|
Amp 1L w/ White Cone - Black
The tiny Amp 1L packs an impressive spot beam.
Waterproof to 100M (330ft) and equipped with a large carabiner loop, this handheld light is ready for any conditions and easy to clip onto gear. The Amp 1L comes with a snap on translucent cone to turn it into a marker light, hanging lantern or area light.
When you are done exploring, the Amp 1L will still be your favorite piece of gear with its built-in bottle opener.
Features:
Built in Bottle Opener
Large Carabiner Loop
Removable Cone
Specifications:
Power - 100 Lumens
Lamp - 1 Maxbright LED
Burn Time - 7.4 Hours
Batteries - 2 AAA Alkaline (Included)
Weight - 2oz or 57g
Water Resistant - IPX8
Modes - Spot High
Warranty - Lifetime
*Sold as an Individual
WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
18.07 |
|
|
Amp 1L w/ White Cone - Neon Yellow
The tiny Amp 1L packs an impressive spot beam.
Waterproof to 100M (330ft) and equipped with a large carabiner loop, this handheld light is ready for any conditions and easy to clip onto gear. The Amp 1L comes with a snap on translucent cone to turn it into a marker light, hanging lantern or area light.
When you are done exploring, the Amp 1L will still be your favorite piece of gear with its built-in bottle opener.
Features:
Built in Bottle Opener
Large Carabiner Loop
Removable Cone
Specifications:
Power - 100 Lumens
Lamp - 1 Maxbright LED
Burn Time - 7.4 Hours
Batteries - 2 AAA Alkaline (Included)
Weight - 2oz or 57g
Water Resistant - IPX8
Modes- Spot High
Warranty - Lifetime
*Sold as an Individual
WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
18.07 |
|
|
Princeton Tec - Proudly Made In The USA Since 1975
Light makes anything possible. It’s a symbol of hope and innovation. It’s also a daily necessity for everyone from backpackers to firefighters. For over 40 years, Princeton Tec has pushed the limits of possibility with reliable, durable lights that shine bright in every situation. Princeton Tec will be on sale this March. Don't miss out on these super savings coming soon!
From The Backcountry To The Background Durable lights for every outdoor activity. Choose from lanterns, handhelds, headlamps, markers, and bike lights, all made in the USA since 1975.
See The Depths In A Whole New Light Waterproof lights built to handle any condition. Choose from handhelds, headlamps, marker lights, and packs, all made in the USA since 1975.
Accessories & Replacement Princeton Tec shines a light on some of the world’s most extreme places and conditions. Check out all of the accessories and replacement parts they offer.
Specials Closeouts Remanufactured Rebates
|
|
|
keywords: Princeton Tec, Princeton Lights, Princeton Lighting, Princeton Headlamps, Princeton bike lights, Princeton Dive lights
|
|
|
Princeton Tec
Princeton Tec has been pioneering new technologies and building lights for more than three decades. They have consulted great athletes, scaled mountains, touched ocean floors and rolled two wheels on every continent. Princeton Tec's spirit pushes technology and design, so that it can be ensured that you have, not only the best lighting solutions, but solutions where technology is applied and the performance makes sense for how you use them.
|
|
|
1" APEX Head & Crown Strap - Black
This Genuine Princeton Tec cloth-elastic headlamp strap is the perfect replacement for your Apex, Apex Pro, Apex Rechargeable and Apex Extreme Headlamps, as well as the discontinued Yukon and Corona headlamp models.
Features:
Water Resistant - IPX4
Color - Black
*Sold as an Individual
WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
5.46 |
|
|
Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - White LED - Stainless Steel Bezel - 12V
Attractive, energy efficient lighting for interior and exterior use.
Hella Marine round LED courtesy lamps can be installed almost anywhere on board.
Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.
Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.
Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.
Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Rim Material: UV resistant plastic. 316 stainless steel
Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 120mm of single core marine cable
Operating Voltage: 12V DC or 24V DC
Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 50g (including cable)
|
31.90 |
|
|
Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - White LED - White Plastic Bezel - 12V
Attractive, energy efficient lighting for interior and exterior use.
Hella Marine round LED courtesy lamps can be installed almost anywhere on board.
Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.
Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.
Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.
Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Rim Material: UV resistant plastic. 316 stainless steel
Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 120mm of single core marine cable
Operating Voltage: 12V DC or 24V DC
Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 50g (including cable)
|
27.34 |
|
|
Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - Warm White LED - Stainless Steel Bezel - 12V
Attractive, energy efficient lighting for interior and exterior use.
Hella Marine round LED courtesy lamps can be installed almost anywhere on board.
Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.
Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.
Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.
Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Rim Material: UV resistant plastic. 316 stainless steel
Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 120mm of single core marine cable
Operating Voltage: 12V DC or 24V DC
Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 50g (including cable)
|
31.90 |
|
|
Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - Blue LED - Stainless Steel Bezel - 12V
Attractive, energy efficient lighting for interior and exterior use.
Hella Marine round LED courtesy lamps can be installed almost anywhere on board.
Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.
Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.
Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.
Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Rim Material: UV resistant plastic. 316 stainless steel
Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 120mm of single core marine cable
Operating Voltage: 12V DC or 24V DC
Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 50g (including cable)
|
31.90 |
|
|
Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - Red LED - Stainless Steel Bezel - 12V
Attractive, energy efficient lighting for interior and exterior use.
Hella Marine round LED courtesy lamps can be installed almost anywhere on board.
Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.
Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.
Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.
Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Rim Material: UV resistant plastic. 316 stainless steel
Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 120mm of single core marine cable
Operating Voltage: 12V DC or 24V DC
Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 50g (including cable)
|
28.86 |
|
|
Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - Red LED - Black Plastic Bezel - 12V
Attractive, energy efficient lighting for interior and exterior use.
Hella Marine round LED courtesy lamps can be installed almost anywhere on board.
Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.
Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.
Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.
Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Rim Material: UV resistant plastic. 316 stainless steel
Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 120mm of single core marine cable
Operating Voltage: 12V DC or 24V DC
Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 50g (including cable)
|
21.26 |
|
|
Polished Stainless Steel Rim LED Courtesy Lamp - Blue
Attractive, energy efficient lighting for interior and exterior use.
Hella Marine round LED courtesy lamps can be installed almost anywhere on board.
Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.
Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.
Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.
Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Rim Material: UV resistant plastic. 316 stainless steel
Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 120mm of single core marine cable
Operating Voltage: 12V DC or 24V DC
Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 50g (including cable)
|
31.90 |
|
|
Caprera3 Spreader Light - White Dimming - Black Housing
Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.
Features:
The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.
Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control.
Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.
Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.
Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.
Specifications:
COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum
LUMENS: 1,200+ TRUE measured lumens
VOLTAGE: 10-30vDC
12VDC: 1A
24VDC: 0.5A
CCT: 5000
CRI: 70+
BEAM PATTERN: Flood
|
121.16 |
|
|
Capri3 Spreader Light - White Dimming - Black Housing
Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.
Features:
The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.
Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control.
Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.
Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.
Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.
Specifications:
COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum
LUMENS: 1,200+ TRUE measured lumens
VOLTAGE: 10-30vDC
12VDC: 1A
24VDC: 0.5A
CCT: 5000
CRI: 70+
BEAM PATTERN: Flood
|
121.24 |
|