MB1100 The MB1100 is a matching box for Furuno LCD sounders. It is used to connect a dual-frequency transducer to an appropriate Furuno LCD sounder. The MB1100 comes with a 10-pin connector already supplied, and so does not require the use of a separate pigtail cable assembly. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B175HW CHIRP Bronze Thru-Hull 12° Tilt 1kW - 10-Pin Connector High-Frequency, Wide-Beam CHIRP Transducer with Temperature with Bronze Thru-Hull with 12° Tilt. Features: Power: 1kW Function: Depth,Temperature Frequency: 150-250 kHz Mount Style: Thru-Hull, Flush, 12 Degree Tilt Housing Material: Bronze 10-Pin Connector This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B175HW Chirp Bronze Thru-Hull 20° Tilt 1kW - 10-Pin Connector High-Frequency, Wide-Beam CHIRP Transducer with Temperature with Bronze Thru-Hull with 20° Tilt. Features: Power: 1kW Function: Depth,Temperature Frequency: 150-250 kHz Mount Style: Thru-Hull, Flush, 20 Degree Tilt Housing Material: Bronze This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Marine Navigation & Instruments, Supplies and Equipment With a wide variety of Marine Navigation equipment and Instruments, we can help you find your location on the waterways, avoid hazards, and be respectful of other boaters. The accessories you have on your boat are important, but very few of them are as valuable as the AIS systems, autopilots, black box modules, and other options you can choose from when you want to make sure you can find your way there and back again while staying away from areas that could mean running aground or experiencing other dangers. We offer many types of navigation equipment, including cameras - network video, ice flashers, and marine monitors.   Depending on where you are going to be boating and what you plan to do with your time on the water, you can also find a fishfinder/sounder - color or a fishfinder/sounder - mono that will be right for you, along with GPS - chartplotters, GPS - fishfinder combos, or a GPS - track plotter. Network accessories and network capable displays are available, and we have a selection of night vision, software, transducers and transducer accessories, and weather fax equipment. If you need radar - stand alone options or radar domes / arrays, look no further than right here, where the selection is good and so are the prices.

TM265C-LM-12F Transom Mount Transducer with 12-Pin Connector for Furuno TZT12F, TZT16F & TZT19F Rely on Airmar's broadband transducers for the ultimate fishing mission! Whether you're a commercial fisherman, charter captain, or tournament angler, there's a new game in town. Traditional marine fishfinders operate at discreet frequencies such as 50 kHz and 200 kHz, use relatively short-duration pulses, and use narrowband sonar transducers. In contrast, CHIRP uses a precise sweep pattern of many frequencies within a long-duration transmits pulse from a broadband transducer, so the equivalent sound energy transmitted into the water is 10 to 1,000 times greater than a conventional marine fishfinder. Specifically designed for smaller boats (25'-40'), the TM265C-LM CHIRPS across the following bandwidths: Low & Medium-Frequency (LM) Low—Chirps from 42 kHz to 65 kHz, 25° to 16° beamwidth Medium—Chirps from 85 kHz to 135 kHz, 16° to 11° beamwidth Medium-frequency benefits include the ability to sound deeper than the high-frequency, along with better target resolution than the low-frequency Features: 8-Internal, Broadband Ceramic Elements Depth & fast-response water-temperature sensor Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking) Operating frequencies: Low—Chirps from 42 kHz to 65 kHz Medium—Chirps from 85 kHz to 135 kHz Beamwidth (Adjustable): Low—25° to 16° Medium—24° to 16° 10 m (33’) cable The depth and fast-response water-temperature sensor 12 Pin Connector for use with Furuno TZT12F and TZT16F Displays Urethane transducer housing and stainless steel mounting bracket Boat Size: 8 m to 12 m (25’ to 40’) Hull Type: Fiberglass, wood, or metal Exclusive Transducer ID This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Urethane In-Hull Transducer, 1kW (10-pin), Broadband The 527ID-IHD is an in-hull transducer utilizing Broadband Technology. M260 Transducer with In-Hull Kit 1,000 Watts Power 50/200 kHz w/Diplexer 19/6 degree Beam Angles Plastic Transducer with In-Hull Mounting Kit 10-Pin Connector WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

165T-50/200-SS260 DFF3D Thru-Hull Combo Transducer Stainless Steel Combination Thru-Hull The 165T-50/200-SS260 includes the DFF3D elements along with 50/200 kHz elements and temperature and motion sensors. It can be connected to the DFF3D Multi-Beam Sonar along with one sounder. These transducers save money and space compared to purchasing and installing two separate transducers. Features: Stainless Steel Thru Hull with high speed fairing block Can be flush mounted in keel without using fairing block DFF3D operating frequency: 165 kHz Built-in motion sensor Built in temp sensor 1kW, 50/200 kHz, 20/6 ° beam angles for sounder elements - the same elements as an Airmar B164 transducer 12M Cables with 10-pin Connector for sounder, 7-pin connector and a pigtail cable for the DFF3D Recommended for a TZtouch2 or a TZtouch/DFF1, and DFF3D installation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

SS60 Stainless Steel Thru-Hull 20° Tilt, 50/200, 10-Pin Stainless Steel Thru-Hull Transducer with Temp, 600W (10-Pin), 20° Tilted Element. If a thru-hull flush-style transducer is called for, the Tilted Element SS60-SLTD/20 will accommodate a deadrise angle between 16° and 24°. This transducer compensates for deadrise by angling the element inside the housing. The transducer is labeled with an arrow on top of the housing that should point towards the keel, whether it is installed to port or starboard. This ensures that the tilted element within the housing is given the correct orientation.  Features: 600 Watts 50/200 kHz 45/12 degree Beam Angles Stainless Steel Thru-Hull with Temperature 30' Cable with 10-Pin Connector

Transom Mount Transducer w/ Temp, 1kW (10-Pin) M258 Transducer with Transom Mount Bracket 1 kW 50/200 kHz 14x23 degree/3x5 degree Beam Angles Transom Mount with Temperature 10 Meter Cable with 10-Pin Connector WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

P79 Plastic In-Hull Transducer, 600w (10-Pin) 600 Watts 50/200 kHz 45/15 degree Beam Angles Plastic In-Hull Mount for Shoot-Through Applications 30 Foot Cable with 10-Pin Connector WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Bronze Thru-Hull Transducer w/ Temp, 600w (10-Pin) 600 Watts 50/200 kHz 45/15 degree Beam Angles Bronze Thru-Hull with Temperature 30 Foot Cable with 10-Pin Connector WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Plastic Thru-Hull Transducer, 600w (10-Pin) 600 Watts 50/200 kHz 46/10 degree Beam Angles Plastic Thru-Hull 8-Meter Cable with 10-Pin Connector WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Bronze Thru-Hull, Low Profile, Transducer, 600w (10-Pin) 600 Watts 50/200 kHz 45/15 degree Beam Angles Low Profile Bronze Thru-Hull 30 Foot Cable with 10-Pin Connector WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Plastic Transom Mount Transducer w/ Temp, 600w (10-Pin) 600 Watts 50/200 kHz 40/10 degree Beam Angles Plastic Transom Mount with Temperature 30 Foot Cable with 10-Pin Connector WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Plastic Thru-Hull, Low Profile, Transducer, 600w (10-Pin) 600 Watts 50/200 kHz 45/15 degree Beam Angles Low Profile Plastic Thru-hull 30 Foot Cable with 10-Pin Connector WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.