ST60 Long Arm Masthead Transducer Raymarine's ST60 Long Arm Masthead Transducer comes with a 30m cable.

Marine Navigation & Instruments, Supplies and Equipment With a wide variety of Marine Navigation equipment and Instruments, we can help you find your location on the waterways, avoid hazards, and be respectful of other boaters. The accessories you have on your boat are important, but very few of them are as valuable as the AIS systems, autopilots, black box modules, and other options you can choose from when you want to make sure you can find your way there and back again while staying away from areas that could mean running aground or experiencing other dangers. We offer many types of navigation equipment, including cameras - network video, ice flashers, and marine monitors.   Depending on where you are going to be boating and what you plan to do with your time on the water, you can also find a fishfinder/sounder - color or a fishfinder/sounder - mono that will be right for you, along with GPS - chartplotters, GPS - fishfinder combos, or a GPS - track plotter. Network accessories and network capable displays are available, and we have a selection of night vision, software, transducers and transducer accessories, and weather fax equipment. If you need radar - stand alone options or radar domes / arrays, look no further than right here, where the selection is good and so are the prices.

Wind Transducer with 30M Cable Elegant, Accurate & Affordable The FI5001 is an analog Wind Transducer for use with the FI50 and FI70 series of instrument displays. It is capable of detecting wind angle accuracy of better than ±10° and wind speed accuracy of better than ±5% (20 kt). The FI5001 has a power requirements of less than 40 mA on a 12VDC system. Important Note: The FI5001 Sensor does not come with a cable as standard, while the FI5001/30M comes with a 30 meter cable. Available 30 meter and 50 meter cable kits include a junction box. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

RSW Wired - Smart Performance Wind Transducer - Short Arm with 30M Cable The RSW Wired, Smart Wind transducer is a professional-level wind sensor designed to deliver highly accurate calibrated wind speed and direction data. Supplied with a 30-meter Smart Wind mast cable as standard. Install & Go! Raymarine Smart Wind technology delivers expert-level accuracy without the need for additional, expensive processors or extensive calibration and set-up.  Finely Tuned Through rigorous wind tunnel testing, we've fine-tuned and balanced the instrument to ensure that data from the masthead is accurate and consistent. Sail Smarter Trusted, high-accuracy True Wind data combined with the Alpha Performance Displays and Axiom Chartplotters let you sail smarter. Specifications: Length     Wind transducer (including cable): 657.762 mm (25.90 in) Wind transducer (excluding cable): 540.712 mm (21.29 in) Wired gateway: 155.61 mm (6.13 in) Width     Wind transducer: 46.96 mm (1.85 in) Wired gateway: 47.38 mm (1.88 in) Height     Wind transducer: 305.86 mm (12.04 in) Wired gateway: 30.61 mm (1.21 in) Power Nominal supply voltage: 12 V dc (via SeaTalk NG) Operating voltage range: 9 V to 16 V dc Power Consumption: < 100 mW Fuse rating: Ensure that the SeaTalk NG backbone is protected by a 5 A fuse NMEA 2000 LEN (Load Equivalency Number) - based on nominal 9 V rating: 1 Environmental Operating temperature range: -25°C to +55°C (-13°F to +131°F) Storage temperature range: -30°C to +70°C (-22°F to +158°F) Relative humidity: Masthead: 100%/Below deck: up to 93% @ 40°C Waterproof rating: Wind transducer: IPx6/IPx7/Wired gateway: IPx3 Wind: 115 mph (185 kph) Vibration: EN 60945:2002 (exposed) What's In The Box? No.10 x 3/4" self tapping screws x 4 (for mounting the wind transducer) No.7 x 3/4" self tapping screws x 2 (for mounting the gateway) 40 mm (1.57 in) heat shrink tube (required to insulate ground wire when shortening the mast cable) Ring crimp terminal (required for additional ground connection when the gateway is not mounted on a metal surface) Mast cable, 30 m (98.43 ft) reel Documentation Wind transducer Smart wind-wired gateway SeaTalk NG to DeviceNet adaptor cable, 120 mm (4.72 in)

Compatible with the following instruments: ST70* ST60+ ST290 Compatible hull material: Wood and Fiberglass Frequency: 200 kHz Cable: 45ft cable Hole diameter for installation: 2" Note: E66023 Fairing block sold separately. *Using with ST70 requires purchase of ST70 Speed Pod and ST70 Depth Pod, sold separately.

gWind™ Transducer with GND™ 10 Black Box Bridge The Garmin gWind Transducer features twin-fin technology with three-bladed propeller for more accurate True Wind Speed (TWS) in lighter air while the twin fin design gives a more stable True Wind Angle (TWA). The three-bladed propeller, unlike a cups design, is always efficient. Combined with optic reading this transducer provides superior accuracy at low wind speeds and also provides for excellent linearity. Included GND 10 black box bridge enables the Nexus Network and compatible Garmin chartplotters to share critical NMEA 2000 data. The GND 10 enables Garmin chartplotter owners to use Nexus sail equipment and vice versa. Features: Three-bladed propeller for more accurate True Wind Speed (TWS) in lighter air Twin-fin design gives a more stable True Wind Angle (TWA) Optic reading technique makes this transducer superior at low wind speeds and provides for excellent linearity GND 10 black box bridges NMEA 2000 data to Nexus Network and enables Garmin compatible chartplotters to work with Nexus sail equipment and vice versa Easy plug-and-play installation between Nexus, Garmin chartplotters, NMEA 2000 and USB networks GND™ 10 Black Box Bridge The GND 10 black box bridge seamlessly integrates Nexus instruments and sensors with the Garmin family. It converts data between the Nexus Network and NMEA 2000 to provide compatibility between Nexus and Garmin products, including gWindT, gWindT Wireless and gWindT Race transducers. Simple plug-and-play installation between Nexus and NMEA 2000, with USB connectivity, eliminates the need for user setup and system configuration. GND 10 allows PC applications, such as NexusRace, Expedition, Adrena or SeaTrack, to communicate sailing-specific functions between Nexus and NMEA 2000 networks. It also enables GND 10 software updates over NMEA 2000. Existing NexusRace PC application can be used to update software, configure and calibrate Nexus devices over USB using the FDX protocol. Features: Converts data between the Nexus network and NMEA 2000® Provides compatibility between Nexus and Garmin products Simple plug-and-play installation between Nexus, NMEA 2000 and USB No user setup or system configuration required Allows PC applications, such as NexusRace™, Expedition, Adrena or SeaTrack, to communicate sailing-specific functions between Nexus and NMEA 2000 networks In The Box gWind transducer GND™ 10 NMEA 2000® drop cable (2 m) NMEA 2000 T-connector Mast cable with female connector (25 m) Nexus female field installable connector Mast bracket Mounting hardware Documentation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Long Stem ForwardScan™ Transducer w/Sleeve Plug & Fairing Block ForwardScan™ Sonar is the ideal forward looking two dimensional echo-sounder for all power and sail boats that want safety and peace of mind that comes with knowing the depth of the water ahead of the boat. Unlike other Forward-looking sounders, the ForwardScan™ can display bottom imagery up to 8 times the current depth, it integrates with your onboard NS evo2 or Zeus Touch providing full control at any operating station Provides water depth information in front of the boat to allow boaters to confidently navigate shallow or poorly charted waters Look ahead view is capable of up to 8 times the depth however the normal operating range is 4 to 5 times the depth. Ex 10' depth would provide a 80' forward view Operates at 180kHz to reduce interference from tradition 200kHz echo sounders. Transmits and receives up to ten times faster than previous forward looking systems providing a real time update. Easy Auto Ranging: Auto forward range and auto depth range default options update the range scales to best suit the viewing of the depth in front of the boat with no button pushing. The deeper the depth range the further forward range. The shallower the depth range the shorter forward range System Overview Unlike other forward looking sonar solutions this is fully integrated to the network allowing control and viewing of the ForwardScan information on multiple displays simultaneously and even via GoFree on a tablet. Network Options: Connect directly to Sonar Hub or NSS evo2. ForwardScan Sonar view available on the following displays NSS Evo2, NSO Evo2, Zeus2 Unique Selling Point Look way beyond the bow of your boat for confident navigation of shallow water or poorly charter areas Complete integration maximizes viewing and control Easy to view and operate with unique Bottom Coloring and Auto Scaling Proven installation using a standard 2" stainless thru-hull fitting which allows for a transducer plug design install and removal while boat is in water Flexible networking with direct connect to SonarHub or NSS Evo2. The following current products will require free software updates to be compatible with the ForwardScan transducer which will be available on the Simrad and B&G support website near availability of the ForwardScan transducer: NSS Evo2 Zeus 2 SonarHub.

Platinum 2" Depth Sounder w/Transom Mount Transducer Faria Beede’s Platinum Series Instruments feature spun aluminum gauge dials with custom graphics and a polished stainless steel bezel providing a rugged, elegant look.   The Depth Sounders from Faria offer a 3-199 foot (1-61meters) depth capability, with an automatic gain control, backlighting for maximum night vision, keel offset, and deep and shallow water alarms.  Depth can be read in meters, and feet. With its oversized back-lit display depth can be easily read in any condition. Audible and Visual alarms let the boater know when a shallow or deep water condition exists.   Depth Sounder includes a Faria SN2011 transom mount transducer w/25' cable. 2" - Hole Size: 2.0625" (53mm) Specifications: Imperial and Metric Values 199 Foot (61m) Depth Capability Audible and Visual alarm for Shallow/Deep Water Conditions Domed Glass Anti-fog, Scratch Resistant Lens Stainless Steel Bezel Factory P/N DS0176 *Sold as an Individual *Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

RD424HD Includes 10m Cable - A80228 24" HD Dome - E92143 Raymarine's HD Digital radome scanners combine the power and clarity of HD Digital signal processing with an ultra-compact scanner suitable for all types of vessels. Compatible with a,c & e Series Multifunction Displays, these radomes offer a 256-color radar display and the clearest, most lifelike radome presentation available from any radome scanner. The RD424HD feature the same adaptive digital receiver technology found in our open array antennas. By adjusting automatically to changing environmental and sea conditions, the HD Digital radomes provide crisp, accurate contact echoes at short ranges, as well as outstanding long range performance up to 48 nautical miles. RD424HD Features: Adaptive digital receiver automatically adjusts to changing environmental and see conditions for a dramatically clearer picture Fast digital receiver processor 256 color multi-level target display with selectable color palettes New Bird Mode automatically optimizes the receiver for detecting sea birds above schools of fish¹ New High Speed Mode (48 RPM) automatically engages for optimal tracking of high speed targets at short ranges Dual-range mode allow you to monitor both long and short ranges simultaneously with a single scanner and display

Active Imaging 2-in-1 Transducer & 83/200 Pod In-Hull Transducer with Y-Cable  Allows for connection of an in-hull puck transducer and an Active Imaging 2-in-1 (Side/Down) transducer to the single sonar port of an Elite Ti2 or Elite FS display. Features: Active Imaging 2-in-1 Transom Transducer 83/200 Pod/Puck Transducer without temperature Dual 9-pin Y-cable

Bulkhead Mount Micro USB Socket with 1M Cable for DJI Drones Only Raymarine mounting module with DJI Drone connection cable.

FishTrax™ Standard Transducer Have you lost, or damaged your standard FishTrax™ transducer?  This kit will get you back on the water in no time.   Includes all standard hardware and is 100% compatible with all FishTrax™ Series fish finders.  Compatible with: FishTrax™ 1, FishTrax™ 1X and FishTrax™ 1C In the Box: FishTrax™ transducer w/15' cable Velcro Cable Strap Rubber Float Stopper Closed-Cell Foam Float *Sold as an Individual

Kronos 2" Depth Sounder with In-Hull Transducer Polished Stainless Steel Bezel, flat glass lens, Perimeter lighted spun Aluminum dial with Gold and Black graphics. The Depth Sounders from Faria offer a 3-199 foot (1-61meters) depth capability, with an automatic gain control, backlighting for maximum night vision, keel offset, and deep and shallow water alarms.  Depth can be read in meters, and feet. With its oversized back-lit display depth can be easily read in any condition. Audible and Visual alarms let the boater know when a shallow or deep water condition exists.   Depth Sounder includes a Faria SN2010 In-Hull Transducer w/20' cable. 2" - Hole Size: 2.0625" (53mm) Specifications: Imperial and Metric Values 199 Foot (61m) Depth Capability Programmable Keel Offest Audible and Visual alarm for Shallow/Deep Water Conditions Flat Glass Anti-fog, Scratch Resistant Lens Stainless Steel Bezel Factory P/N DS0131 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

FishTrax™ 1C Fish Finder w/HD Color Display Introducing the world’s most versatile fish finder.  This powerful, handheld unit uses SONAR technology to locate fish depth and measure water temperature & bottom contour.   Use it on a motorboat, kayak, or even on the ice in winter. Features: 2” HD Color Display Waterproof Housing Easy-to-use menu options and settings.  Designed by fishermen, for fishing enthusiasts of all experience levels. Use automatic mode for quick and easy setup, or dial in precise readings with manual mode. Ice Mode Digital Flasher allows precise jig depth readings while ice fishing. Programmable audible alarms let you know when fish are present, or a desired depth has been measured.  VariableZone Temperature Sensor measures water temperature throughout the water column for species pinpointing. Polarized LCD for glare-free viewing Technical Specifications: Dimensions (H x W x D)  6" x 3" x 2" (153 x 77 x 51mm) Screen Size (H x W) -  2" x 1.6" (50 x 40mm) Operating Temperature - 0 to 160°F  (-18 to 71 °c) Depth Range -  1.5' to 240 ft (.5 to 75 M) Transducer Cable Length - 15' (4.5 m) Transducer Frequency - Dual 200/83 kHz Transducer Beam Angle - Dual 14/26° Power - four (4) AAA Batteries In the Box: FishTrax™ 1C fish finder Transducer w/15' cable *Sold as an Individual 

FishTrax™ Transom Mount Transducer  The FishTrax transom mount transducer allows high-speed, on-plane operation of all FishTrax fish finders.  Compatible with: FishTrax™ 1, FishTrax™ 1X and FishTrax™ 1C In the box: Transom mount transducer w/30' cable  Transom mount bracket w/mounting hardware Instruction manual *Sold as an Individual