|
iSeaSense Wireless Speed Depth Temp Pack Plus Wind
Digital Yacht iSeaSense is a range of complete marine instrumentation packs based on NMEA 2000 and wireless connectivity. This pack includes speed, depth, temperature transducer plus wind sensor.
Digital Yacht iSeaSense is a range of complete marine instrumentation packs based on NMEA 2000 and wireless connectivity, allowing maximum flexibility and connectivity. Choose from using phones, iPads, and tablets for boat data displays as well as 3rd party industry-standard instruments and multi-function displays.
Operation:
You can access the iSeaSense dashboard through its web interface, just open your web browser, enter the iSeaSense’s IP address or iSeaSense.local and you will access the attractive dash to display all your instrument data. So no complicated programming software or app is required.
By default, iSeaSense has a series of pre-defined pages that display digital databoxes and analog “instruments” of the instrument and navigation data available on the NMEA 2000 network.
With iSeaSense you’re in control of the data you see. The pages are fully editable, so any databox can be configured for the information you want and you can easily add and remove databox to build your perfect display. The configuration can also be saved and shared – ideal for standard configurations for production boats and OEMs.
Key Features:
Top quality and highly accurate sensors are used for boat depth, speed, wind, compass, and GPS data. Data can be shared with other devices on the NMEA 2000 network too.
iSeaSense is easy to specify. Everything is included as two main starter packs for easy installation and ordering. No app is needed either as the iSeaSense wireless server creates powerful graphical and numeric display pages that can be viewed via a browser on any device.
iSeaSense includes the WND100 wind sensor with 20m cable and an interface to “T” directly to the NMEA 2000 backbone. It means there’s no heavy NMEA 2000 cabling to the top of the mast and no need for complex mast top terminations for the Wind Sensor.
iSeaSense also includes depth, speed, and temperature sensors. A spatial sensor is also included for detecting pitch and roll and there’s a sophisticated algorithm for calibrating boat speed information based on heel.
A full NMEA 2000 backbone cabling back the wireless interface for connectivity and a spare cable and connection point for additional NMEA 2000 devices are included.
With NMEA 2000, expanding the system is easy and you can add any Digital Yacht’s instruments such as GPS, AIS, electronic compass, and more. You can also send the instrument data to your NMEA 2000 chart plotter or display.
iSeaSense features an easy-to-use web interface. No apps are required. Simply open the browser on a connected device, navigate to iSeaSense.local, and the optimized touchscreen display is ready.
You can calibrate the wind sensor via the iSeaSense web interface and also displays true and apparent wind speed and angle plus VMG calculations.
The web interface works on iOS, Android, PC, Linux, and MAC – any standard web browser as well as e-ink displays like Kindle and e-book. It supports up to 3 connected devices with super fast 5Hz updates.
The data can also be used by 100 popular navigation apps & software such as Navionics, TZ iBoat, OpenCPN, SailGrib, etc.
iSeaSense Pack Features:
Pack includes iSeaSense wireless server, NMEA 2000 cabling, and advanced boat depth, speed, and temperature transducer with pitch and heel sensor
Pack also includes WND100 mast head wind sensor – adding wind data to the system and network
Easy to install mast head unit with 20m cable and NMEA 2000 interface
iSeaSense server creates beautiful graphic display pages of data with fast 5Hz updates viewable on any smartphone, tablet, or iPad
Advanced calibration routing is available for the transducer with corrections for the boat heel and transducer location
Calibrate the wind sensor via the iSeaSense interface
Includes extra NMEA 2000 T piece for system expansion allowing easy addition of sensors or displays
Interface Features:
NMEA 2000 interface and wireless gateway for iSeaSense system. Integrated instrument display page server.
Configurable display pages for depth, speed, temp, time, GPS, wind, navigation, and compass
Network diagnostics, settings, and calibration capability
Data logging
Self-powered from NMEA 2000 backbone
Integrated wifi antenna typically footprints boats up to 20m
Supports additional TCP/IP and UDP data connections for 3rd party apps on up to 7 connected devices (outputs GPS, AIS, depth, wind, and speed information from NMEA 2000 bus)
Transducer Features:
Transducer for depth, boat speed, water temperature, and boat heel/pitch with fast, super accurate 5Hz speed updates from 0.3 to 45 knot
Data Update Rate: Depth: 1X/second, Speed: 5X/second, Heel/Trim: 10X/second
235KHz depth operation to minimize interference with 50/200KHz fish finders and sounders
Max depth 100m
Supports up to 22-degree hull deadrise
Supplied with 6m NMEA 2000 cable and self-powered from iSeaSense NMEA 2000 backbone
Standard 2” thru hull size/diameter
Includes Bluetooth interface for advanced calibration and set-up features if required
Stainless steel and bronze skin fittings available as an option
Wind Sensor Features:
The WND200 package comprises a WND100 mast head unit plus iKonvert NMEA 0183-2000 interface supporting 5Hz fast wind mode
8-18V power with ultra-low 25mA power consumption
Supplied with 20m ultra thin 4mm masthead cable for easy cable runs through mast (4 core screened)
iKonvert NMEA 2000 interface included for system integration
Wind angle accuracy is better than 4 degrees
Wind speed accuracy better than 3%
Min wind speed 1.7 knots – max 80 knots
Settling time typically 1.3 seconds
|
1255.80 |
|
|
iSeaSense Wireless Speed Depth Temp Pack
Digital Yacht iSeaSense is a new range of complete marine instrumentation packs based on NMEA 2000 and wireless connectivity – allowing for maximum flexibility and connectivity. Choose from using phones, iPads, and tablets for boat data displays as well as 3rd party industry-standard instruments and multi-function displays.
Top quality and highly accurate sensors are used for boat depth, speed, compass, and GPS data. Data can be shared with other devices on the NMEA 2000 network too.
iSeaSense is easy to specify. Available as two main starter packs, everything is included for easy installation and ordering. No app is needed either as the iSeaSense wireless server creates powerful graphical and numeric display pages that can be viewed via a browser on any device.
iSeaSense Pack 1 is a comprehensive boat depth, speed, and temperature pack. A spatial sensor is also included for detecting pitch and roll and there’s a sophisticated algorithm for calibrating boat speed information based on heel.
A full NMEA 2000 backbone cabling pack is included and the wireless interface for connectivity. There is a spare cable and connection point for additional NMEA 2000 devices such as a multi-function display or Digital Yacht’s range of instruments.
iSeaSense features an easy-to-use web interface. No apps are required. Simply open the browser on a connected device, navigate to iSeaSense.local, and the optimized touchscreen display is ready.
The web interface works on iOS, Android, PC, Linux, and MAC – any standard web browser as well as e-ink displays like Kindle and e-book. It supports up to 3 connected devices with super fast 5Hz updates.
The data can also be used by 100’s popular navigation apps & software such as Navionics, TZ iBoat, OpenCPN, SailGrib, etc.
Operation
You can access the iSeaSense dashboard through its own web interface, just open your web browser, enter the iSeaSense’s IP address or iSeaSense.local and you will access the attractive dash to display all your instrument's data. So no complicated programming software or app is required.
By default, iSeaSense has a series of pre-defined pages that display digital databoxes and analog “instruments” of the instrument and navigation data available on the NMEA 2000 network.
With iSeaSense you’re in control of the data you see. The pages are fully editable, so any databox can be configured for the information you want and you can easily add and remove databox to build your perfect display. The configuration can also be saved and shared – ideal for standard configurations for production boats and OEMs.
iSeaSense Pack Features:
Pack includes iSeaSense wireless server, NMEA 2000 cabling, and advanced boat depth, speed, and temperature transducer with pitch and heel sensor
iSeaSense server creates beautiful graphic display pages of data with fast 5Hz updates viewable on any smartphone, tablet, or iPad
Advanced calibration routing is available for the transducer with corrections for the boat heel and transducer location
Includes extra NMEA 2000 T piece for system expansion allowing easy addition of sensors or displays
Interface Features:
NMEA 2000 interface and wireless gateway for iSeaSense system. Integrated instrument display page server.
Configurable display pages for depth, speed, temp, time, GPS, wind, navigation, and compass
Network diagnostics, settings, and calibration capability
Data logging
Self-powered from NMEA 2000 backbone
Integrated wifi antenna typically footprints boats up to 20m
Supports additional TCP/IP and UDP data connections for 3rd party apps on up to 7 connected devices (outputs GPS, AIS, depth, wind, and speed information from NMEA 2000 bus)
Transducer Features:
Transducer for depth, boat speed, water temperature, and boat heel/pitch with fast, super accurate 5Hz speed updates from 0.3 to 45 knot
Data Update Rate: Depth: 1X/second, Speed: 5X/second, Heel/Trim: 10X/second
235KHz depth operation to minimize interference with 50/200KHz fish finders and sounders
Max depth 100m
Supports up to 22-degree hull deadrise
Supplied with 6m NMEA 2000 cable and self-powered from iSeaSense NMEA 2000 backbone
Standard 2” thru hull size/diameter
Includes Bluetooth interface for advanced calibration and set-up features if required
Stainless steel and bronze skin fittings available as an option
|
705.55 |
|
|
i50/i60 Wind, Speed, Depth System Pack with Transducers
Includes:
E70058 - i50 Speed Instrument
E70673 - ST900/P120 S/T Thru Hull - 13.7m Cable
E70059 - i50 Depth Instrument
M78713-PZ - P319 LP Thru Hull Depth Transducer
E70061 - i60 Analogue Wind Instrument
E22078 - Short Arm Wind Transducer
i60 SeaTalkng Instruments
The i60 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance, and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i60 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCDs, and red backlighting for outstanding visibility in all lighting conditions. i60 Analog Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD, and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match our instruments and multifunction displays.
For the ultimate in flexibility, the i60 Instruments support SeaTalkng 0 CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed, and wind transducers directly to the respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours.
The ultra-sleek design of the i60 line is designed to complement our full line of a-Series, c-Series, and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument comes with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately.
i60 Instruments are designed to operate from 12V DC power and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i60 Instruments are waterproof to IPX6 standards. The i60 instruments are all covered by Raymarine's industry-leading 2-year warranty, upgradeable to 3 years at no charge by registering online within 90 days of purchase.
i60 Wind Instrument with Windvane Transducer
Full-featured wind display for cruising and racing sailboats. The i60 Wind features an easy-to-read analog dial, nighttime red backlighting, and high-contrast text and graphics.
Short arm vane supplied with 30m (97.5') cable
Compatible with Raymarine's masthead transducer (recommended for sailboats)
Displays wind speed, direction, Beaufort, max wind speed, VMG, and tack
Alarms for high and low apparent wind angle, low true wind speed, and maximum true wind speed
Apparent wind display and True wind when integrated with a compass or autopilot, and speed instrument
i60 Features:
Ultra-modern design complements Raymarine's latest a-Series, c-Series, and e-Series Multifunction display and instrument systems
Large, crisp LCDs with high contrast for excellent visibility
Red backlighting for outstanding night-time visibility
SeaTalkng and SeaTalk-1 Networking for maximum flexibility
Fully compatible with i70, p70 and p70R Color Instruments and Autopilots
110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy
i50 SeaTalkng Instruments
The i50 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance, and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i50 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCDs, and red backlighting for outstanding visibility in all lighting conditions. i50 Digital Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD, and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match our instruments and multifunction displays.
For the ultimate in flexibility, the i50 Instruments support SeaTalkng 0 CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed, and wind transducers directly to the respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours.
The ultra-sleek design of the i50 line is designed to complement our full line of a-Series, c-Series, and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument comes with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately.
i50 Instruments are designed to operate from 12V DC power and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i50 Instruments are waterproof to IPX6 standards. The i50 instruments are all covered by Raymarine's industry-leading 2-year warranty, upgradeable to 3 years at no charge by registering online within 90 days of purchase.
i50 Speed Instrument
The i50 Speed Instrument offers easy-to-read displays of boat speed through water, GPS speed over ground (SOG), velocity made good (VMG), average speed, and max speed, distance log, trip log, and water temperature. i50 Speed also includes a count-up timer and 2 race-start timers.
Red backlighting for outstanding night-time visibility.
SeaTalkng and SeaTalk-1 connectivity for maximum flexibility
Connect additional i50 speed displays
Built-in speed transducer connection
i50 Depth Instrument
The i50 Depth Instrument offers accurate and reliable displays of depth, max depth, and minimum depth. Shallow and deep depth alarms will keep you alert, along with a shallow and deep anchor alarm.
Red backlighting for outstanding night-time visibility.
SeaTalkng and SeaTalk-1 connectivity for maximum flexibility
Connect additional i50 depth displays
Built-in depth transducer connection
i50 Features:
Ultra-modern design complements Raymarine's latest a-Series, c-Series, and e-Series Multifunction display and instrument systems.
Large, crisp LCDs with high contrast for excellent visibility.
Red backlighting for outstanding night-time visibility.
SeaTalkng and SeaTalk-1 Networking for maximum flexibility.
Fully compatible with i70, p70, and p70R Color Instruments and Autopilots.
110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy
|
1509.66 |
|
|
i50/i60 Wind/Speed/Depth System Package
Includes:
i50 Depth - E70148
i50 Speed - E70147
i60 Wind - E70150
i60 SeaTalkng Instruments
The all-new i60 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i60 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCD displays and red backlighting for outstanding visibility in all lighting conditions. i60 Analog Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match with our instruments and multifunction displays.
For the ultimate in flexibility the i60 Instruments support SeaTalkng 0 CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed and wind transducers directly to respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours.
The ultra-sleek design of i60 line is designed to complement our full line of a-Series, c-Series and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument comes with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately.
i60 Instruments are designed to operate from 12V DC power, and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i60 Instruments are waterproof to IPX6 standards. The i60 instruments are all covered by Raymarine's industry leading 2-year warranty, upgradeable to 3-years at no charge by registering online with 90 days of purchase.
i60 Wind Instrument w/Windvane Transducer
Full featured wind display for cruising and racing sailboats. The i60 Wind features an easy-to-read analog dial, nighttime red backlighting and high-contrast text and graphics.
Short arm vane supplied with 30m (97.5') cable
Compatible with Raymarine's masthead transducer (recommend for sailboats)
Displays wind speed, direction, Beaufort, max wind speed, VMG, and tack
Alarms for high and low apparent wind angle, low true wind speed, and maximum true wind speed
Apparent wind display and True wind when integrated with a compass or autopilot, and speed instrument
i60 Key Features
Ultra-modern design complements Raymarine's latest a-Series, c-Series and e-Series Multifunction display and instrument systems
Large, crisp LCD displays with high contrast for excellent visibility
Red backlighting for outstanding night-time visibility
SeaTalkng and SeaTalk-1 Networking for maximum flexibility
Fully compatible with i70, p70 and p70R Color Instruments and Autopilots
110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy
i50 SeaTalkng Instruments
The all-new i50 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i50 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCD displays and red backlighting for outstanding visibility in all lighting conditions. i50 Digital Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match with our instruments and multifunction displays.
For the ultimate in flexibility the i50 Instruments support SeaTalkng 0 CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed and wind transducers directly to respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours.
The ultra-sleek design of i50 line is designed to complement our full line of a-Series, c-Series and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument comes with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately.
i50 Instruments are designed to operate from 12V DC power, and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i50 Instruments are waterproof to IPX6 standards. The i50 instruments are all covered by Raymarine's industry leading 2-year warranty, upgradeable to 3-years at no charge by registering online with 90 days of purchase.
i50 Speed Instrument
The i50 Depth Instrument offers easy-to-read displays of boat speed through water, GPS speed over ground (SOG), velocity made good (VMG), average speed, and max speed, distance log, trip log, and water temperature. i50 Speed also includes a count up timer, and 2 race-start timers.
Red backlighting for outstanding night-time visibility.
SeaTalkng and SeaTalk-1 connectivity for maximum flexibility
Connect additional i50 speed displays
Built-in speed transducer connection
i50 Depth Instrument
The i50 Depth Instrument offers accurate and reliable displays of depth, max depth and minimum depth. Shallow and deep depth alarms will keep you alert, along with a shallow and deep anchor alarms.
Red backlighting for outstanding night-time visibility.
SeaTalkng and SeaTalk-1 connectivity for maximum flexibility
Connect additional i50 depth displays
Built-in depth transducer connection
i50 Key Features
Ultra-modern design complements Raymarine's latest a-Series, c-Series and e-Series Multifunction display and instrument systems.
Large, crisp LCD displays with high contrast for excellent visibility.
Red backlighting for outstanding night-time visibility.
SeaTalkng and SeaTalk-1 Networking for maximum flexibility.
Fully compatible with i70, p70 and p70R Color Instruments and Autopilots.
110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy
|
1388.28 |
|
|
Tacktick Speed & Depth System
Package Contains:
T111 Micronet Dual Digital Display (Multifunction)
T121 Micronet Hull Transmitter
T910 Triducer (Speed, Depth, Temp)
T111 Micronet Dual Digital Display (Multifunction)
The Dual Digital Display shows two lines of data simultaneously. It can be configured at any time to display any information provided by your transmitters.
T121 Micronet Hull Transmitter
The Speed, Depth and Compass Transducers link to the Hull Transmitter which sends the information to the Micronet Displays by wireless link. It can be sited anywhere convenient on the boat usually close to the transducers.
|
1142.29 |
|
|
Marine Navigation & Instruments, Supplies and Equipment
With a wide variety of Marine Navigation equipment and Instruments, we can help you find your location on the waterways, avoid hazards, and be respectful of other boaters. The accessories you have on your boat are important, but very few of them are as valuable as the AIS systems, autopilots, black box modules, and other options you can choose from when you want to make sure you can find your way there and back again while staying away from areas that could mean running aground or experiencing other dangers. We offer many types of navigation equipment, including cameras - network video, ice flashers, and marine monitors.
Depending on where you are going to be boating and what you plan to do with your time on the water, you can also find a fishfinder/sounder - color or a fishfinder/sounder - mono that will be right for you, along with GPS - chartplotters, GPS - fishfinder combos, or a GPS - track plotter. Network accessories and network capable displays are available, and we have a selection of night vision, software, transducers and transducer accessories, and weather fax equipment. If you need radar - stand alone options or radar domes / arrays, look no further than right here, where the selection is good and so are the prices.
|
|
|
Depth Speed Temp Active NMEA0183 Thru-Hull - Plastic
Add a DST800 depth, speed and temperature transducer to WindSense to create a complete instrument system. Compatible apps can utilize the boat speed data to calculate true wind speed and direction.
|
419.95 |
|
|
Triton² Speed/Depth Pack with DST-810 Transducer
The full-color Triton² Display provides sailors with a clear visual representation of key instrument data including Speed, Depth, Wind, Heading, AIS targets, GPS data, and more.
An Optically Bonded display means absolutely zero condensation or fogging, while transflective LCD technology provides exceptional contrast and visibility – day or night – while consuming less power than traditional backlight-only displays. The flexible, NMEA 2000® certified, Triton² Display can be integrated into a wider navigation system and also be combined with a Triton² Pilot keypad and NAC autopilot computer to create a complete autopilot control system, featuring B & G sail-specific autopilot steering algorithms.
Features:
Optical Bonding Sporting an Optically Bonded 4.1-inch LCD display, Triton² allows you to see clearly in all conditions with its large clear color display 100% free from condensation or fogging.
Efficient LCD Technology: Transflective LCD technology uses reflected ambient light to enhance day-time visibility, providing the clearest sailing dedicated display available. LED backlighting provides highly adjustable illumination when required, making Triton² exceptionally efficient and extending the time available from your battery capacity.
Easy to Use: Triton² provides simple on-screen menus controlled by soft-touch and reliable waterproof buttons.
Intuitive design makes it easy to configure and use your display.
Low Profile Design: At just 8mm thin the Triton2 instrument adds a sleek look to any boat.
Nearly half the dimension of its thick competitors, Triton² won’t get in the way, catch ropes or offend the eye!
NMEA 2000® Certified: NMEA 2000 certification means you can be confident when adding Triton2 to an existing NMEA 2000 system. NMEA 2000 certification also opens up a wide variety of future expansion options for your Triton² system..
Easy Installation: A straight-forward front mounting method and a clip-on bezel over the (4) mounting screws combine with a single NMEA 2000 connection carrying both power and networked data.
The Triton² is simple and quick to install:
Autopilot Integration: Triton² will display B & G Pilot data on a clear status screen.
With the addition of a Triton² Pilot keypad, the instrument becomes a fully functional Pilot controller.
What's in the box?
Triton² Digital Display.
N2KEXT-2RD, Cable, Micro-C, 0.6 (2 ft)
N2K-MICRO-C, T-JOINER
INSTALL KIT TRITON2/IS42
Suncover, Triton² Display
DST-810 Depth/Speed/Temp Sensor. Plastic Housing
N2k Backbone Starter Kit
|
1258.80 |
|
|
Tacktick T104 Super Sailing Package - Dual Digital & Analog Display
Tacktick Super Sailing Package
Package Contains:
T111 Micronet Dual Digital Display (Multifunction)
T112 Micronet Analogue Display
T120 Micronet Wind Transmitter
T121 Mcironet Hull Transmitter
T122 Micronet Wireless NMEA Interface
T911 Speed Transducer (long body thru hull retractable)
T912 Depth Transducer (long body thru hull retractable)
|
2687.01 |
|
|
Tacktick Wind System
Package Contains:
T111 Micronet Dual Digital Display (Multifunction)
T121 Micronet Hull Transmitter
T911 Speed Transducer (long body thru hull retractable)
T912 Depth Transducer (long body thru hull retractable)
T111 Micronet Dual Digital Display (Multifunction)
The Dual Digital Display shows two lines of data simultaneously. It can be configured at any time to display any information provided by your transmitters.
T121 Micronet Hull Transmitter
The Speed, Depth and Compass Transducers link to the Hull Transmitter which sends the information to the Micronet Displays by wireless link. It can be sited anywhere convenient on the boat usually close to the transducers.
|
1154.99 |
|
|
SeaTalk1 to NMEA Interface
Digital Yacht's SeaTalk to NMEA (ISO) Converter is a small, but powerful interface that provides bi-directional conversion between a SeaTalk network and an NMEA 0183 network or device. Taking its power from the SeaTalk network, the ST-NMEA Converter features a full, multi-transistor SeaTalk 1 interface, an opto-isolated NMEA 0183 input and differential NMEA 0183 output that allows key navigational data to be reliably shared between the SeaTalk and NMEA0183 networks.
For developers and advanced users that want to access the raw SeaTalk data, the ST-NMEA converter can also be configured to work in a special “raw data" mode ($STALK) which is gaining support in some Open Source projects.
The ST-NMEA (ISO) Converter is ideal for connection to one of Digital Yacht's wireless NMEA servers, allowing SeaTalk owners to go wireless and aUSB Version of the ST-NMEA Converteris also available for direct connection to a PC, Mac or even a Raspberry Pie embedded Linux system.
Features:
Converts SeaTalk1 to NMEA data
Powerful bi-directional converter –also converts NMEA to SeaTalk for use with 3rdparty transducers and sensors
Powered from the SeaTalk network –easy red, black and yellow wire colour coding
Features reliable multi-stage transistor SeaTalk interface
Opto-isolated NMEA0183 input and differential NMEA0183 output
Converts all of the key navigational data
USB version (for PC & MAC) also available
USB variant can also be configured to operate in “Raw Data” mode ($STALK)
NMEA Version - Typical Connections:
Connects direct to SeaTalk1 cabling using familiar red, black and yellow wiring
Add the WLN10HS for wifiintegration to iPads and tablets
Add the WLN20 (dual input NMEA to WiFi server) for AIS and SeaTalk to wifi systems
|
176.35 |
|
|
CO Alert Carbon Monoxide Alarm with NMEA 2000
The lethal nature of CO means every boat should be protected with a local alarm. Of course, a typical household alarm could be installed but these have limitations for onboard use. They utilize an internal battery which will often expire when left for long periods – it’s all too easy to forget to replace with seasonal use on a boat. What’s more, just a local alarm in a cabin with a crew member sleeping and the vessel underway with the noise of an engine is unlikely to be effective. CO Alert from Digital Yacht is built for demanding, maritime environments plus has NMEA 2000 integration so alerts will pop up on the boat’s compatible MFD.
CO Alert creates a standard NMEA 2000 alert PGN which allows pop-up alarms on compatible MFDs. (At present, this functionality is best implemented by Garmin).
The system can also be expanded further with our NavAlert general-purpose alert and monitoring device and our 4GX/5GX internet access systems. With this combination, SMS messages can be generated for a CO Alert and sent to a remote phone.
Features:
DC-powered and UL-listed detector
Connects to NMEA 2000 bus
Ultra-low power consumption (<25mA)
Local loud alarm
Test function & continuous checking for system fault
NMEA 2000 alerts for activation and fault
Multi cabin compatible with multiple detectors (NMEA 2000 instance field programmable)
|
293.95 |
|
|
DIGITAL YACHT - NEW PRODUCT ALERT!
Digital Yacht has introduced the GPS160, high performance positioning sensor using GPS, Galileo and Glonass satellite systems for exceptional positioning accuracies and redundancies.
TriNav technology allows all three systems to be simultaneously utilized for navigation. The device can also be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure and more.
NEW! Galileo GNSS
The GPS160 supports GPS, Glonass and Galileo positioning. TriNav technology is used to combine signals from all three systems to compute the best possible fix accuracy and reliability.
MOB Features:
-GPS160 accepts an external switch inpu to activate internal MOB function
-Position is automatically saved and GPS160 calculates and outpus a "synthetic" AIS MOB NMEA sentence allowing compatible plotters to mark the MOB position automatically - just as if an AIS SART had been activated
-Easily installed with a simple push button switch or for connection to outboard kill switch and tether
-Can also function with 3rd party wireless MOB systems with any switched alarm output
Digital Yacht is all about next generation navigation, communication and entertainment systems for your boat. Boating should be fun, safe and easy and Digital Yacht products integrate into existing and new boat networks to bring a powerful dimension to your onboard electronics.
Specials Closeouts Remanufactured Rebates
|
|
|
BM100 Battery Monitoring Solution
The BM100 is a complete system comprising SmartShunt and the veKonvert NMEA 2000 interface. It is part of Digital Yacht’s iSeaSense range of NMEA 2000 boat instruments. With this solution, your multi-function display becomes a sophisticated battery and energy management system.
Features
Digital Yacht’s BM100 battery monitoring system allows highly accurate DC voltage, current, and capacity measurements, enabling reliable monitoring of your boat’s battery and electrical system.
Core to the system is the SmartShunt. It measures battery voltage and current. Based on these measurements, it intelligently calculates the battery’s state of charge and the time to depletion for the remaining charge. It also keeps track of historical data, such as the deepest discharge and average discharge current, as well as the number of charge and discharge cycles. The smart shunt can also monitor the voltage of a 2nd battery, typically dedicated to engine starting.
The product is a collaboration between Victron Energy and Digital Yacht. The system utilizes Victron’s proprietary VE.Direct data connectivity as a source for the NMEA 2000 data.
The BM100 is part of a wider group of products now introduced by Digital Yacht that bring NMEA 2000 connectivity to Victron systems using the VE.Direct interface.
Victron solar panel controllers (MPPTs) and battery monitors can now also interconnect to NMEA 2000 via the veKonvert interface.
Monitoring the battery with the BM100 will give important feedback to the user so that remedial measures can be taken when necessary. Doing this will extend battery life. There’s also an optional battery temperature sensor available.
The BM100 can also integrate with Digital Yacht’s other NMEA 2000 and wireless instruments, which offer hybrid NMEA 2000 and wireless display options.
NMEA 2000 Interface
The system features an NMEA 2000 interface, so your navigation multi-function display or plotter can display all key parameters. Modern MFDs from leading manufacturers such as Garmin, Raymarine, Furuno, and Navico allow electrical battery data to be displayed via their NMEA 2000 interface. Alarms and alerts for low capacity and voltage can also be enabled.
Bluetooth Interface
The BM100 also has a standalone wireless Bluetooth interface, so your mobile phone or iPad can connect and display current, voltage, capacity, additional historical data, state of charge information, and time to go based on remaining battery capacity.
Specifications:
BM100 solution comes as a complete package with SmartShunt and the veKonvert NMEA 2000 interface
Bluetooth interface for setup and detailed analysis, including charge/discharge cycles, state of charge, remaining capacity, and historical data
Use your phone/tablet and your NMEA 2000 devices for battery monitoring and management
500A SmartShunt included for the main battery system
Monitor the voltage of a separate (eg starter) battery
Universal NMEA 2000 gateway for Victron’s popular range of smart battery monitors/SmartShunt using the VE.Direct interface (see compatibility list in the FAQ tab)
Enables electrical and battery monitoring and management on compatible multi-function displays (Raymarine, Garmin, Navico, Furuno, etc)
Provides battery voltage, charge/discharge current, state of charge, and time to depletion based on a sophisticated algorithm
Easy installation, plug ‘n play connectivity, and self-powering from the NMEA 2000 bus
Supports alerts generated by the SmartShunt
Supports multiple SmartShunts for multi-battery systems
Also compatible with other VE.Direct products such as solar MPPT controllers
Vekonvert Is Compatible with the Following Victron Products:
BMV -700, BMV -702, BMV -700H, BMV-712 Smart, BMV-710H Smart, BMV-712 Smart Rev2, SmartShunt 500A/50mV, SmartShunt 1000A/50mV, SmartShunt 2000A/50mV, and All MPPT Charge Controllers
NOTE: veKonvert is not compatible with Victron Chargers and Inverters. It should also not be plugged into the VE.Direct interfaces of any Victron "Consumers" such as Multiplus, Quattro, Cerbo, etc.
|
335.95 |
|
|
Triton² Speed, Depth & Wireless Wind System Pack - Contains 2 Triton² 4.1" Color Display, DST810 Transducer, WS320 Wireless Wind Sensor & NMEA2000 Starter Kit
The full-color Triton² displays provide sailors with a clear visual representation of key instrument data including Speed, Depth, Wind, Heading, AIS targets, GPS data, and more.
An Optically Bonded display means absolutely zero condensation or fogging, while transflective LCD technology provides exceptional contrast and visibility – day or night – while consuming less power than traditional backlight-only displays. The flexible, NMEA 2000® certified, Triton² Display can be integrated into a wider navigation system and also be combined with a Triton² Pilot keypad and NAC autopilot computer to create a complete autopilot control system, featuring B & G sail-specific autopilot steering algorithms.
Features
Optical Bonding: Sporting an Optically Bonded 4.1-inch LCD display, Triton² allows you to see clearly in all conditions with its large clear color display 100% free from condensation or fogging.
Efficient LCD Technology: Transflective LCD technology uses reflected ambient light to enhance day-time visibility, providing the clearest sailing dedicated display available. LED backlighting provides highly adjustable illumination when required, making Triton² exceptionally efficient and extending the time available from your battery capacity.
Easy to Use: Triton² provides simple on-screen menus controlled by soft-touch and reliable waterproof buttons. Intuitive design makes it easy to configure and use your display.
Low Profile Design: At just 8mm thin the Triton² instrument adds a sleek look to any boat. Nearly half the dimension of its thick competitors, Triton² won’t get in the way, catch ropes or offend the eye!
NMEA 2000® Certified: NMEA 2000 certification means you can be confident when adding Triton² to an existing NMEA 2000 system. NMEA 2000 certification also opens up a wide variety of future expansion options for your Triton² system.
Easy Installation: A straight-forward front mounting method and a clip-on bezel over the (4) mounting screws combine with a single NMEA 2000 connection carrying both power and networked data. The Triton² is simple and quick to install
Autopilot Integration: Triton² will display B & G Pilot data on a clear status screen. With the addition of a Triton² Pilot keypad, the instrument becomes a fully functional Pilot controller.
Comes with
N2K MICRO-C BACKBONE KIT - 000-10760-001
TRITON2 DIGITAL DISPLAY - 000-13294-001 (x2)
WS320 (wireless) Interface - 000-14388-001
WS320 Wireless Wind Sensor - 000-14390-001
DST-810 DEPTH/SPEED/TEMP SENSOR - 000-15735-001
|
2528.85 |
|