|
Portable Solar Charging Kit - 90W
Samlex Portable MSK Charging Kits are easy to use! Just unfold, plug in and start charging. Capture the power of the sun without complicated installations, brackets or electrical diagrams. Each Kit comes with a convenient insulated carrying case that also protects the panels when stored.
Your Kit Includes:
3 x 30W Solar Modules for charging 12V Lead Acid Batteries
10 Amp Charge Controller
Includes a 2-pin bullet adapter for use in solar ready RV's
Protective carrying case
(Battery Not Included)
Features:
Solar panel is pre-wired with battery clamps for a quick and easy connection, 16’ cable
Turn the panel a few times per day and increase charging by 30%
Adjustable legs allow for maximum sun exposure
Folding crystalline panels in anodized aluminum frames, won’t rust
Built-in 10 Amp Charge Controller manages the charge to the battery and prevents overcharging
For 12V Lead Acid Batteries
Includes protective carrying case
NOTE: Battery is not included
Specifications:
Watts: 90 Watt Solar Module for 12V Lead Acid Batteries
Amps: 10 Amps
Weight: 25.2 (lbs)
Weight: 11.45 (kg)
Dimensions: 40.75 x 25.39 x 1.18 (in) Open
Dimensions: 1035 x 645 x 30 (mm) Open
Warranty: 10 Year Power Warranty on Solar Panels (Canada/US)
Applications:
Recreational Vehicles
Off-grid/mobile solar systems
Power supply for remote equipment
Water pumping systems
Rural electrification
Small home power systems
12V Lead Acid battery charging system
Other industrial and consumer applications
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
402.28 |
|
|
Portable Solar Charging Kit - 135W
Samlex Portable MSK Charging Kits are easy to use! Just unfold, plug in and start charging. Capture the power of the sun without complicated installations, brackets or electrical diagrams. Each Kit comes with a convenient insulated carrying case that also protects the panels when stored.
Your Kit Includes:
3 x 45W Solar Modules for charging 12V Lead Acid Batteries
10 Amp Charge Controller
Includes a 2-pin bullet adapter for use in solar ready RV's
Protective carrying case
(Battery Not Included)
Features:
Solar panel is pre-wired with battery clamps for a quick and easy connection, 16’ cable
Turn the panel a few times per day and increase charging by 30%
Adjustable legs allow for maximum sun exposure
Folding crystalline panels in anodized aluminum frames, won’t rust
Built-in 10 Amp Charge Controller manages the charge to the battery and prevents overcharging
For 12V Lead Acid Batteries
Includes protective carrying case
NOTE: Battery is not included
Specifications:
Watts: 135 Watt Solar Module for 12V Lead Acid Batteries
Amps: 10 Amps
Weight: 35.6 (lbs)
Weight: 16.18 (kg)
Dimensions: 59.65 x 24.41 x 1.18 (in) Open
Dimensions: 1515 x 620 x 30 (mm) Open
Warranty: 10 Year Power Warranty on Solar Panels (Canada/US)
Applications:
Recreational Vehicles
Off-grid/mobile solar systems
Power supply for remote equipment
Water pumping systems
Rural electrification
Small home power systems
12V Lead Acid battery charging system
Other industrial and consumer applications
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
473.69 |
|
|
Solar Charging Kit - 100W - 30A
Use a Samlex Solar Charging Kit to keep the batteries in your RV or utility vehicle charged and healthy. Add a DC-AC Power Inverter to your system and you can run all of your favorite household devices from anywhere!
The Samlex SRV-100-30A Solar Charging Kit comes with a high efficiency 100 Watt solar panel, a 30 Amp charge controller, connecting wires and aluminum mounting brackets and hardware that can be used to secure the solar panel to the roof of your remote structure or vehicle, or any other flat surface.
Every Charging Kit includes an SCC-30AB Charge Controller featuring:
Micro-processor control
30 Amp charging capacity
Battery equalization
Digital LCD display indicates voltage, current and battery AH
8 charge settings for different battery types
Optional remote temperature sensor
4 stage charging with LED indicators
Dual voltage capability 12V/24V
Features:
36 High-Efficiency Solar Cells
Special Aluminum Frame Design - The specially treated frame aluminum substantially increases module endurance against high winds and snow load
Reinforced Solar Glass - The high-transparency low-iron tempered glass allows maximum light permeability while enhancing stiffness and impact resistance
Advanced Cell Encapsulation - The interconnected cells are embedded in ultra transparent EVA with multilayer backsheets for additional weather protection
Optimized Module Surface Area - The distance between the frame edge and the cell circuitry iscalculated according to the electrical output optimization
Samlex 30A charge controller has battery equalization which restores battery capacity, revives efficiency and extends battery life. The digital display shows charging stage, voltage, current and battery Amp Hours. A single 30A controller can manage up to 500 Watts of total solar power. This charge controller has a 5 year warranty.
Aluminum mounting brackets are accompanied with leak-proof fasteners that expand to prevent moisture from getting inside your RV
Connecting wires are coated with UV protective material to combat weather decay
Specifications:
Watts: 100 Watt Solar Module
Amps: 30 Amps
Dimensions: 47.48 x 21.73 x 1.38 (in)
Dimensions: 120.6 x 55.2 x 3.5 (cm)
Warranty: 25 Year Power Warranty (Canada/US)
Applications:
Recreational Vehicles
Off-grid/mobile solar systems
Power supply for remote equipment
Monitoring systems for the oil & gas industry
Traffic, security, environment, and other remote monitoring and signaling systems
Water pumping systems
Rural electrification
Small home power systems
12V and 24V battery charging system
Other industrial and consumer applications
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
430.91 |
|
|
Solar Charging Kit - 150W - 30A
Use a Samlex Solar Charging Kit to keep the batteries in your RV or utility vehicle charged and healthy. Add a DC-AC Power Inverter to your system and you can run all of your favorite household devices from anywhere!
The Samlex SRV-150-30A Solar Charging Kit comes with a high efficiency 100 Watt solar panel, a 30 Amp charge controller, connecting wires and aluminum mounting brackets and hardware that can be used to secure the solar panel to the roof of your remote structure or vehicle, or any other flat surface.
Every Charging Kit includes an SCC-30AB Charge Controller featuring:
Micro-processor control
30 Amp charging capacity
Battery equalization
Digital LCD display indicates voltage, current and battery AH
8 charge settings for different battery types
Optional remote temperature sensor
4 stage charging with LED indicators
Dual voltage capability 12V/24V
Features:
High efficiency crystalline solar cells
Low profile panel design
All weather Anodized aluminum and Tempered Glass construction
25 year Power Warranty
Top quality cable & mounting hardware
Specifications:
Watts: 150 Watt Solar Module
Amps: 30 Amps
Dimensions: 57.91 x 26.22 x 1.38 (in)
Dimensions: 147.1 x 66.6 x 3.5 (cm)
Warranty: 25 Year Power Warranty (Canada/US)
Applications:
Recreational Vehicles
Off-grid/mobile solar systems
Power supply for remote equipment
Monitoring systems for the oil & gas industry
Traffic, security, environment, and other remote monitoring and signaling systems
Water pumping systems
Rural electrification
Small home power systems
12V and 24V battery charging system
Other industrial and consumer applications
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
481.37 |
|
|
MSK-EXT Extension Cable - 33' (10M)
Extension cable for use with MSK Series Portable Solar Charging Kits.
Features:
Extension cable for use with MSK Series Portable Solar Charging Kits
33 ft, 10m
Wire gauge AWG# 12
Connection: SB 50A, 600V
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
43.63 |
|
|
200W Solar Panel Kit
This kit has all the parts you need to start using solar in a few easy steps. Mix and match panels with Samlex Charge Controllers and accessories for a customized solar system. Can also be used to expand SRV Solar Kits.
The Samlex SSP-200-KIT comes with high efficient 200 Watt solar panel, connecting wires, and aluminum mounting brackets, and hardware that can be used to secure the solar panel to the roof of your remote structure or vehicle, or any other flat surface.
Features:
High efficiency crystalline solar cells
Low profile panel design
All-weather Anodized aluminum and Tempered Glass construction
Top-quality cable & mounting hardware
Specifications:
Watts: 200 Watts Solar Module
Applications:
Recreational Vehicles
Off-grid/mobile solar systems
Power supply for remote equipment
Monitoring systems for the oil & gas industry
Traffic, security, environment, and other remote monitoring and signaling systems
Water pumping systems
Rural electrification
Small home power systems
12V and 24V battery charging system
Other industrial and consumer applications
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
408.00 |
|
|
20A Solar Charge Controller - 12/24V
The MSK-20A is a 3-stage intelligent series-type PWM charge controller. It is based on an advanced design using a microcontroller for digital accuracy and fully automatic operation. It can be used for 12V or 24V battery systems.
Features:
3-stage intelligent Series Type PWM charging
Automatic battery voltage detection: 12V / 24V
100% input and output within -35 degrees C to +50 degrees C
Electronic protections: overheating, overcharging, over-discharge, overload, and short circuit
Reverse protection: any combination of solar module and battery
Optional MSK-TS External Temperature Sensor
Applications:
Recreational and service vehicles
Off-grid grid
Portable charging kits
Boats and marine crafts
Fieldwork or mobile offices
Telecommunications
Specifications:
Input: 12V / 24V
Amps: 20 amps
Weight: 0.66 (lbs)
Weight: 0.3 (kgs)
Dimensions: 6.28 x 3.2 x 1.89 in.
Dimensions: 159.6 x 81.4 x 47.88 (mm)
|
70.91 |
|
|
100W Solar Panel Kit
Every Samlex Panel Kit Includes:
High Efficiency Solar Panel
Pair of 20' Solar Connecting Wires
Mounting Brackets and Hardware
Branch connectors sold separately when expanding on an existing installation.
Features:
High efficiency crystalline solar cells
Low profile panel design
All weather Anodized aluminum and Tempered Glass construction
25 year Power Warranty
Top quality cable & mounting hardware
Applications:
Recreational Vehicles
Off-grid/mobile solar systems
Power supply for remote equipment
Monitoring systems for the oil & gas industry
Traffic, security, environment, and other remote monitoring and signaling systems
Water pumping systems
Rural electrification
Small home power systems
12V and 24V battery charging system
Other industrial and consumer applications
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
310.91 |
|
|
150W Solar Panel Kit
Every Samlex Panel Kit Includes:
High Efficiency Solar Panel
Pair of 20' Solar Connecting Wires
Mounting Brackets and Hardware
Branch connectors sold separately when expanding on an existing installation.
Features:
High efficiency crystalline solar cells
Low profile panel design
All weather Anodized aluminum and Tempered Glass construction
25 year Power Warranty
Top quality cable & mounting hardware
Applications:
Recreational Vehicles
Off-grid/mobile solar systems
Power supply for remote equipment
Monitoring systems for the oil & gas industry
Traffic, security, environment, and other remote monitoring and signaling systems
Water pumping systems
Rural electrification
Small home power systems
12V and 24V battery charging system
Other industrial and consumer applications
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
361.37 |
|
|
10A Solar Charge Contoller - 12/24V
Features:
Advanced micro-controller with Series Type PWM Charging
10A charging for 12V / 24V Lead Acid, Sealed AGM Batteries with auto mbattery voltage detection
10A rated load terminals with protection for low battery disconnect
Integrated battery voltage temperature compensation to prevent under/over charging
User friendly LED display for monitoring
Suitable for up to 160W panels for 12V battery / up to 320W panels for 24V battery
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
43.63 |
|
|
28" Adjustable Solar Panel Tilt Mount
Samlex Solar RV panel ADJ-28, tilt mounts are adjustable to fit any of the Samlex solar panels from the off-grid Solar Charging Kits.
Features:
Convenient - Adjustable Solar Mounts
Light - Aluminum
Specifications:
Weight - 4.8 (lbs)
Weight - 2.17 (kg)
Dimensions - 28 x 1 x 1 (in)
Dimensions - 71.1 x 2.5 x 2.5 (cm)
Warranty - 2 Year Limited
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
102.54 |
|
|
Flush Mount Solar Charge Controller w/LCD Display - 30A
The Samlex 30 Amp Charge Controller regulates current and protects your batteries from over-charging. Features of this 4-stage Charger include: LED status indicators, digital LCD monitor and 8 charge settings for most battery types. Charging is further regulated with the optional DC-BTS-A-C Battery Temperature Sensor.
Features:
Pulse Width Modulated (PWM) charging – most efficient and effective way to charge batteries
4-stage battery charging: Bulk, Absorption, Float and manual / automatic Equalization
8 selectable battery charging profiles for easy setup
Temperature compensated charging with optional Temperature Sensor
Digital LCD Monitor for informative display of operational parameters and fault messages
Specifications:
Input: 12V / 24V
Amps: 30 Amp
Weight: 0.8 (lbs)
Weight: 0.36 (kg)
Dimensions: 7.5 x 4.25 x 1.5 (in)
Dimensions: 19.1 x 10.8 x 3.8 (cm)
Warranty: 5 Year Limited
Applications:
Recreation vehicles
Service vehicles
Boats
Field work
Telecommunications
Mobile offices
Construction sites
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
120.00 |
|
|
Solar Charge Controller - 12/24 PWM - 30 AMP
Use the Samlex EVO-30AB Charge Controller as a stand-alone 30 amp solar charge controller or expand the functionality of the EVO-RC-PLUS as the central display for both your EVO inverter/charger and your solar system.
Features:
When connected to the EVO™ inverter/charger, the EVO-30AB will follow the programming set in the unit.
Add the EVO-RC-PLUS and it will display the status for both the EVO™ inverter/charger and solar system from ONE remote display
Compatible with most battery types including Lead Acid and Lithium-Ion (LiFePO4) batteries.
Manage multiple panels up to 600W in a 12V system, or up to 1000W in a 24V system under specified conditions
Additional Features:
Optional 30AB-TS Battery Temperature Sensor available.
30 Amp charging capacity
8 charge settings for different batteries
Selectable battery equalization option
Use with 12/24V batteries
Compatible with EVO-RC-PLUS Remote Display (Optional)
Increased functionality when used with an EVO™ Series Inverter/Charger
Specifications:
Input: 12V / 24V
Amps: 30 Amp
Weight: 0.8 (lbs)
Weight: 0.36 (kg)
Dimensions: 4.81 x 1.87 x 4.15 (in)
Dimensions: 12.21 x 4.75 x 10.54 (cm)
Applications:
Recreation vehicles
Service vehicles
Boats
Fieldwork
Telecommunications
Mobile offices
Construction sites
|
99.54 |
|
|
Solar Panel Branch Connectors
Connect the solar panels in parallel. Includes (1) male and (1) female. Use to expand SRV solar charging kits with SSP solar panels
Features:
Easy to install
"Snap-in" type of safety locking tabs
Contacts are sealed against the ingress of dust and water
Connects panels in parallel
Use to expand SRV solar charging kits with SSP solar panels
Specifications:
Weight: 0.2 (lbs)
Weight: 0.09 (kg)
*Included with the SPB-SHARE400 and SPB-ENJOY600 Solar + Power Bundles
|
52.78 |
|
|
Solar Charge Controller - 12V - 8A
The SCC-1208L Charge Controller is Micro-controller based for automatic, intelligent operation designed for 12 V nominal solar panels and 12 V battery systems. It has 3 Stage charging (Bulk, Absorption, Float) for 100% return of capacity and long battery life. It can be used with 2 types of batteries: Flooded/Web Cell or Sealed AGM. The SCC-1208L can manage up to 150 Watts of Solar Power.
Features:
Micro-controller based for automatic, intelligent operation
Designed for 12V nominal solar panels and 12V battery systems
3 Stage charging (Bulk, Absorption, Float) for 100% return of capacity and long battery life
For use with 2 types of batteries: Flooded/Wet Cell or Sealed AGM
Totally sealed, splash proof weather resistant design (Ingress Protection Rating IP65)
Automatically turns on lights when dark and turns off during the day
Mosfet based reverse current blocking prevents night-time battery discharge and lowers power loss
Protections: Overload, Over-Temperature, Battery Under/Over Voltage, Reverse Polarity
Wide operating temperature range of -40°C to + 60°C
Specifications:
Input: 12V
Amps: 8 Amps
Weight: 0.28 (lbs) / 0.13 (kg)
Dimensions: 3.8 x 1.8 x 1.0 (in)
Dimensions: 9.65 x 4.57 x 2.54 (cm)
Safety: FCC, CE, IP65
Warranty: 5 Year Limited
Applications:
Off-grid mobile rural systems
Rural electrification
Power supply for remote equipment
Monitoring systems for the oil & gas industry
Traffic, security, environment, and other remote monitoring and signaling systems
Water pumping systems
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
49.91 |
|