|
3" Blower Flange Mounted - 12V
Features:
3" ducts
12V
100 percent factory tested
|
65.18 |
|
|
3 Way Bilge Pump Control
Switch panel that gives full control of your equipment. Just push the button for manual or automatic bilge pumping. The automatic feature operates in combination with the automatic bilge switches or the electronic float switch. The three-position switch panel in matte black finish has an integrated fuse holder and operating light. Fuses included. Size: 73 mm/2.99" x60 mm/2.17", 40 mm/ 1.57" depth.
|
37.03 |
|
|
3" In-Line Blower
Inlet/Outlet - 3"
CFM - 158
Johnson Pump in-line blowers provide ventilation for bilges, engine compartments, galleys, and heads.
Made from high quality ABS plastic construction, corrosion resistant motors, and premium electrical connections completes these blowers
Five blade, quiet, highly efficient, and reliable operation will provide years of long life
Compact and with mounting feet makes it easy to install on any flat surface
|
42.96 |
|
|
Johnson 10-35157-3 Engine Cooling Pump
FEATURES
Pump Body:
Bronze
Ports:
Threaded or Hose
Cam:
Full or 1/2
Impeller:
Neoprene
Shaft Seal:
2 Lip Seals
Drive:
Flange Mounted to Engine.
APPLICATIONS / CHARACTERISTICS
Flexible Impeller Engine Cooling Pump.
Requires (2) Johnson 01-43238 Clamps to Mount.
Johnson- Engine Cooling Pump Threaded Ports Full Cam F35B-9, Volvo 807368 833415 833522 833883
|
304.81 |
|
|
2 Way Bilge Pump Control
Switch panel that gives full control of your equipment. Just push the button for manual or automatic bilge pumping. The automatic feature operates in combination with the automatic bilge switches or the electronic float switch. The three-position switch panel in matte black finish has an integrated fuse holder and operating light. Fuses included. Size: 73 mm/2.99" x60 mm/2.17", 40 mm/ 1.57" depth.
|
32.59 |
|
|
F38B-19 Multi-Use Utility Pump - Capacity 9GPM / 35 L/MIN
With their high level of flexibility, the DC driven pumps from SPXFLOW Johnson Pump are ideally suited for use in boats as bilge pumps, deck wash pumps, fresh water pumps and refuelling pumps for oil and diesel. Not to be used for pumping paraffin or other thin petroleum products. These pumps may be combined with a vacuum switch for automatic operation. Not to be used for pumping paraffin or other thin petroleum products.
Perfect for bilge pumping, deck wash, water circulation, oil and diesel refueling at dockside service, etc. The motor has a built-in thermal overload for added protection.
Features:
Limited 3 Year Warranty
Typical applications: Bilge pump, fresh water pump, deck washing, fuel oil transfer, fire pump, oil change pump, etc.
Oil-resistant impeller
Self-priming
Easy maintenance
Handle debris (bilge pumping)
Self-priming
All motors are heavy duty to provide long service life even under heavy use
Available in 12 or 24 volts
Specifications:
Body: Bronze
Impeller: 09-824P-9
Seal: Lip seal
Connection: Hose 1" / +" NPT
Length: 180 mm - 7"
Width: 120 mm - 4.72"
Height: 90 mm - 3.54"
Weight: 3 kg - 6.6 lbs
|
207.41 |
|
|
Jabsco 50310-1001 Gear Driven Engine Cooling Pump
Pump Body: Bronze, Flange Mounted To Engine
Ports: 32mm, 1-1/4"
Shaft Seal: Mechanical Seal
Shaft: Tapered Shaft To Accept Engine Builder Supplied Gear
Gear Is Not Included
Found on Northern Lights (Luger) Generators and John Deere.
These same parts also fit the 30510-7001 pump.
|
787.16 |
|
|
Jabsco 9970-200 Pump for Perkins 4-107
Pump Body: Bronze Flange Mounted
Port Size: 3/4" BSP Thread (not NPT)
Impeller: Neoprene
Shaft Seal: Mechanical
Shaft: Stainless Steel
Flange Mounted Engine Cooling Pump
The 9970-200 model uses a short shaft with a coupling.
|
875.84 |
|
|
AquaT Toilet Electric - Comfort - 12V with Solenoid
Aqua T Toilets by Johnson Pump have been designed to meet virtually every conceivable lavatory installation situation onboard. Made from vitreous porcelain and corrosion resistant parts throughout, the Aqua T is quiet, robust and easy to clean.
|
414.82 |
|
|
Aqua Void 500 GPH Bilge Pump - 12V
With its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.
Experience the Industry-First Quick-Change Motor Connection
Johnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.
Take Control of the Boating Experience with Unparalleled Convenience
The Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.
Enjoy Enhanced Efficiency and Higher Flow Rate
Powered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.
Trust in Reliable Performance Under Demanding Conditions
Johnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.
Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!
Features:
Heightened efficiency with an increased flow rate - high-flow impeller design
Quick-change motor connection enjoys quick and hassle-free cartridge motor changes or capacity upgrades. Industry-first and only cartridge motor pump with included harness connection requiring no cutting and splicing of wires
Water-cooled motor for long service intervals
Compact, all-in-one motor/Impeller unit with stainless steel (316) Shaft
No tools are needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
Easy-to-install dura-port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
Include both a straight and a 90-degree smooth elbow dura-port as well as a removable check valve
Meets the international standard, ISO 8849 marine
Molded T-Slot - Easy Installation with Switches
Specifications:
Pump Size: 500 GPH
Capacity Straight (12V): 600 GPH (38 I/min)
Voltage: 12V
Amp: 2.7A
Fuse: 3.5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TAC
Weight: 11.2 oz (0.32 kg)
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm)
|
28.44 |
|
|
Aqua Void 800 GPH Bilge Pump - 12V
With its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.
Experience the Industry-First Quick-Change Motor Connection
Johnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.
Take Control of the Boating Experience with Unparalleled Convenience
The Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.
Enjoy Enhanced Efficiency and Higher Flow Rate
Powered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.
Trust in Reliable Performance Under Demanding Conditions
Johnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.
Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!
Features:
Heightened efficiency with an increased flow rate - high-flow impeller design
Quick-change motor connection enjoys quick and hassle-free cartridge motor changes or capacity upgrades. Industry-first and only cartridge motor pump with included harness connection requiring no cutting and splicing of wires
Water-cooled motor for long service intervals
Compact, all-in-one motor/Impeller unit with stainless steel (316) Shaft
No tools are needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
Easy-to-install dura-port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
Include both a straight and a 90-degree smooth elbow dura-port as well as a removable check valve
Meets the international standard, ISO 8849 marine
Molded T-Slot - Easy Installation with Switches
Specifications:
Pump Size: 800 GPH
Capacity Straight (12V): 795 GPH (50 I/min)
Voltage: 12V
Amp: 3.7A
Fuse: 5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TAC
Weight: 12.6 oz (0.36 kg)
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm)
|
37.44 |
|
|
Yamada NDP-20BPT-PP FLANGE Poly Teflon Pump Flanged
Yamada NDP-20BPT-PP-FLG Air Operated Double Diaphragm Pump - 3/4" Flange with Polypropylene Body and PTFE Diaphragms
NDP-20 series 3/4"" AODD pumps provide a maximum flow rate of 31.7 GPM and are available in Aluminum, Stainless steel (316), and Polypropylene.
NDP-20 SPECIFICATIONS
Fluid Port3/4"" NPT
GPM31.7
Discharge Volume Per CycleRubber 0.163 Gallons PTFE 0.143 Gallons
Air MotorMetal Pump - Aluminum Air Motor Plastic Pump - Non-Metallic
Intake & Discharge Connections
Polypropylene (PPG)3/4"" Female NPT or 3/4"" ANSI Flange B16.5 #150
Aluminum (ADC-12)3/4"" Female NPT
Stainless Steel (316)3/4"" Female NPT
Air Inlet 3/8"" Female NPT (includes ball valve)
Air Exhaust3/4"" Female NPT (includes silencer)
|
1161.60 |
|
|
Yamada NDP-25BPT-PP FLANGE Poly Teflon Pump Flanged
Yamada Pumps NDP-25BPT-PP Type, Model 854175 NDP-25 Series, Air Operated Double Diaphragm Pump, PTFE Diaphragm, PTFE Flat Check Valve / O-Rings, Polypropylene (PPG) - Non-Metallic Center Body Material, 46.2 GPM Max Flow, 1" NPT Fluid Port, 3/8" Female NPT (includes ball valve) Air Inlet, 3/4" Female NPT (includes silencer) Air Exhaust, Aluminum Air Motor, 18 Feet Max Suction Lift
Air Exhaust3/4" Female NPT (includes silencer)
Air Inlet3/8" Female NPT (includes ball valve)
Air Supply Pressure20 to 100 PSI (1.4 to 7 kgf/cm²)
DiaphragmPTFE
Discharge Volume Per Cycle0.17 gallons (654 cc)
Fluid Port1" NPT
Liquid Temperature180°F (82°C) Max
MaterialPolypropylene (PPG) - Non-Metallic Center Body
Max Cycles Per Minute210
Maximum Flow (GPM)46.2 GPM
Max Suction Lift18 Feet
Model Number854175
Model SeriesNDP-25 Models
MotorAluminum Air Motor
Solids (Inches)3/16" (4.8 mm)
Type854175
Valve / Seat / O-RingPTFE
|
1416.00 |
|
|
Electronic Float Switch 12v
Compact mechanical switch offers a combination of reliable solid state electronics and a sealed float switch. False start prevention, no mercury, high impact plastic and encapsulated electronics adds up to dependability. Activates pump at 2" water level, deactivates pump at 3/4" water level. 12V. Handles up to 15 amps.
|
44.68 |
|
|
Aqua Jet Wash Down Pumps
The new generation of wash down pumps - 12V DC. Quiet and pulsation-free, the new Aqua Jet five-chamber diaphragm pump from SPX Johnson Pump provides the perfect deckwash solution for both small and medium sized leisure and commercial boats. With a pressure of 5 bar, clean-up is faster and easier than ever before.
As a wash down pump, the Aqua Jet offers much higher pressures than competitive models, making clean-up faster and easier than ever before.
Complete with trigger nozzle, PUMProtector inlet strainer and hose connections for 1/2" hose. Both BSP and NPTconnections included in package.
CE-Approved
Features:
Whisper quiet operation
Five-chamber construction
Self-priming
Easy, low cost maintenance
Quick-connect hose or threaded connectors available
Inline strainer and trigger nozzle included as standard
Long service life
Capacity:13 l/min - 3.5 GPM
Pressure Cut Off: 5 bar - 70 psi
Fuse Size: 15 A
Connection:1/2" NPT / hose 3/4", GHT 3/4" ; 3/8" BSP x 1/2" barb,
Motor: WD 3.5 - 120 W, 12/24V DC
Body: PA/PPA
Valves: Nitrile
Diaphragm: Santoprene
|
162.96 |
|