Engine Shutdown - 5 Circuit with 20A Relays - Round Display  If a fire breaks out aboard a diesel powered vessel, the engine(s) must be shut down prior or during the discharge of a suppression system to effectively extinguish the fire.  Continued engine operation may remove the agent, lowering the concentration required to effectively extinguish the fire, making an Engine Shutdown System necessary.  Consisting of a Shutdown Control Module and Helm Display Unit with an Override Button the Fireboy Engine Shutdown Systems is an effective means to automatically shut down engines, generators, and blower systems in the event of a fire. Technical Specifications: Operating Voltage - 9 to 38 VDC Maximum Current Draw - 310mA @ 12 VDC Operating Temperature - 22°F (-6°C) to 158°F (70°C) Circuits - Five (5) with 20 Amp relays *Sold as an Individual 

Engine Shutdown - 5 Circuit with 20A Relays - Round Display for Volvo Engines If a fire breaks out aboard a diesel-powered vessel, the engine(s) must be shut down prior to or during the discharge of a suppression system to effectively extinguish the fire.  Continued engine operation may remove the agent, lowering the concentration required to effectively extinguish the fire, making an Engine Shutdown System necessary.  Consisting of a Shutdown Control Module and Helm Display Unit with an Override Button the Fireboy Engine Shutdown System is an effective means to automatically shut down engines, generators, and blower systems in the event of a fire. Features: For Volvo engines  Technical Specifications: Operating Voltage: 9 to 38 VDC Maximum Current Draw: 310mA @ 12 VDC Operating Temperature: - 22°F (-6°C) to 158°F (70°C) Circuits: Five (5) with 20 Amp relays *Sold as an Individual

Engine Shut Down System Features: 3 - 20 Amp Circuits 12/24 VDC Engine Shut Down System Round Display

8 Circuit Engine Shutdown with Time Delay - Round Display Features: Required for Diesel Engines Each engine shutdown display unit comes with: Integrated alarm horn Charged/discharged lights Override switch for restart or control of auto-shutdown Additional units and wire harnesses are available for a second station

CO Alarm Internal Battery w/Interconnect - Black A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces. The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream.  The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response. *Long sensor life – approximately 7 year end-of-life (EOL) Features: Interconnect up to ten (10) CO alarms - all connected CO alarms sound together  Microprocessor controlled Compact design for inconspicuous protection Time-weighted average CO measurement process constantly monitors all CO levels Highly resistant to most chemicals, solvents & cleaners CMD6-MD Internal battery model uses included maintenance-free lithium-metal batteries.  No wiring and reduced labor and material costs to install.   Technical Specifications: Power Usage - None Alarm Point - 10% COHb Alarm Horn - 85 dBA Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm) Interconnect Functionality - Yes *Sold as an Individual 

CO Alarm Internal Battery w/Interconnect - White A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces. The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream.  The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response. *Long sensor life – approximately 7 year end-of-life (EOL) Features: Interconnect up to ten (10) CO alarms - all connected CO alarms sound together  Microprocessor controlled Compact design for inconspicuous protection Time-weighted average CO measurement process constantly monitors all CO levels Highly resistant to most chemicals, solvents & cleaners CMD6-MD Internal battery model uses included maintenance-free lithium-metal batteries.  No wiring and reduced labor and material costs to install.   Technical Specifications: Power Usage - None Alarm Point - 10% COHb Alarm Horn - 85 dBA Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm) Interconnect Functionality - Yes *Sold as an Individual 

3 Circuit Engine Shutdown with Square Display   Designed for low-current, electronically controlled engines. Featuring sealed relays with gold-plated contacts and is guaranteed to operate in all electronic engine applications. Engine circuit relays feature an operating range of 10 µA to 2 amps. Auxiliary relays have an operating range of 100 mA to 10 amps for the shutdown of generators, dampers, louvers, and other types of related engine room equipment.  Features: 2-2A gold-plated relays Water-resistant display Includes 3 ft. cable Specifications: Relay Ratings (2A): 2 Relay Ratings (20A): 1 Helm Display: Square DU-SBH-20

MA Series Fire Extinguishing System - 450 Cubic Feet Fireboy-Xintex clean agent fire extinguisher systems are designed to automatically discharge whenever the protected space's ambient temperature reaches 175 degrees Fahrenheit. When the Fireboy System discharges, the extinguisher is designed to fully empty the HFC-227ea (Heptafluoropropane) and 3M Novec Clean Agent in less than 10 seconds.  No clean-up is required.  There is no powdery residue or water left behind.  The fire is extinguished by a combination of heat reduction and chemical reactions. *Diesel-powered craft require installation of an Engine Shutdown System  Features: Protects engine rooms and machinery spaces  Pre-engineered, total flooding system The safest way to combat an engine room fire Automatic discharge at 175°F (79°C) with optional manual release Utilizes HFC-227ea and 3M Novec clean agents – an effective Halon replacement No water or powdery residue Includes locking lever for increased safety when removing or installing cable Certifications: U.S.C.G. EN ISO 9094-1 and 9094-2 standards  ISO RINA MCA Certified Factory Mutual  Technical Specifications: Volume Protected - 450 ft3 Dimensions (Dia. x H) - 7.1" x 19.4" (18 x 49.3 cm) Agent - HFC-227ea and 3M Novec Agent Weight - 19.4 lbs (8.8 kg) System Pressure (@70°F) - 240 psi In the Box: Fire extinguisher Mounting bracket Helm station panel - 90107 Owners manual  *Sold as an Individual 

Deluxe Helm Display w/Gauge Body, LED & Color Graphics f/Engine Shutdown System - Black Bezel Display Features/Specifications: Compact Design 2-3/16" Round Black Bezel Simple Installation 9-30VDC Operating Temperature: -40°F to 185°F (-40°C to 85°C) Reverse Polarity Protected

Deluxe Helm Display w/Gauge Body, LED & Color Graphics f/Engine Shutdown System - Chrome Bezel Display Features/Specifications: Compact Design 2-3/16" Round Chrome Bezel Simple Installation 9-30VDC Operating Temperature: -40°F to 185°F (-40°C to 85°C) Reverse Polarity Protected

Deluxe Helm Display w/Membrane Switch, Remote Horn & LEDs f/Engine Shutdown System - Black Bezel Display Features/Specifications: Compact Design 2-5/8" Square Black Bezel Simple Installation 9-30VDC Operating Temperature: -40°F to 185°F (-40°C to 85°C) Reverse Polarity Protected

MU Series Horizontal Clean Agent Fire Extinguisher - 225 Cubic Feet As an enhancement to Fireboy's product line, the company has added this manual/automatic extinguisher designed specifically for horizontal mounting. This unit uses the FK-5-1-12 clean extinguishing agent and is designed for maximum firefighting efficiency when mounted in the horizontal position. Why Fireboy-Xintex is Needed: Continuous protection Automatic operation Manual operation with pull cable Peace of mind Often detects and suppresses a fire before it is known International system approvals (FM, USCG, CE, RINA, BV) FK-5-1-12 Clean Extinguishing Agent approved for marine use worldwide (EPA SNAP and European) Approved for Class B fires in engine rooms, machinery spaces, and similar industrial applications Applications:  Fire protection fluid with very low global warming potential (GWP <1) Low toxicity in a properly designed system (no harm to personnel) No damage to sensitive equipment Not targeted for emission reduction or phase-out Coverage from 25-485 ft3 (0.7-13.7 m3) for engine rooms, machinery spaces, and other enclosed spaces for Class B fires Factory Mutual and USCG Approved Don't Just Manage a Fire. Extinguish it. FK-5-1-12 clean extinguishing agent is a highly effective clean fire suppressant designed to extinguish a fire in its incipient stage before it has a chance to spread. The FK-5-1-12 clean extinguishing agent evaporates more than 50 times faster than water. Transitions from a liquid to a gaseous state very rapidly when discharged through a nozzle and readily achieves vapor-extinguishing concentrations in the air. Low toxicity (no harm to personnel) Extinguishes fires in less than half the time of CO2 and other inert gases No damage to sensitive equipment Not targeted for emission reduction or phase-out Ready to Install Each Fireboy system includes a heavy-duty powder-coated steel shelf bracket system, helm display, and owner’s manual. Specifications: Volume Protected: 225 ft.^3 (6.4 m^3) Diameter: 6.3 in. (160 mm) Agent Weight: 12.7 lbs. (5.8 kgs) Shipping Weight: 17.2 lbs. (8 kgs) System Pressure: 360 psi @70 degrees F

Propane Control & Solenoid Valve w/Black Bezel Display Minimize the risk of personal injury and possible explosions! Conveniently turn off the gas supply at the source with the push of a button when not in use. Features/Specifications: Compact Design 2-3/16" Round Black Bezel Solenoid Valve Simple Installation 9-30VDC Operating Temperature: -40°F to 185°F (-40°C to 85°C) Reverse Polarity Current Draw @ 12 VDC: Nominal:20mA / Maximum:650mA

Propane Control & Solenoid Valve w/Chrome Bezel Display Minimize the risk of personal injury and possible explosions! Conveniently turn off the gas supply at the source with the push of a button when not in use. Features/Specifications: Compact Design 2-3/16" Round Chrome Bezel Solenoid Valve Simple Installation 9-30VDC Operating Temperature: -40°F to 185°F (-40°C to 85°C) Reverse Polarity Current Draw @ 12 VDC: Nominal:20mA / Maximum:650mA

Gasoline & Propane Sensor Only This sensor is a replacement for Fireboy-Xintex P systems.  Installation: The sensor should be located by the propane-powered appliance, near the floor Avoid areas where damage may take place due to cleaning, mopping, kicking, or other physical damage Harsh chemicals should not be used to clean sensors Use the appropriate #8 mounting hardware to mount the Propane Fume Sensor in the desired location The rubber gasket should be installed between the sensor and the mounting surface Connect to the extension cable using the attached quick-disconnect connectors (Sold Separately)