4" In-Line Blower Inlet/Outlet - 4" CFM - 240 Johnson Pump in-line blowers provide ventilation for bilges, engine compartments, galleys, and heads. Made from high quality ABS plastic construction, corrosion resistant motors, and premium electrical connections completes these blowers Five blade, quiet, highly efficient, and reliable operation will provide years of long life Compact and with mounting feet makes it easy to install on any flat surface

3" In-Line Blower Inlet/Outlet - 3" CFM - 158 Johnson Pump in-line blowers provide ventilation for bilges, engine compartments, galleys, and heads. Made from high quality ABS plastic construction, corrosion resistant motors, and premium electrical connections completes these blowers Five blade, quiet, highly efficient, and reliable operation will provide years of long life Compact and with mounting feet makes it easy to install on any flat surface

Rule In-Line Blower - 4" Ducting Part Number: 240 Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, Rule® in-line blowers provide higher air flow, lower amp draw, and quieter operation than standard blowers. For International & US Markets. Features Efficient high-volume air flow Quiet operation Low amp draw Slip-on inlet and outlet ducting connections Sealed motor shaft for moisture protection Corrosion resistant nickel-plated motor housing IMCI (CE) USCG 183.410 Compliant: Ignition protected Applications: Race cars and helmet ventilation Bus ventilation (engine and bathroom fumes) Prison van ventilation (cooling, air-freshening) Blow-up signs and mascots Tanning booths Building ventilation Specifications Approvals: CE Dimensions (H x W x D): 102 x 152 x 106 (mm) ElectricalCharacteristics: 4.3 Amp Flow Rate (US gallons & litres): 235 CFM @ Open Flow Fuse Size: 7 (amp) Product Inlet Fitting: 4" (102 mm) Ducting Product Outlet Fitting: 4" (102 mm) Ducting Voltage: 13.6 (Vdc) WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Rule In-Line Blower - 3" Ducting Part Number: 140 Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, Rule? in-line blowers provide higher air flow, lower amp draw, and quieter operation than standard blowers. For International & US Markets. Features Efficient high-volume air flow Quiet operation Low amp draw Slip-on inlet and outlet ducting connections Sealed motor shaft for moisture protection Corrosion resistant nickel-plated motor housing IMCI (CE) USCG 183.410 Compliant: Ignition protected Applications: Race cars and helmet ventilation Bus ventilation (engine and bathroom fumes) Prison van ventilation (cooling, air-freshening) Blow-up signs and mascots Tanning booths Building ventilation Specifications Approvals: CE Dimensions (H x W x D): 76 x 127 x 81 (mm) ElectricalCharacteristics: 2.9 Amp Flow Rate (US gallons & litres): 135 CFM @ Open Flow Fuse Size: 4 (amp) Product Inlet Fitting: 3" (76 mm) Ducting Product Outlet Fitting: 3" (76 mm) Ducting Voltage: 13.6 (Vdc) WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

1.1 Pump/Faucet Combo - 12V Chrome plated brass faucet (includes compression fitting hardware) Integrated 35 psi shutoff pressure switch Lower power consumption (2.5 amps at 12 volt) Quiet operation and self priming 12 Volts

Gear Pump with Oil Change Kit 80-47508-01 GP8-19 12V Light and compact oil change pump with pump body and gears made of PTFE. Complete with oil dip stickextraction tube 6 and 8 mm (0.236" and 0.315"). 180 cm (70.9") connection wires with baterry clamps. Port connection: Outlet: 14 mm (0.551") hose Inlet: 8 mm (0.315") hose Self priming: Up to 1 m (3.28 feet) Capacity: 8 l/min (2.11 GPM) Dimension: 140 x 80 mm (5.51" x 3.15") Weight: 1.1 kg Fuse size 12V: 8 A

Aqua Jet WPS 5.2 - 12V Quiet and pulsation-free even at low speeds, the Aqua Jet five-chamber diaphragm pump provides the perfect water pressure solution for both small and medium sized leisure and commercial boats. Features Whisper quiet operation Five-chamber construction Self-priming Easy, low cost maintenance Quick-connect hose or threaded connectors available Pressure switch standard Long service life

CM90 Circulation Pump - 17.2GPM - 12V - 3/4" Outlet CM90 circulation pumps are a line of compact magnetic driven centrifugal pumps which combine high flow rates with very low electric current consumption. Suitable for fresh water, ethylene glycol and salt water circulation. Glass-fiber reinforced PPA body. Specifications: System Pressure:-0.3 to 3.0 bar; stationary max. 4.0 bar Liquid: Water/glycol mixture; max. 60% glycol, fresh and salt water Motor service life: More than 5,000 hours at nominal voltage, 10,000 start/stops. Interchangeable motor Dry running: 30 minutes Dimensions: 244mm L x 120mm W x 150mm H Weight: 6.6lbs Capacity: 17.2 GPM Ports: 3/4"

AquaT Toilet Silent Electric Compact - 12V with Pump The fine finish and thought-through design of these toilets are remarkable. Made from white vitreous porcelain and with corrosion-resistant parts throughout, the AquaT is quiet and easy to clean. The silent electric model is shipped with a well-proven Aqua Jet diaphragm pump. The AquaT is far from ordinary. Quiet, hygienic, and reliable, the AquaT marine toilet is perfect for almost any marine toilet room.  Features: Compact electric marine toilet made from white vitreous porcelain Corrosion-resistant parts throughout Proven 12V Aqua Jet diaphragm pump Quiet, hygienic, reliable Two-way switch Weight: 21 lbs.

Twin Port Pumps 1250 GPH Offers the convenience of using only one intake for both the livewell and raw water wash down pump. The 3/4" tapered inlet connects directly to the sea cock and the upper outlet port provides a continuous flow of water through the 1-1/8" discharge to livewell. Does not include Dura-Port. while the lower outlet port connects to the wash down pump through either a 1/2" or 3/4" ports. High pressure inlet seal easily handles the higher pressures created by high speed pickups commonly used.

CM90 Circulation Pump - 23.7GPM - 12V - 1-½" Outlet A line of compact magnetic driven centrifugal pumps which combine high flow rates with very low electric current consumption. Suitable for fresh water, ethylene glycol and salt water circulation. System Pressure: -0.3 to +3.0 bar; stationary max. 4.0 bar Liquid: water/glycol mixture; max. 60% glycol, fresh and salt water Motor Service Life: More than 5,000 hours at nominal voltage 10,000 start/stops. Interchangeable motor. Motor, Voltage: Nominal 13.6V DC for use between 10-16V Nominal 27.2V DC for use between 20-32V Input Power: Max. 125W Dry Running: 30 minutes Dimensions: 244mm (L) x 120mm (W) x 150mm (H) Ports:Ø 20mm (3/4") & Ø 38mm (1-1/2") Weight: 3.0kg (6.6lbs) Body: PPA, glass-fiber reinforced Mounting: Separate universal bracket for flat surfaces

Flush Pump - 3.5 GPM - 12V w/Strainer An efficient and robust flush pump to be used with on-off switch for any marine 12V/24V toilet with external flushing pump system. Fits with all Silent Electric models. Delivers 13l/min/3.5 GPM.

AirV 4-550 Flex Mount - 12V Designed for engine compartment ventilation prior to engine start-up. AirV heavy duty blowers are designed for continuous duty and can therefore be used for air intake or extraction in bilges, galleys, accommodation and other compartments.

First Mate HP 400 GPH 12V - Threaded Port Submersible 400GPH Bilge Pump explicitly designed for Jet Ski, pontoon livewells, and PWC bilge applications where space is at a premium. Includes threaded discharge with 90-degree dura-port for easy routing. Specifications: Capacity (13.6V): 30 I/min - 400 GPH Amperage : 2.5A Fuse Size: 5A Connection (inch): 3/4"

Standard Electric Compact Macerator Style - 12V The Johnson Pump Aqua Marine Toilet has been designed to meet virtually every conceivable lavatory installation situation onboard. Priced competitively, the fine finish and well thought-through design of these toilets is remarkable. Made from white vitreous porcelain, and with corrosion resistant parts throughout, the Johnson Pump AquaT marine toilet, is quiet, robust and easy to clean. Using the Johnson Pump Aqua Marine Toilet, water inlet and outlet takes place in two distinct steps. First the bowl is filled with clear water, and then the waste is flushed, leaving the bowl empty and clean, with no liquids sloshing about. Naturally, automatic back-flow prevention is incorporated into the design. Most models can be ordered with standard, bevelled or low profiles in order to fit almost any hull and bulkhead configuration, and all are available in either compact or comfort versions so you can outfit your marine lavatory with the perfect-sized toilet, no matter what the layout. The Aqua Toilet will give you years of trouble free operation. When spare parts such as a new seat or valve are needed, you'll find Johnson Pump's global network of distributors at your service.Power models are shipped with well-proven Aqua Jet diaphragm pumps. It's probably fair to think of most toilets as commonplace products, but look at the features and you're sure to see that the Aqua is far from ordinary. Quiet, hygienic and reliable, the Johnson Pump AquaT marine toilet is perfect for almost any marine toilet room. CE-approved Features Whisper quiet operation Self-priming pump One push button on control panel Clean lines - pleasing to the eye Hygienic, easy-to-clean vitreous china bowl and exterior surfaces Robust wooden seat with durable baked enamel finish Low water consumption (2-2.5 l/flush) makes the most of holding tank capacity Versatile plumbing connection options Automatic back-flow prevention Available in comfort or compact bowl sizes Designed for virtually any onboard mounting position May be installed above or below the waterline Suitable for OEM or replacement installation Corrosion resistant materials throughout Long service life Equipped with 12V Aqua Jet pumps Quick-connect hose or threaded connectors Complies with ISO 8846, ignition protection, and EN 55014 EMC