|
Handy-Mate Utility Pump
Beckson's Handy-Mate pumps can be used around the home, car, RV or anywhere to handle routine and emergency pumping jobs. They are designed to handle all the routine pumping jobs, plus the unusual ones. They can pump water out of bilges, sump tanks and from one tank to another, or pump oil from inboard or stern drive or engine crankcases when it needs changing. A tube is provided to insert into the dipstick hole and the oil is quickly pumped out. The especially versatile 216PC pumps come with a kit of tubes, hoses, reducing foot and adapter. The Handy Mate is made entirely of tough marine plastic. It will not rust or corrode, is non-sparking for safety, and requires no priming to start pumping action. The pump body has a diameter of 1-1/2" (38mm), and it is fitted with a comfortable molded handle for easy, no-strain operation.
Features:
Length: 16" (40.6cm)
Diameter: 1-1/2" (38mm)
Pumps: 10 oz./stroke
Two intake tubes:
36" (91.4cm) long x 1/2' (13mm)
1/4" (7mm) x 36" (91.4cm) w/adptr
Flexible hose for water discharge:
1-1/4" (45mm) x 24" (61cm)
Red discharge tube for oil:
1-1/4" (45mm) x 10" (25mm)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
42.23 |
|
|
Thirsty-Mate Hand Pump
The Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.
Features:
Angled top sleeve
Contoured red tee handle
Non-conductive material
Self-priming plunger valve
Special polyvinyl grey body and shaft
Removable foot valve for cleaning
Self-priming
Solvent welded construction
Will withstand temperature to 120 degrees F (49 degrees C)
Length: 24"
Diameter: 1-3/4"
Strokes/Gal: 6
Capacity: 10GM
Hose Length: 24"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
39.23 |
|
|
Thirsty-Mate Hand Pump
The Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.
Features:
Angled top sleeve
Contoured red tee handle
Non-conductive material
Self-priming plunger valve
Special polyvinyl grey body and shaft
Removable foot valve for cleaning
Self-priming
Solvent welded construction
Will withstand temperature to 120 degrees F (49 degrees C)
Length: 24"
Diameter: 1-3/4"
Strokes/Gal: 6
Capacity: 10GPM
Hose Length: 72"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
52.04 |
|
|
Thirsty-Mate High Capacity Super Pump
The Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.
Features:
Angled top sleeve
Contoured red tee handle
Non-conductive material
Self-priming plunger valve
Special polyvinyl grey body and shaft
Removable foot valve for cleaning
Self-priming
Solvent welded construction
Will withstand temperature to 120 degrees F (49 degrees C)
Capacity: 30 gal/min
Length: 33"
Diameter: 3"
Stroke Length: 19"
Intake Hose: 4'
Outlet Hose: 6'
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
326.08 |
|
|
Thirsty-Mate High Capacity Super Pump
Coast Guard Approved for commercial use
Manufactured to exceed the original requirements of Coast Guard regulation No. 519C. The specifications of this regulation were later reduced when no hand pump other than Beckson's could pass the test requirements. Still "over built" to Beckson's higher standard.
Length: 24"
Diameter: 3"
GPM: 22
Inlet Hose: 36"
Outlet Hose: 120"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
487.06 |
|
|
Handy Boy Utility Pump
Versatile polished brass multi-purpose hand pump
Drain, fill or top up engine and gearbox oil
Overcomes problem of hard to reach drain plugs and filler caps
Oil and corrosion resistant brass neoprene construction with up to 1 1/2 GPM output
1001 other uses on any boat
WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
89.14 |
|
|
BURKS GA6-1.5MV-5-11/16, PUMP END ONLY with VITON SEAL
UNSPSC Code: 40150000
|
2297.58 |
|
|
Raritan PHII PUMP Phii Pump Assy Complete
|
468.75 |
|
|
Check all of your impellers contained within the engine cooling pumps, bilge pumps, ballast pumps, and so on. One of the biggest contributors to impeller deterioration and damage is sitting idle in the same position for several months, so a proper check of the impeller(s) is vital to a reliable operation of the boat after storage and/or no operation.
Replacing an impeller is a fairly easy and straightforward process and one that you have probably done in the past. It is important to use the right tool to remove an impeller from the pump. Channel lock or needle-nose pliers are fine, but using an impeller removal tool is the best choice. Never use a screwdriver to pry an impeller out of a pump; you could accidentally score the bronze housing which can lead to leaks. Make sure you know how the impeller is being held in place. Some are sealed to the shaft with an O-ring; others are held in place with a set screw and others with a c-clip.
Make sure to check the pump and the water lines for any trash or chunks of rubber that may have broken off from the impeller. Even the smallest blockage can cause major engine cooling and overheating issues. Also, remember to properly lubricate your new impeller with Vaseline or the lubricant included with the new impeller. This will reduce friction for a brand new impeller on a dry startup.
Most importantly, make sure you are using the right impeller for the application. We have seen many instances of people who have replaced an impeller with something that is close to the original, but not exactly right, and this can cause major problems for the engine once normal operation resumes. You cannot match the size of the used impeller to a new one to determine the replacement, as a used impeller can be swollen and disfigured from its original specifications. The best method is to obtain the impeller number off of the impeller itself, usually located on the edge of the shaft hole of the impeller, or obtain the part number of the pump, usually stamped into the bronze housing.
You can find just about every impeller that needs to be replaced at CLR Marine. We carry Sherwood, Jabsco and Globe just to mention a few. We also carry many of the miner and major rebuild kits for many pumps. A minor repair kit consists of the impeller and any gaskets or O-rings that may be needed to replace the impeller. Our major rebuild kits include everything to rebuild that pump except for the shaft. All kits are put together at time of order so you will always see the Quantity on Hand as 0.
|
|
|
Soft-Mate Mini Radio Holder
Beckson's Soft-Mate Mini Radio Holder holds smaller handheld GPS units, radios, and cell phones. The safety-soft flexible PVC holder won't hurt the user or the equipment.
The Soft-mate mini radio holder is also a good place to store eyeglass cases, pens, pencils, or calculators. The unit is designed for boat and land vehicle and will find many useful places around the home.
HH-81 measures 4-3/4" high, 2-3/4" wide, 2" deep
|
11.99 |
|
|
Soft-Mate Mini Radio Holder
Beckson's Soft-Mate Mini Radio Holder holds smaller handheld GPS units, radios, and cell phones. The safety-soft flexible PVC holder won't hurt the user or the equipment.
The Soft-mate mini radio holder is also a good place to store eyeglass cases, pens, pencils, or calculators. The unit is designed for boat and land vehicle and will find many useful places around the home.
HH-81 measures 4-3/4" high, 2-3/4" wide, 2" deep
|
20.86 |
|
|
Siphon-Mate Siphon Pump
Specialty Transfer Pump
Safety experts caution against the unsafe practice of siphoning petroleum by mouth, warning specially, that it can result in loss of life. Beckson's answer is the patented Siphon-Mate pump; a combination displacement lift pump and siphon pump with valves suitable for transferring fuel. Pump half strokes to start flow. Once flow begins, fully extending the handle will allow siphoning provided that the source is higher in elevation than the receptacle.
Supplied with clear tubing to allow versatile application. Cut tubing for desired length of intake and discharge hose. When finished siphoning or pumping flammable liquids, be sure to drain siphon pump of liquid before storing. This pump not intended for transfer of liquid over 120 degrees F (49 degrees C) nor solvents that will attack PVC.
Features
Use for diesel, oil, water
Length: 11-1/2" (28.4cm)
Diameter: 1-1/4" (32mm)
Lifts: 4 oz (.12 L) per stroke
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
43.88 |
|
|
Thirsty-Mate Hand Pump with 20" Hose
The Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.
Features:
Angled top sleeve
Contoured red tee handle
Non-conductive material
Self-priming plunger valve
Special polyvinyl grey body and shaft
Removable foot valve for cleaning
Self-priming
Solvent welded construction
Will withstand temperature to 120 degrees F (49 degrees C)
Length: 18"
Diameter: 1-1/4"
Strokes/Gal: 10
Capacity: 6GM
Hose Length: 20"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
32.80 |
|
|
Thirsty-Mate Hand Pump
The Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.
Features:
Angled top sleeve
Contoured red tee handle
Non-conductive material
Self-priming plunger valve
Special polyvinyl grey body and shaft
Removable foot valve for cleaning
Self-priming
Solvent welded construction
Will withstand temperature to 120 degrees F (49 degrees C)
Length: 36"
Diameter: 1-3/4"
Strokes/Gal: 4
Capacity: 13GPM
Hose Length: 36"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
46.88 |
|
|
Thirsty-Mate Hand Pump
The Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.
Features:
Angled top sleeve
Contoured red tee handle
Non-conductive material
Self-priming plunger valve
Special polyvinyl grey body and shaft
Removable foot valve for cleaning
Self-priming
Solvent welded construction
Will withstand temperature to 120 degrees F (49 degrees C)
Length: 36"
Diameter: 1-3/4"
Strokes/Gal: 4
Capacity: 13GPM
Hose Length: 72"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
58.09 |
|