|
Gianneschi FS 40/14FE 12V Clutch Pump
|
3772.98 |
|
|
Gianneschi FS 40/14FE 24V Clutch Pump 24V
|
3772.98 |
|
|
Gianneschi CP20-12V Bronze 12V Self-Priming Pump
Gianneschi CP-20-12V, CP Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.2KW (0.25 Horsepower), 2600 RPM, 12 Volts DC. Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch.
Applications for the CP2012V include liquid intake, grey water discharges, bilges, showers, diesel and oil, galleys, as well as in pumping seawater and fresh water. This pump is not suitable for viscous liquids or pumping abrasive liquids. Install the pump in a dry and well ventilated location.
The pump must be placed on a solid surface in the horizontal position, feet down. To reduce vibration block the machine with the bolts to the surface and install some vibration dumpers. These pump usually do not need any maintenance so long as the following precautions are taken. If there is a risk of freezing, it is necessary to empty the pump casing then fill the pump up before running it again. Make sure the pump never runs dry.
|
1252.88 |
|
|
Gianneschi ACB80E-12V Bronze 12V Self-Prime Pump
Gianneschi ACB80E-12V, ACB Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Brass impeller, 316 Stainless Steel Shaft. Motor is 0.45KW (0.6 Horsepower), 2600 RPM, 12 Volts DC. Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch.
Applications for the ACB80E12V include chain washing, fire fighting, pumping seawater and liquids with a high gas content, diesel and oil pumping, bilges, and any water supplying applications.
|
1680.43 |
|
|
Gianneschi ECOINOX-1-CE-12V Water System 12V
Main Water Pressure System features:
A valid substitute mechanical control
Compact size
Constant flow with variable water demand
Dry run protection
Jet type self priming el/pumps in bronze or s/steel
No accumulator tank needed
Pre-set pressure system (no adjustments need)
Reduced maintenance
Port Size: From 1'' to 1'' 1/2 BPS
|
1681.78 |
|
|
Gianneschi 15CE0 Control-Press 12V 1" 1.5Bar
|
459.78 |
|
|
Gianneschi ACB61E-12V Bronze 12V Self-Prime Pump
|
898.39 |
|
|
Gianneschi PM40 12V 1"BARBS Diaphragm Pump 12V 40Lpm 1"
|
708.96 |
|
|
Gianneschi ACB61E-24V Bronze 24V Self-Priming Pump
Gianneschi ACB61E-24V, ACB Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Brass impeller, 316 Stainless Steel Shaft. Motor is 0.18KW (1/4 Horsepower), 3200 RPM, 24 Volts DC. Inlet Port is 1/2 Inch, Discharge Port is 1/2 Inch.
Applications for the ACB61E24V include fire fighting, oil and diesel, bilges, chain washing, and in pumping seawater as well as any fluids with high air content.
|
849.68 |
|
|
Gianneschi CB 22-95 0.55KW Centrifugal Pump 230V 50/60Hz 1Ph
Gianneschi CB-22-95-230V, CB Series Centrifugal Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.37KW (0.5 Horsepower), 2900 RPM, 230 volts AC, Single Phase. Inlet Port is 1 Inch BSP Inlet, Discharge Port is 1 Inch BSP Outlet.
Applications for the CB2295230V include air conditioning systems, water supply, lifting fresh or salty water at sanitary plants, water circulations, increasing water pressure at water plants, pumping fresh water and seawater, and cooling and heating.
|
1416.18 |
|
|
Gianneschi CB 22-120 0.75KW Cent Pump 230V 50/60Hz 1Ph
Gianneschi CB-22-120-230V, CB Series Centrifugal Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.55 KW (0.75 Horsepower), 2900 RPM, 230 volts AC, Single Phase. Inlet Port is 1 Inch BSP Inlet, Discharge Port is 1 Inch BSP Outlet.
Applications for the CB 22-120-230V include air conditioning systems, water supply, lifting fresh or salty water at sanitary plants, water circulations, increasing water pressure at water plants, pumping fresh water and seawater, and cooling and heating. Before installation, ensure that mains supply is grounded in accordance with local legislation and corresponds to motor plate detail.
|
1694.69 |
|
|
Gianneschi JET-4B-24V Bronze Jet Pump
Gianneschi JET-4B-24V, JET Series Jet Pump and Motor unit, Bronze construction, Brass impeller, 316 Stainless Steel Shaft. Motor is 0.75 KW (1 Horsepower), 2900 RPM, 24 Volts DC.
Applications for the JET4B24V include marine applications to pump fresh water and seawater, diesel oil liquids, non inflammables and liquids without any suspended parts. Most common uses are for sanitary systems, water supply for water pressure system, deck and chain washing, and fire fighting. This pump is selfpriming, it must only be used with clean liquids.
This is NOT suitable for pumping flammable fluids or for use in explosion hazard areas.
|
2881.11 |
|
|
Gianneschi BMA 50/160 B1 Motor and Pump 230V 1Ph
Gianneschi catalog # BMA-50/160-B1-230V-, BMA Series Self Priming Centrifugal Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 2.2 KW (3 Horsepower), 2900 RPM, 230 volts AC, 50/60 Hz, Single Phase.
Applications for the BMA50/160B1230V include chain washing, air conditioners, emptying operations, bilges, cooling systems, OEM, fire fighting, ballasts, gray water systems, as well as swimming pool filling.
|
4800.04 |
|
|
Gianneschi CP20-24V Bronze 24V Self-Priming Pump
Gianneschi CP20-24V, CP Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.18KW (0.25 Horsepower), 2800 RPM, 24 Volts DC. Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch.
Pump Body: Bronze
Impeller: Bronze
Shaft: 316 Stainless Steel
Port Size: Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch
Motor Specs : 0.18KW (0.25 Horsepower), 2800 RPM, 24 Volts DC
|
1095.94 |
|
|
Gianneschi ECOINOX1 24 NEW SS Slf Prim 24 .30Kw
|
1095.94 |
|