|
2-In-1 Non-Adjustable Rod Holders *2-Pack
These two rod holders have a fixed vertical angle to optimize rod positioning and a smaller size is perfect for medium and light action gear.
Features:
Rod throat opening fits most standard and ultra-light rods up to 1-3/16 inches in diameter
The locking ring fits the spinning reel handle shanks up to 7/16-inch diameter
Specifications:
Mount: Side
Color: Black
*Includes two-rod holders
|
17.57 |
|
|
Convertible 2 in 1 Drink Holder sized to fit can drinks with insulated sleeves. Space saving unit conveniently opens to hold two drinks when needed. I.D. 3.4” Overall Height 4.6”. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
27.00 |
|
|
Convertible 2 in 1 Drink Holder sized to fit can drinks or 20 oz plastic soft drink bottles. Space saving unit conveniently opens to hold two drinks when needed. I.D. 2.9” Overall Height 4.6”. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
27.00 |
|
|
Heavy-Duty Adjustable Rod Holder with Combo Mount - White
This rod holder is designed for use with baitcasting and spinning reels.
Features:
An ergonomic design and easy-to-find rapid-release latch
Large, easy-grip lock-nut that offers an easy 180-degree vertical adjustment range for a variety of rod tip height settings
Specifications:
Color: White
*Sold as an Individual
|
18.29 |
|
|
Heavy Duty Adjustable Rod Holders
Features an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180x vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods. Includes Combo Mount.
|
18.29 |
|
|
Heavy Duty Adjustable Rod Holders
Features an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180° vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods.
|
17.33 |
|
|
Rail Mount Adjustable Rod Holder Fits Diameter 1-11/16" - Formed & Cast 316 Stainless Steel
This Rail Mount Rod Holder can accommodate rods up to 1-11/16” in diameter. Features a front mount adjustment screw, allowing easy adjustment without having to disassemble the rail mount brackets. Designed to fit 7/8” to 1” diameter tubing. A leash on the rod and/or reel is recommended when using rail mount rod holders. Constructed of corrosion resistant formed and cast 316 stainless steel with black plastic end cap.
|
67.44 |
|
|
ShadeFin Adjustable Rod Holder Mount
Lightweight and versatile, the Adjustable Rod Holder Mount for ShadeFin makes adding shade to your boat easy! Sliding the gimbal-slot butt end over the rod holder’s gimbal pin makes a secure, quick connection. A beveled, nylon sleeve is included, in the instance the rod holder opening is oversized for the mount’s shaft. Verify that the gimbal slot on the mount is mated with the pin in the rod holder, or Adjustable Telescopic Gunnel-Mount, insert the ShadeFin, adjust to your preferred shade angle and enjoy.
Features:
Manufactured from Type-316L stainless steel
Features soft-touch knob for easy and secure angle adjustment
Adjusts every 15º with safety detents
Gimbal-slot butt end for secure rod holder placement
Features white nylon sleeve for additional rod holder stabilization
Includes self-aligning notch and pin-locking hole
1-year limited warranty
|
318.43 |
|
|
Adjustable Rod Holder Extender
Provides the option for you to position your Scotty Rod Holder into that perfect fish fighting location. Conveniently position your rod holder closer to you on your kayak or your downrigger to eliminate reaching for your rod. Can be used in conjunction with any previous Scotty Downrigger Boom Mounted Rod Holder to bring the fish fighting action closer to you.
Extends the height of a rod holder by 6-1/2"
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
15.17 |
|
|
Heavy Duty 2 AWG 1/4" Tinned Lug - 25-Pack
Ancor Marine Grade lugs are manufactured from 100% heavy-duty annealed tinned copper, providing for maximum current flow while resisting corrosion from salt and moisture. Seamless barrel design allows for maximum strength when crimped. Closed end design seals out moisture so cables stay dry and corrosion free.
100% Tinned Copper
UL 486A
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
36.26 |
|
|
BURKS 350GA6-2-5 1/8, PUMP AND MOTOR
UNSPSC Code: 40150000
|
3792.41 |
|
|
Ultimate 2-in-1 Lounge & Caddy - Hibiscus Flip
This Aqua-Leisure lounge chair is perfect for relaxing and catching a tan.
Features:
Ultimate Comfort—lounge or tanner
The dual-position backrest lets you choose a recliner or tanner relaxation
Accessory caddy holds drinks, lotion, and more
Caddy attaches to the left or right side of the lounge
Oversized tubing evenly supports your body
Comfortable Cool Weave® mesh fabric covers the lounge and seating area, keeping you cool on the water’s surface
Convenient drink holder and carry handles
Easily inflates and deflates with the DuoLock™ Inflation System
With its wire-free design, the lounge folds for portability and storage
Inflated size is 56” L x 36” W (142cm x 91cm)
Weight capacity is 250 lbs.
Ages 15 and up
Choose Your Relaxation!
Recliner Position - Backrest Up/Caddy Out
Tanner Position - Backrest Down/Caddy In
|
32.66 |
|
|
Convertible 2 in 1 Drink Holder
This is sized to fit can drinks with insulated sleeves. Space saving unit conveniently opens to hold two drinks when needed. I.D. 3.6” Overall Height 4.5”. Comes with universal mounting bracket which allows the use of a variety of accessories in one location. Mounting bracket permanently mounts to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
31.00 |
|
|
SnapIt! Marine P004CR Small Convertible 2 in 1 Drink Holder
This is sized to fit can drinks or 20 oz plastic soft drink bottles. Space saving unit conveniently opens to hold two drinks when needed. I.D. 2.9” Overall Height 4.5”. Comes with universal mounting bracket which allows the use of a variety of accessories in one location. Mounting bracket permanently mounts to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
31.00 |
|
|
Active Imaging 2-in-1 Transducer
Active Imaging Transducers
Active Imaging is a new scanning sonar technology that provides incredibly detailed, high resolution imaging sonar without sacrificing any range
Active Imaging transducers accomplish this by better directing the SideScan beams which increases resolution and improves range performance
Active Imaging is available in two models
The Active Imaging stand alone transducer lets the user combine the new Active Imaging transducer with a separate CHIRP transducer for dual transducer installs.
Active Imaging operates at 800kHz or 455kHz with maximum ranges of 150ft (800kHz) or 300ft (455kHz)
Active imaging Technology
Active Imaging utilizes the latest techniques in sonar signal generation
Active Imaging transducers are constructed of a polymer that reacts to sound waves more closely to water. This ensures that no sonar signal is lost during transmit or receive
Active Imaging transducers include separate sonar elements for SideScan transmit and receive Separating transmit and receive allows Active Imaging to have an incredibly fast ping speed (Ping speed directly correlates to image resolution). Additionally, these separate elements focus more of the sonar signal outwardly, increasing the sonar signal to the sides and leading to better range performance
Key Features:
Active Imaging sonar offers no compromise high resolution detail to users
800kHz operation covers many use cases and ranges.
With 800kHz range and resolution capabilities users do not need to choose between seeing in High detail or seeing far
High resolution IPS screens of NSS evo3 and HDS Live show the full image, allowing the user to see the entire underwater environment
Active Imaging transducers do not require any modules or extra hardware for use with next-generation displays
Environmental
Operating temperature: -15°C to +55°C (+5°F to +131°F)
Storage temperature: -30°C to +70°C (-22°F to +158°F)
Physical
Cable length: 7.6 m (25 ft)
Mounting options: Transom, flush step, and jackplate mounting
Connector: 9 pin
Transducer
Output: SideScan imaging, DownScan imaging and temperature
Frequency: 455 kHz and 800 kHz
Max depth: DownScan: 91 m (300 ft): SideScan: 91 m (300 ft) side range at 455 kHz, 46 m (150ft) side range at 800 kHz
Operating speed: DownScan and SideScan: 9 knots (10 mph)
|
298.80 |
|