|
The powder coated marine grade aluminum base contains a 1" diameter rubber ball connected at right angles to a 1.25" x 2.5" inch diamond plate. The base has two holes 1.912" from center to center, positioned at both ends of the diamond base.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
7.16 |
|
|
Quick Release Pin - 3/16" x 1.5" Grip
Quick Release Pin, 3/16" x 1.5" Grip. 316 Stainless Steel. Safe Working Load 1700 lbs.
|
9.66 |
|
|
Quick Release Pin - 5/16" x 1.5" Grip
Quick Release Pin. 5/16" x 1.5" Grip. 316 Stainless Steel. Safe Working Load 4600 lbs.
|
11.54 |
|
|
RAM 2-7/16" X 1-5/16" Base w/Ball
Part #: RAM-238U
The powder coated marine grade aluminum base contains a 1.5" diameter rubber ball connected at right angles to a 1.25" x 2.5" inch diamond plate. The base has two holes 1.912" from center to center, positioned at both ends of the diamond base.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
11.88 |
|
|
RAM Mount Large Tough-Claw Base w/Double Socket Arm & 1.5" Round Base A
dapter
The RAP-401-202U consists of the large Tough-Claw™ base, double socket arm and round base adapter. The RAM Tough-Claw™: is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" - 2.25" outer diameter. The round base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Clamping Range (Rail/Tube Surfaces):
1" to 2.25"
Clamping Range (Flat Surfaces):
0" to 2.2"
|
84.79 |
|
|
RAM 3.68" Diameter Base w/Ball
The (RAM-240U), marine grade aluminum base, consists of a 1.5" diameter rubber ball connected to a flat 3.68" diameter base. This base has pre-drilled holes that connects to RAM Tough-Dock Powered Docking Stations.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
20.66 |
|
|
Small Tough-Claw™ Base with Short Double Socket Arm & GoPro®/Action Camera Mount
The RAM-B-400-A-GOP1U consists of the Tough-Claw™ rail clamp base, SHORT length double socket arm and action camera mount. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. The GoPro/Action Camera Mount attaches directly to the under-side of the camera, replacing the factory mounting bracket.
Features:
Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5"
Clamping Range (Flat Surfaces): 0" to 1.14"
Material: High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size: 1" Rubber Ball "B" Size
Note: The "U" in the part number reflects product packaged in poly bag.\
Weight: 0.59 lbs.
|
50.59 |
|
|
Small Tough-Claw™ Base with Double Socket Arm & Universal X-Grip® Cell/iPhone Cradle
The RAM-B-400-UN7 consists of the Tough-Claw™ rail clamp base, STANDARD length double socket arm and universal spring loaded X-Grip® cradle for phones. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Features:
Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5"
Clamping Range (Flat Surfaces): 0" to 1.14"
Cradle Dimensions: Minimum Width = 1.875" (Minimum Height = 4.25"), Maximum Width = 3.25" (Minimum Height = 2.25"), Depth = 0.875"
Rustproof
High strength composite and stainless steel construction
Spring loaded cradle expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
Socket technology allows for multiple adjustment angles and articulation of device
Includes Tether for open cockpit and extreme environments
Lifetime warranty
Made in U.S.A.
Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size: 1" Rubber Ball "B" Size
Note: Part number reflects product packaged in clear clam shell for store shelf display. RAM highly recommends using the provided Tether for all open cockpit applications while using this product.
Weight: 0.95 lbs.
|
71.12 |
|
|
EZ-Roll'r™ Cradle with Ball for Apple iPad mini 1-3
The RAM-B-202-AP14U consists of a 2.5" round base adapter, with 1" ball, attached to a high strength composite cradle. The cradle includes a patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle.
Features:
Material: High Strength Composite & Powder Coated Marine Grade Aluminum
Ball Size: B Size 1" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag
Weight: 0.4 lbs.
|
20.74 |
|
|
Impeller Kit
Material:Neoprene
Drive Type:Key Drive
Number of Blades:12
Dimensions:
Diameter:2-7/16"
Shaft Width:5/8"
Shaft Diameter:1-1/4
Insert Material:Brass
Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.
Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.
Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.
Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such.
Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
38.74 |
|
|
Flush Mount 2-Pin Hinge
Length:2-13/16"
Width:1-9/16"
Depth:3/8"
Fastener:#8(6)
Material: 304 Stainless Steel
|
10.64 |
|
|
Latch-tite™ Stainless Steel 2-7/16" Square
Latch-tite™ handles have been designed to provide high performance, trouble free use in the most hostile conditions. The latches and all shafts and tongues are made from cast type 316 stainless steel. Square design enhance any marine craft. Latches can be installed vertically or horizontally, making them ideal for any opening.
The Latch-tite™ series is for applications that require a heavy-duty, high performance construction and high quality appearance.
Features:
Cast stainless steel
Type 316
Deluxe polish finish
Unique stainless steel shaft with bushing and twin Nitrile “O” rings for greater protection against water penetration
Over center anti-rattle handles provide quiet operation
Concealed fasteners
Mold plugs available upon request for boat builders
Adjustable depth
Specifications:
Dimensions: 2-7/16" x 2-7/16"
Edge Thickness: 5/32"
Adjust Depth: 1-3/4"
Hole Size: 2-1/16"
Overall Depth: 2-5/16"
Screw: #8
|
50.20 |
|
|
RAM 3.68" Diameter Base w/3-3/8" Ball
Part #: RAM-E-202U
The RAM-E-202U consists of a 3.38" diameter rubber ball, connected at right angles to a 3.68" diameter round plate. The plate has pre-drilled holes in the base plate, including two holes at 180 degrees and three holes at 120 degrees.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
3.38" Rubber Ball "E" Size
|
48.48 |
|
|
Goulds 2K1023-4 7/16 Impeller
|
723.75 |
|
|
TR5 w/Safety Pin - 7/16" Shackle
Features:
Perpendicular or parallel release directions
Hitch pin lock for device locking safety
Computer generated parts precision-cut from aerospace grade stainless steel plate
Low friction, low effort lanyard-style release for maximum user safety
On load/off load releasing
All parts 100% stainless steel
No springs
Break Load 16,618 pounds and SWL 3,323 pounds
WARNING: This product can expose you to chemicals including Titanium dioxide which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
591.08 |
|