12V Lithium Ion Battery & Charger Lightweight and powerful, the V-120L 12 Volt, 9 amp-hour Vexilar Lithium battery has been designed to replace any current Vexilar Flasher/Pack battery and still allow use of the 1 amp, fully-automatic Vexilar battery charger. Features: Drop-in replacement for any current Vexilar Flasher/Pack battery LiFePO4 technology Delivers twice the number of battery re-charging cycles over sealed lead-acid batteries Half the weight of the sealed lead-acid battery

12V Lithium Ion Battery 9.6 AH LI lightweight and powerful. This 12 Volt 9 amp-hour Vexilar Lithium battery has been designed to replace any current Vexilar Flasher/Pack battery and still allow use of the 1amp fully-automatic Vexilar battery charger. Drop in replacement for any current Vexilar Flasher/Pack Battery LiFePO4 technology Delivers twice the number of battery re-charging cycles over sealed lead-acid batteries 2.75 lbs (Half the weight of the Vexilar SLA battery). 

Marine Navigation & Instruments, Supplies and Equipment With a wide variety of Marine Navigation equipment and Instruments, we can help you find your location on the waterways, avoid hazards, and be respectful of other boaters. The accessories you have on your boat are important, but very few of them are as valuable as the AIS systems, autopilots, black box modules, and other options you can choose from when you want to make sure you can find your way there and back again while staying away from areas that could mean running aground or experiencing other dangers. We offer many types of navigation equipment, including cameras - network video, ice flashers, and marine monitors.   Depending on where you are going to be boating and what you plan to do with your time on the water, you can also find a fishfinder/sounder - color or a fishfinder/sounder - mono that will be right for you, along with GPS - chartplotters, GPS - fishfinder combos, or a GPS - track plotter. Network accessories and network capable displays are available, and we have a selection of night vision, software, transducers and transducer accessories, and weather fax equipment. If you need radar - stand alone options or radar domes / arrays, look no further than right here, where the selection is good and so are the prices.

UP30PV Ultra Pack Combo with Broadband Transducer, Lithium Ion Battery & Charger Vexilar has delivered on the dream of developing a broad band flasher sonar with unmatched interference rejection and signal clarity. Based on the same easy to use, auto-ranging performance platform as the FLX-28, the FLX-30 offers the angler seven frequencies from which to choose, and with 20 IR settings, 140 combinations are available to kill interference once and for all! The magic begins with the world’s first broad band Ice-Ducer™ made from an array of dozens of small crystals. They deliver a wide sonar frequency band from a 19-degree beam at 160 kHz to an 8-degree at 300 kHz. Anglers can fine-tune the display to knock-out interference and sharpen target ID down to ¼". The FLX-30 features night mode, three power level settings, three zoom zones, three manual depth setting ranges to 300 feet and five color palette choices. With Vexilar’s legendary sunlight-readable, 525-segment resolution display now enhanced with broad band technology, it is safe to say you will never look at ice fishing the same way again! The Ultra Pack carry case is the ultimate case design to hold the FLX-30. The Ultra Pack carry case is unique in that it has a totally enclosed 12 volt 9 amp hour lithium-ion battery that can power your Vexilar for days not hours. You use a master power switch to power up the system. The Ultra Pack has an oversize carry handle that can also hold your transducer float, four rod holder positions (one rod holder comes with the system) Three transducer support eye holes and a great cable management system. The Ultra Pack easily fits into a 5 gallon bucket and comes with would not be complete without a Vexilar tackle box and positions to mount other Vexilar accessories like the Flex-Light, Glo-Ring or more rod holders.  BONUS! A FREE soft pack carry case comes with every UP30PV. This system is ready to use right out of the box! Features: Seven frequencies from 160 to 300 kHz 140 interference rejection options (7 frequencies with 20 settings each) Target ID down to 1/4" Digital depth display Day and night display brightness settings Battery status and low-battery alert Three power level settings Three zoom zones Three manual depth setting ranges to 300 feet Five color palette choices Long lasting brushless flasher technology Vexilar’s exclusive broad band Ice-Ducer™ transducer and float 12 volt, 9 amp-hour, Vexilar Lithium battery Fully automatic charger Soft Pack carry case Adjustable rod holder Eye bolt for optional transducer support Master power switch External power posts for accessories Custom Vexilar tackle box Standard two-year limited warranty Specifications: Frequency: 160 kHz, 180 kHz, 200 kHz, 225 kHz, 250 kHz, 275 kHz and 300 kHz Power output: 1,000 watts peak-to-peak (50 watts RMS) Display resolution: 525 segments Current draw: 300 ma at 12V DC Dimensions: 4.4"H x 6"W x 2.5"D Depth Range: Maximum 300 feet Weight: 7 lbs 4.5oz.

Ultra Pack Combo with Lithium Ion Battery & Charger Ultra Pack Fishing Systems The most impressive carry case system ever designed. The Ultra Pack is the ideal name for the most feature packed ice fishing system ever offered by Vexilar. The innovative Ultra Pack System has a 12 volt, 9 amp-hour Vexilar Lithium battery enclosed inside the case, so you don’t need to connect or disconnect your battery after each use. A master power switch powers up your unit, and additional power posts give anglers the option of running other accessories. The case comes with an adjustable rod holder, cable storage cleats, battery charger and even your own Vexilar tackle box! The super tough Ultra Pack will fit into a five gallon bucket. All Ultra Pack Systems are factory assembled and tested here in the USA. Features: High profile for easy access to controls and great display visibility Enclosed battery compartment with Vexilar Lithium 12 volt, 9 amp-hour battery. Includes digital charger Quick charge jack plug for easy charging Ultra Pack fits in a five gallon bucket Adjustable rod holder fits on either side Ice-Ducer® support eye-bolt has three pre-tapped mounting locations around base External power posts for accessories Master On/Off power switch Non-slip bottom The patented Ice-Ducer® system is a self leveling transducer with float for accurate transducer positioning every time Cable storage and holding grips Pre-drilled holes for optional accessories Holder for the Ice-Ducer® transducer Tackle box holder with tackle box included Super strong handle with float holder Available with the FLX-28 or FLX-30BB flasher from Vexilar, the world leader in flasher sonar technology

Freedom XC Pro 3000 Inverter/Charger - 3000W - 150A - 120V - 12V A true sine wave inverter with a built-in lithium-ion battery charger and transfer switch in a compact, lightweight footprint. Configure and monitor system performance via Bluetooth app available on the optional Bluetooth remote panel (# 808-0817-02). The Freedom XC PRO inverter/charger, supporting RV-C and J1939 protocols, is the most versatile and flexible AC power solution in the market today. It also features a 100 amp (2000W model) / 150 amp (3000W model) battery charger and offers all of the configurable features of the Freedom XC series inverter/charger in a compact, light weight package. It cranks out full output in invert or charge mode from -4°F (-20°C) - 104°F (40°C) for operation in all climate temperatures. The extended surge rating enables compressor loads such as an A/C or a fridge to start reliably.  Features: Extended Surge Rating: Surges to 2X continuous power for 5 seconds for motor loads True Sine Wave AC Power: For operation of sensitive and motor loads Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis Programmable AC Under-Voltage (85-110VAC) Shutdown: Feature ideal to operate under weak shore power or generator input Built in 50A AC Transfer Relay (3KW model): Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power Built-In Charger Features: Power Factor Corrected Multi-Stage Charging: Utilizes less shorepower when charging batteries. This frees up more usable AC power for running electrical devices and appliances and reduces the likelihood of tripping shorepower breakers Programmable: Configurable 3 stage temperature compensated battery charge algorithm for optimal charging of almost any battery type up to 18V Battery Equalization: Maximizes flooded battery life Dead Battery Charging Down to 0 Vdc Power Share: Prioritizes AC loads by reducing the charge current and maintaining the total input current to less than the breaker setting Easily configurable settings to charge any lithium ion battery

Freedom XC PRO Marine 2000W Inverter/Charger - 12V A true sine wave inverter with a built-in lithium-ion battery charger and transfer switch in a compact, lightweight footprint. Configure and monitor system performance via Bluetooth app available on the optional Bluetooth remote panel (# 808-0817-02). Seamless integration with Micro-C NMEA 2000 Connector. The Freedom XC PRO Marine inverter/charger, supporting CANbus NMEA 2000 protocol, is the most versatile and flexible AC power solution in the market today. It supports seamless integration with third-party monitoring and control systems. It also features a 100 amp (2000W model) / 150 amp (3000W model) battery charger and offers all of the configurable features of the Freedom XC series inverter/charger in a compact, lightweight package. It cranks out full output in invert or charge mode from -4°F (-20°C) - 104°F (40°C) for operation in all climate temperatures. The extended surge rating enables compressor loads such as an A/C or a fridge to start reliably. Features: Extended Surge Rating: Surges to 2X continuous power for 5 seconds for motor loads True Sine Wave AC Power: For the operation of sensitive and motor loads Ignition Control: Feature to turn the inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis Programmable AC Under-Voltage (85-110VAC) Shutdown: Feature ideal to operate under weak shore power or generator input Built-in 50A AC Transfer Relay (3KW model): Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power Built-In Charger Features: Power Factor Corrected Multi-Stage Charging: Utilizes less shorepower when charging batteries. This frees up more usable AC power for running electrical devices and appliances and reduces the likelihood of tripping shorepower breakers Programmable: Configurable 3 stage temperature compensated battery charge algorithm for optimal charging of almost any battery type up to 18V Battery Equalization: Maximizes flooded battery life Dead Battery Charging Down to 0 Vdc Power Share: Prioritizes AC loads by reducing the charge current and maintaining the total input current to less than the breaker setting Easily configurable settings to charge any lithium-ion battery This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Freedom XC PRO Marine 3000W Inverter/Charger - 12V A true sine wave inverter with a built-in lithium-ion battery charger and transfer switch in a compact, lightweight footprint. Configure and monitor system performance via Bluetooth app available on the optional Bluetooth remote panel (# 808-0817-02). Seamless integration with Micro-C NMEA 2000 Connector. The Freedom XC PRO Marine inverter/charger, supporting CANbus NMEA 2000 protocol, is the most versatile and flexible AC power solution in the market today. It supports seamless integration with third-party monitoring and control systems. It also features a 100 amp (2000W model) / 150 amp (3000W model) battery charger and offers all of the configurable features of the Freedom XC series inverter/charger in a compact, lightweight package. It cranks out full output in invert or charge mode from -4°F (-20°C) - 104°F (40°C) for operation in all climate temperatures. The extended surge rating enables compressor loads such as an A/C or a fridge to start reliably. Features: Extended Surge Rating: Surges to 2X continuous power for 5 seconds for motor loads True Sine Wave AC Power: For the operation of sensitive and motor loads Ignition Control: Feature to turn the inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis Programmable AC Under-Voltage (85-110VAC) Shutdown: Feature ideal to operate under weak shore power or generator input Built-in 50A AC Transfer Relay (3KW model): Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power Built-In Charger Features: Power Factor Corrected Multi-Stage Charging: Utilizes less shorepower when charging batteries. This frees up more usable AC power for running electrical devices and appliances and reduces the likelihood of tripping shorepower breakers Programmable: Configurable 3 stage temperature compensated battery charge algorithm for optimal charging of almost any battery type up to 18V Battery Equalization: Maximizes flooded battery life Dead Battery Charging Down to 0 Vdc Power Share: Prioritizes AC loads by reducing the charge current and maintaining the total input current to less than the breaker setting Easily configurable settings to charge any lithium-ion battery This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Freedom XC Pro 2000 Inverter/Charger - 2000W - 100A - 120V - 12V 2000 Watt pure sine wave inverter with 100 Amp built-in lithium-ion battery charger and transfer switch in a compact, lightweight footprint. Configure and monitor system performance via Bluetooth app available on the optional Bluetooth remote panel The Freedom XC PRO inverter/charger, supporting RV-C and J1939 protocols, is the most versatile and flexible AC power solution in the market today. It also features a 100 amp (2000W model) / 150 amp (3000W model) battery charger and offers all of the configurable features of the Freedom XC series inverter/charger in a compact, light weight package. It cranks out full output in invert or charge mode from -4°F (-20°C) - 104°F (40°C) for operation in all climate temperatures. The extended surge rating enables compressor loads such as an A/C or a fridge to start reliably. Features: Extended Surge Rating: Surges to 2X continuous power for 5 seconds for motor loads True Sine Wave AC Power: For operation of sensitive and motor loads Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis Built-in 50A AC Transfer Relay: Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power (shore or generator) Power Factor corrected Multi-Stage: Utilizes less shorepower when charging batteries. This frees up more usable AC power for running electrical devices and appliances Programmable: Configurable 3 stage temperature compensated battery charge algorithm for optimal charging of almost any battery type up to 18V Specifications: Continuous Power: 2000 Watts Continuous Current: 16.7 Amps Surge Power: 4000 Watts Frequency: 60 (or 50) Hz (selectable) Output Voltage: 108, 110, 120 Volts AC (selectable) Input Voltage: 12 Volts DC nominal Safety: ETL listed to CSA 107.1, UL458 (UL458 Marine Supplement with optional drip shield, part number 808-1050) Dimensions: 15.4" x 10.8" x 4.9" Unit weight: 17.1 lbs 2 year warranty

  Original Jump Starters - Standard JS6 & Heavy Duty JS12   - Long-lasting 12V Lithium-Ion batter - only loses 2% charge per month when stored! - Built-in safety protections - Pays for itself with just 1 use   Select The Model That's Right For YOU!   Weego's JS6 & JS12 are on sale now until November 30th, 2017.  Don't miss out on these great savings. Each unit comes paired up with either the Marine/Auto Tether or Powersports Tether.            Specials   Closeouts    Remanufactured    Rebates          

VHF FM Marine Transceiver - HX380   Now In Stock at CLR Marine!   Commercial VHF with LMR Channels Building on the success of the HX370S, the HX380 5W Commercial Grade handheld VHF has been upgraded with a 1600 mAh Lithium Ion battery, providing more than 13 hours of use on a single charge (5/5/90 duty cycle). The HX380 had been engineered for unparalleled reliability and exceeds the IPX7 waterproof standard for submersion, 3.3 feet or 1 meter for up to 30 minutes.       Specials     Rebates    Close Outs     Remanufactured

  The ProNautic Battery Charger from ProMariner is an award-winning charger with features that define the future of marine battery charging. Recognized with the 2010 IBEX Innovation Award, the ProNauticP combines digitally controlled and software-based power conversion technology with global energy management features to deliver global wide range AC input and power factor correction. This allows models to operate off standard household power connections anywhere in the world. The chargers address the trend of using greater numbers of 12-volt electronics on board today's power, sail, cruising and sport fishing boats. Featuring dual digital display screens, the ProNauticP series makes it easy to view real-time charging voltage, amperage and percentage of power out information. The ProNauticP charger automatically removes stress on a fully charged battery by incorporating a built-in conservation mode that reduces float voltage when the unit does not register a load greater than 5 amps over a 72-hour period and re-conditions batteries to improve battery life and reserve power performance every 21 days if in a storage state. ProMariner's Distributed-On-Demand Technology senses and distributes 100% of available charging to any one bank or a combination of all banks; all unused charging amps are distributed to batteries requiring them. The ProNauticP self-calculates absorption & conditioning time based on its ability to analyze the discharge state of the onboard battery banks and incorporates fully automatic temperature compensation as a standard feature on all models. The revolutionary ProNautic battery chargers are now in stock at CLR Marine! Available in amperages ranging from 10 to 60 amps.      Specials   Closeouts    Remanufactured    Rebates  

ECHOMAP™ UHD2 93SV LiveScope™ Plus Ice Fishing Bundle LI with ECHOMAP™ UHD2 93sv, LiveScope Plus System & Lithium-ion Battery Get improved resolution, reduced noise, clearer images, and better target separation with the LiveScope™ Plus Ice Fishing Bundle LI. It includes a 9-inch ECHOMAP™ UHD2 combo, the complete LiveScope Plus System with LVS34-IF transducer, swivel pole mount, and a lightweight lithium battery. Features: Get improved clarity, sensitivity, and Target Separation Scan surroundings with reduced noise and fewer sonar artifacts Use LiveScope™ forward mode so you know where to drill Use LiveScope™ down mode so you can keep an eye on your jig and the fish Fish longer with a 16.5AH lightweight lithium-ion battery Includes a rugged, portable carrying case LiveScope™ Forward sonar shows up to 200’ all around you and below the ice, so you can locate schools of fish and know where to drill the next hole LiveScope™ Down sonar shows live sonar images of what is below the ice, so you can watch fish respond to your jig Where you take your bundle is up to you. But the rugged, portable carrying case lets you easily transport it from hole to hole and season to season ECHOMAP UHD2 Combo Revolutionary real-time sonar pairs with a large 9-inch ECHOMAP UHD2 combo touchscreen display with a keyed assist, allowing you to see up to 200’ in any direction. Two Modes One Transducer LiveScope System offers two live-scanning sonar modes — Down and Forward. It features a transducer cable that stays flexible, even in freezing conditions Garmin Navionics+ Maps You get preloaded Garmin Navionics+ maps for exceptional detail on more than 23,000 U.S. lakes. Custom Combos  You can create custom pages that combine sonar, flashers, and maps on your display. Lithium Battery  Fish even longer with a lightweight 16.5Ah lithium battery that won’t weigh you down on the ice. In the Box: ECHOMAP™ UHD2 chartplotter (version depends on mapping selected) LVS34-IF transducer GLS™ 10 sonar module Ice fishing pole mount Tilt mount Power cable Portable fishing bag with handle Lithium-ion battery Battery charger Documentation General Specifications: Dimensions: 13.8 x 12.2 x 13.0 in. / 35 x 31 x 33 cm Touchscreen: Yes Input: Touchscreen with Keyed Assist Display Size: 7.8 x 4.5, 9.0" in. / 19.8 x 11.5, 22.9 cm Display Resolution: 1024 x 600 pixels Display Type: WVGA, IPS Weight: 22.5 lbs / 10.2 kg Waterproof: IPX7 Maps & Memory: Accepts Data Cards: 1 microSD™ card; 32 GB maximum size Waypoints: 5000 Track Points: 50,000 Tracks: 50 saved tracks Navigation Routes: 100 Ice Fishing Details: Battery Type, Size: Lithium-ion, 16.5Ah Bag Size: Extra Large (XL) Included Transducer: LiveScope™ Plus System with LVS34-IF Transducer Holding Feature: Pole mount Sensors: Has Built-in Receiver: Yes     Receiver: 10 Hz NMEA 2000 Compatible: Yes     GPS: Yes Glonass: Yes     Galileo: Yes   Beidou: Yes Supports Waas: Yes Supports Multi-Band, Multi-Constellation GPS: Yes Built-in Maps: Built-in Auto Guidance+: Yes (downloadable via ActiveCaptain app) Garmin Navionics+ Inland & Coastal: Yes (see Additional) Garmin Navionics+ (Inland): Yes (see Additional) Optional Map Support: Garmin Navionics+: Yes Garmin Navionics+ VIision+™: Yes TOPO: Yes     Standrad Mapping: Yes Garmin Quickdraw Contours: Yes Chartplotter Features:  ActiveCaptain® Compatable: Yes Electrical Features: Power Input: 9 to 18 Vdc Sonar Features & Specifications: Displays Sonar: Yes Power Output: 500 W Traditional Sonar (Dual Frequency/Beam): Built-in (single channel CHIRP, 50/77/83/200 kHz, L, M, H CHIRP) ClearVü™: Built-in 260/455/800/1000/1200 kHz SideVü™: Built-in 260/455/800/1000/1200 kHz Panoptix™ Sonar: Yes Livescope; Yes Connections: NMEA 2000® Ports: Yes Garmin Marine Network Ports: 1 12-Pin Transducer Ports: 1 Bluetooth® Pairing: Yes Ant+ (Connectivity): Yes Garmin Wi-Fi Network (Local Connection): Yes Additional: Garmin Navionics+ Inland & Coastal: 95sv Canada Garmin Navionics + (Inland): 95sv U.S. Lakes WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Blue Smart IP22 24VDC 16A 1 Bank 120V Charger - Dry Mount The Blue Smart IP22 Charger is the professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.  Bluetooth Smart The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test - bulk – absorption - recondition – float – storage The Blue Smart Charger features a microprocessor-controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as the temperature increases up to 50°C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION. Specifications: Input Voltage Range: 100 - 130 VAC Charge Current, Normal Mode: 8/12/16 A Charge Current, NIGHT or LOW: 4 / 6 / 8 A Efficiency: 94% No Load Power Consumption: 0.5 W Frequency: 45 – 65 Hz Number of Outputs: 1 Charge Voltage 'Absorption': Normal: 28,8V High: 29,4V Li-ion: 28,4V Charge Voltage 'Float': Normal: 27,6V High: 27,6V Li-ion: 27,0V Charge Voltage 'Storage': Normal: 26,4V High: 26,4V Li-ion: 27,0V Charge Algorithm: 6-stage adaptive Can Be Used as Power Supply: Yes Protection: Battery reverse polarity (fuse). Output short circuit, Over temperature Operating Temp. Range: -20 to +50°C Humidity (non-condensing): Max 98% Bluetooth: Frequency: - 2402-2480MHz / Power: -4dBm Enclosure Specifications: Material & Color: Aluminium (blue RAL 5012) Battery Connection: Screw terminals 13 mm^2 / AWG6 230 V AC Connection: Cable of 1,5 meter with CEE 7/7 plug, BS 1363 plug (UK) or AS/NZS 3112 plug (AU/NZ) Protection Category: IP22 Weight: 1,3 kg Dimensions (h x w x d): 235 x 108 x 65 mm Standards: Safety: EN 60335-1, EN 60335-2-29 Emission: EN 55014-1, EN 61000-6-3, EN 61000-3-2 Immunity: EN 55014-2, EN 61000-6-1, EN 61000 Automotive E4-10R Please contact your dealer for any returns, repairs or support issues related to this product. Please contact your dealer for any returns, repairs or support issues related to this product.

Charge Mate Pro Lithium 90 Current limited electronic charge relay with high efficiency and reverse current protection A secondary battery on board requires a dedicated charging solution. The Charge Mate Pro makes it possible to distribute the charger or alternator current effectively between two battery banks such as a starter and a service battery. The Charge Mate Pro connects both batteries during charging and keeps them isolated when discharging. This significantly reduces the risk of a flat starter battery for example. The Charge Mate Pro offers an additional advantage over mechanical charge relays, by limiting the charge current to the second battery. The primary battery, like a starter battery, is therefore charged with priority. The return current is automatically blocked even when the secondary battery has a higher voltage. An emergency start function is possible by connecting an optional bypass switch to the Charge Master Pro. A marine application example is the connection of a bow thruster battery to a service battery. The Charge Mate Pro ensures that the service battery is always charged with priority. The blocking of the return current from the bow thruster battery guarantees that the bow battery remains charged while the current limiting also prevents power dips in the onboard electrical network. The Charge Mate Pro series consists of a 40 Amp and a 90 Amp version, both suitable for charger or alternator applications. The Charge Mate Pro 90 ensures a higher charge current for example when charging Lithium-Ion batteries. It is also perfectly suitable for large automotive alternators up to 180 A and can be used in parallel operation with a 225 Amp alternator to fulfill even higher continuous power demands of your equipment on board. Charge Mate Pro: for controlled charging from a single source. Applications: Leisure and professional marine and mobile applications. An effective solution for high power demand on board and/or the need for prioritized or current limited charging. Features: Charges two battery banks from a single source. Electronic charge coupling with very low voltage drop. Makes effective dual charging possible. Suitable for Lithium Starter Batteries and AGM/GEL/Lithium Service Batteries Charge current secondary battery limited to 40A or 90A. High system reliability by prioritizing charging of the main battery. Unidirectional which blocks return current under all circumstances. Prevents power dips in the onboard electrical network. Suitable for all kinds of chargers and alternators. Monitoring with LED status indication. IP65 electronics in a corrosion-resistant casing with aluminum heat sinks. Fast and easy installation General Specifications: Monitoring: LED (warnings and status indication) Output current: Limited to 90 A Number of battery outlets: 2 Input voltage range: 9-32 V Parallel configuration: Yes Battery voltage: Automatic 12/24 V detection Remote switch functions: On, off, auto, start assist Dimensions, hxwxd: 157 x 140 x 80 mm/6.2 x 5.5 x 3.1 inch Weight: 0,88 kg/1.9 lb Compliance: CE Technical Specifications: Connection possibilities: 3 x fast-on connectors (switch, ground, and status) • switch: for an optional single pole ON-OFF-ON switch for remote operation • status: for an optional LED indicator Power consumption: Switch open: < 1 mA at 12/24 V DC Battery types: Suitable for charging from Lithium starter batteries to all types of batteries (for AGM/GEL starter battery applications, please use 83309002) Switch on voltage: 13.7 V (12 V) / 27.4 V (24 V) Switch on delay: 5 sec Switch off voltage: 13.3 V (12 V) / 26.6 V (24 V) Switch off delay: 2,5 sec Relay: Electronically (MOSFETs with a low voltage drop of max 0.2 V) Temperature range (ambient temp.): -40 °C to 60 Protection degree: IP65