - 6 Pieces
Harken Marine Grip is a thin, reliable, nonabrasive grip tape that is more effective than adhesive alternatives, waxes and other products that reduces slipping. It also stands up to extreme marine conditions on boats, docks and stairs.
The superior grip is simple to install, clean and apply, and is cost-effective. And because it’s nonabrasive, it won’t damage clothing, wetsuits or skin. Harken Marine Grip is nonabsorbent, UV stable and good for all temperatures.
When compared, Harken Marine Grip outgrips other adhesive alternatives and waxes.
|
47.65 |
|
|
6" x 9" MR692W Speaker - White - 350W
A great sound makes these and designed to withstand the harsh conditions of the marine environment. All frame and grill sections are made of a polymer composite that is completely waterproof with a coating to protect against damage from UV rays.
Cloth surrounds the body and polypropylene cones to complete the waterproof package. The tinsel leads are coated to prevent corrosion and the new updated grille covers are sure to impress.
Features:
Weatherproof construction
Polypropylene woofer cone and treated cloth surround
1" Tweeter dome
Technical Specifications:
Speaker Impedance - 4 ohms
Cone Material - Water-Resistant IMPP
Sensitivity - 92dB
Frequency Response - 60HZ - 20KHZ
Max Power - 350W
175 Watts RMS
Cut-out Dimensions - 8.66"
Mounting Depth - 3.38"
In the Box:
Two (2) - 2 way speakers
Mounting hardware
Instruction manual
*Sold as a Pair
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
75.00 |
|
|
Shortside Door Hinge
Size:1-3/8" x 2-1/4"
Fastener: #10(5)
Material: White Nylon
|
2.29 |
|
|
Package Roller Shaft 1/2" x 12-3/4" with Cap Nuts - Zinc
Roller shafts blister packed each with two cap nuts.
Features:
Length: 12-3/4"
Max Grip: 12.190"
|
6.91 |
|
|
Jabsco X4020-122A O'Ring 1.6 X 22.1 Nitrile
|
6.16 |
|
|
Material: C.P. Brass
Fastener: #10 (4)
Flange: 6-1/8" x 4-3/8"
Inside Diameter: 4" x 2-1/4"
|
61.24 |
|
|
Heavy Duty Lugs - 6 Gauge Wire - 1/4" Post - 2-Pack
Cable Gauge: 6
Screw Size: 1/4"
ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow
100% tin plated copper resists corrosion from salt and moisture
Seamless barrel design allows for maximum strength when crimped
Closed end design seals out moisture so cables stay dry and corrosion free
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
2.90 |
|
|
Heavy Duty Lugs - 6 Gauge Wire - 1/4" Post - 25-Pack
Cable Gauge: 6
Screw Size: 1/4"
ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow
100% tin plated copper resists corrosion from salt and moisture
Seamless barrel design allows for maximum strength when crimped
Closed end design seals out moisture so cables stay dry and corrosion free
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
24.67 |
|
|
Heavy Duty Lugs - 6 Gauge Wire - 1/4" Post - 100-Pack
Cable Gauge: 6
Screw Size: 1/4"
ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow
100% tin plated copper resists corrosion from salt and moisture
Seamless barrel design allows for maximum strength when crimped
Closed end design seals out moisture so cables stay dry and corrosion free
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
70.09 |
|
|
Shortside Door Hinge
Size:1-3/8" x 2-1/4"
Fastener: #10(5)
Material: Black Nylon
|
2.29 |
|