RAM Adjustable Laptop Screen Support Arm Description: The RAM-234-S2U is a screen support arm with spring loaded keeper; this allows it to travel smoothly with the screen through numerous viewing angles. The screen support arm stores easily when not in use. Dimensions: Total Length: 8.75" Point Pivot to the end: 8" Material: High Stength Composite

Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

RAM Universal Drill-Down Laptop Mount Compatible Vehicles: Universal for All Vehicles This universal drill type Laptop Stand System installs quickly and easily into most vehicles by using self tapping screws, or by drilling and then bolting down the mount base to the vehicle. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics. Hardware to secure mount base to vehicle is not provided.

No-Drill™ Universal Laptop Mount The RAM® Universal No-Drill™ Laptop features a heavy-duty steel mounting base designed to fit a variety of vehicles. Using the front bench or passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle. The included RAM Tough-Tray™ is spring loaded to accommodate 10" to 17" laptops. The tray features four adjustable retaining arms with rubber grips. These arms can be moved both vertically and horizontally, enabling a custom fit for varying thicknesses of laptops and access to ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support phones or other electronics. Features: Custom, No-Drill™ mounting base offers lowest profile in the industry Patented ball and socket mounting system offers shock and vibration dampening Dual articulating swing arm offers the simplest and most comfortable adjustment points in the industry Combination Telescoping pole adjusts both height and swing with one knob Modular system makes changing your vehicle, or your device, simple and cost effective Ability to mount laptops, tablets and other devices using the same mounting system Universal Laptop Tray accommodates most laptops Specifications: Placement of Mount: Passenger side floor board, in front of seat Drilling Requirements: No - attaches to seat studs Seat Configuration: Bucket Material: High Strength Composite and Powder Coated Steel PRODUCT DIMENSIONS:  Height Range: 18.25" - 24" TRAY DIMENSIONS Width Range: 10" - 16" Side Arm Clamp Height: .5" - 1.75" Tray Depth: 10" Tray Thickness: 2.125" HOLE PATTERN Seat Bolt Distance: 9"-18.875" center to center BALL/SOCKET SIZE C Size (1.5")

No-Drill™ Vehicle Laptop System f/97-15 Ford Expedition This No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12" to 18". Dual swing arms provide articulation and 12" of reach for passenger and driver access to the mounted device. Rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray™ is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics. Compatible Vehicles: Ford Expedition (1997-2015) Ford Expedition King Ranch EL (2013) Ford Expedition Limited (2013) Ford Expedition Limited EL (2013) Ford Expedition Ranch EL (2013) Ford Expedition XLT (2013) Ford Expedition XLT EL (2013) Ford F-150 (1997-2003) Ford F-150 Heritage (2004) Ford F-250 Light Duty (1997-2004) Ford Windstar (2004-2007) Specs & Features Placement of Mount: Passenger side floor board, under seat Drilling Requirements: No - uses existing seat bolts Seat Configuration: Bucket/Bench Material: High Strength Composite and Powder Coated Steel Notes:If the Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-N-Motion™ kit. One 4" riser is included with this vehicle base. Step feature allows minimized amount of intrusion of passenger leg space. This base will not interfere with factory installed console in most installations.

Vehicle Base Compatible Vehicles: DODGE RAM 1500-5500 (2008-2011) This No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation Placement of Mount: Passenger side, front, where seat rail frame attaches to floor board. DRILLING REQUIREMENTS: No - attaches to seat studs Seat Configuration: Bucket Pole: Purchased Separately Weight: 2.1 lbs. Material: Powder Coated Steel Dimensions: A = 14.75", B = 3.8", C = 1.75", Hole Center = 13.25" Features: Quick installation with no drilling needed. Rock solid construction with lifetime warranty. Low profile keeps mount away from passenger leg space. Won?t interfere with levers or factory-installed console or 4WD lever. Designed to accommodate trucks with PTO Swing Arm The RAM RAM-VP-SW1-89, combination swing arm/tele-pole system, will connect to any RAM vehicle base without a welded female tele-pole. Included is a tele-pole with a height range from 11.5" to 17"; it can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the tele-pole becomes a rigid support for any RAM cradle, holder or Tough-Tray. The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM Vehicle Mount. Taking the highly successful RAM Vehicle Mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12". Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball "C" Size Note: Part number reflects product packaged in clear clam shell for store shelf display. Laptop Mount Tray The RAM Tough-Tray is spring loaded expandable tray that can accommodate 10 to 16 inch wide laptops. The tray includes four (4) side clamping arm with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS, PDAs or other electronics. Tough-Tray Dimensions: Tray Depth: 10.0" Tray Thickness: 2.125" Tray Width (Expansion): 10" to 16" Side Clamp Arm Height: 0.5" (min) to 1.75" (max) Material: High Strength Composite Note: Part number reflects product packaged in clear clam shell for store shelf display. The Tough-Tray is compatible with laptops that have 17" screens. If the Tough-Tray Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-n-Motion kit.

No-Drill™ Laptop Mount for '14-20 Ram Promaster + More This No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough-Tray™is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics. Features: Placement of Mount: Passenger side between seat track and seat frame box or floor board Drilling Requirements: No - attaches to seat studs Seat Configuration: Bucket Seats. The RAM-VB-129-A-SW1 will not work for bench/tube frame seats. For bench seat or tube frame seat model vehicles, consider the use of the RAM-VB-184T-SW1. Material: High Strength Composite and Powder Coated Steel C Size Compatible Vehicles Chrysler 300 (2011-2021) Dodge Challenger (2011) Charger (2005 2011-2021) Charger Police Package (2005 2011-2021) Magnum (2005) Magnum Police Package (2005) Sprinter Van (2007-2010) Freightliner Sprinter Van (2010-2017) Mercedes Sprinter Van (2010-2017) Ram Promaster (2014-2021) Promaster City (2014-2020) Important Note: If the Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-N-Motion™ kit.

No-Drill™ Laptop Mount w/ Adjust-A-Pole™ f/ The Dodge RAM 1500-5500 This No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray™ is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics. Compatible Vehicles: RAM 1500 (2012-2018) RAM 1500 Classic (2019-2021) RAM 2500-5500 (2012-2021) Placement of Mount: Passenger side, front, where seat rail frame attaches to floor board. Drilling Requirements: No - attaches to seat studs Seat Configuration: Bucket Material: High Strength Composite and Powder Coated Steel Notes: Low profile design limits intrusion on passenger side leg space. Base will not interfere with levers or factory installed console or 4WD lever. Base designed to accommodate trucks with power take-off (PTO.) If the Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-N-Motion™ kit.

No-Drill™ Laptop Mount Vehicle System for '17-20 Ford F-Series + More This RAM® No-Drill™ laptop stand system installs quickly and easily into a variety of Dodge, Ford, and Jeep vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12” to 18”. Dual swing arms provide articulation and 12” of reach for passenger and driver access to the mounted device. RAM® rubber ball and socket technology provides additional adjustability as well as shock and vibration isolation. The spring-loaded RAM® Tough-Tray™ laptop holder accommodates 10” to 16” wide laptops, and 17” wide screens. The tray features four adjustable retaining arms with rubber grips that can be moved both vertically and horizontally. These arms allow for a custom fit for laptops of varying thickness while not blocking drives or ports. A screen support and USB light are also available to accessorize the RAM® Tough-Tray™. In addition, hole patterns on the perimeter of the laptop holder are compatible with several RAM® mounting solutions.  Features: Placement of Mount: Passenger side, in front, where seat frame meets floor board Drilling Requirements: None. Utilizes existing vehicle mounting points and hardware Seat Configuration: Bucket Material: High Strength Composite and Powder Coated Steel Custom, No-Drill™ mounting base offers lowest profile in the industry Ball and socket mounting system offers shock and vibration dampening Dual articulating swing arm offers the simplest and most comfortable adjustment points in the industry Combination Telescoping pole adjusts both height and swing with one knob Modular system makes changing your vehicle, or your device, simple and cost effective Ability to mount laptops, tablets and other devices using the same mounting system Universal Laptop Tray accommodates most laptops Compatible Devices 10" to 16" Wide Laptops & (17" Wide Screens) Compatible Vehicles Dodge Journey (2011-2020) Ford F-150 (2015-2020) F-250-F-550 (2017-2020) Escape (2013-2019) Expedition (2018-2021) Transit Connect (2014-2021) C-Max (2014-2018) Focus (2011-2018) Raptor (2015-2020) Jeep Compass (2013-2021) Patriot (2013-2017)

RAM Mount No Drill Vehichle System f/Nissan NV1500, NV2500HD, NV3500HD &  Toyota Tundra This No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray™ is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens) The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics. Compatible Vehicles: Nissan NV1500 (2011-2021) Nissan NV2500 HD (2011-2020) Nissan NV3500 HD (2011-2020) Toyota Tundra (2007-2021) Features: Placement of Mount: Passenger side, front, where seat rail frame attaches to floor board. Drilling Requirements: No - attaches to seat studs Seat Configuration: Bucket Material: High Strength Composite and Powder Coated Steel Notes: If the Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-N-Motion™ kit.

RAM® No-Drill™ Laptop Mount f/ '19-21 RAM 1500 This RAM® No-Drill™ laptop stand system installs quickly and easily into the 2019 Dodge RAM 1500 using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12” to 18”. Dual swing arms provide articulation and 12” of reach for passenger and driver access to the mounted device. RAM® rubber ball and socket technology provides additional adjustability as well as shock and vibration isolation. The spring-loaded RAM® Tough-Tray™ laptop holder accommodates 10” to 16” wide laptops, and 17” wide screens. The tray features four adjustable retaining arms with rubber grips that can be moved both vertically and horizontally. These arms allow for a custom fit for laptops of varying thickness while not blocking drives or ports. A screen support and USB light are also available to accessorize the RAM® Tough-Tray™. In addition, hole patterns on the perimeter of the laptop holder are compatible with several RAM® mounting solutions. Specifications: Placement of Mount: Passenger side, front, where seat rail frame attaches to floor board Drilling Requirements: No - attaches to seat studs Seat Configuration: Bucket Material: High Strength Composite and Powder Coated Steel Notes: If the Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-N-Motion™ kit. Laptop base will fit under seat air duct in vehicles that have that option. Compatible Vehicles RAM 1500 (2019-2021)

RAM® No-Drill™ Laptop Mount for '19-21 Chevy Silverado 1500 & GMC 1500 This RAM® No-Drill™ laptop stand system installs quickly and easily into the 2019 Chevrolet All-New Silverado and GMC Next Generation Sierra using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12” to 18”. Dual swing arms provide articulation and 12” of reach for passenger and driver access to the mounted device. RAM® rubber ball and socket technology provides additional adjustability as well as shock and vibration isolation. The spring-loaded RAM® Tough-Tray™ laptop holder accommodates 10” to 16” wide laptops, and 17” wide screens. The tray features four adjustable retaining arms with rubber grips that can be moved both vertically and horizontally. These arms allow for a custom fit for laptops of varying thickness while not blocking drives or ports. A screen support and USB light are also available to accessorize the RAM® Tough-Tray™. In addition, hole patterns on the perimeter of the laptop holder are compatible with several RAM® mounting solutions. Specifications: Placement of Mount: Passenger side, in front, where seat frame meets floor board Drilling Requirements: No. Utilizes existing vehicle mounting points and hardware Seat Configuration: Bucket Material: High Strength Composite and Powder Coated Steel Features: Custom, No-Drill™ mounting base offers lowest profile in the industry Ball and socket mounting system offers shock and vibration damping Dual articulating swing arm offers the simplest and most comfortable adjustment points in the industry Combination Telescoping pole adjusts both height and swing with one knob Modular system makes changing your vehicle, or your device, simple and cost effective Ability to mount laptops, tablets and other devices using the same mounting system Universal Laptop Tray accommodates most laptops Compatibility Chevrolet Silverado 1500 (2019-2021) Silverado 2500 (2020-2021) Silverado 3500 (2020-2021) GMC Next Generation Sierra 1500 (2019-2021) Sierra 2500/HD (2020-2021) Sierra 3500/HD (2020-2021)

RAM® No-Drill™ Laptop Mount for 2019 Ford Ranger This RAM® No-Drill™ laptop stand system installs quickly and easily into the 2019 Ford Ranger using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12” to 18”. Dual swing arms provide articulation and 12” of reach for passenger and driver access to the mounted device. RAM® rubber ball and socket technology provides additional adjustability as well as shock and vibration isolation. The spring-loaded RAM® Tough-Tray™ laptop holder accommodates 10” to 16” wide laptops, and 17” wide screens. The tray features four adjustable retaining arms with rubber grips that can be moved both vertically and horizontally. These arms allow for a custom fit for laptops of varying thickness while not blocking drives or ports. A screen support and USB light are also available to accessorize the RAM® Tough-Tray™. In addition, hole patterns on the perimeter of the laptop holder are compatible with several RAM® mounting solutions. Specifications: Placement of Mount: Passenger side, in front, where seat frame meets floor board Drilling Requirements: No. Utilizes existing vehicle mounting points and hardware Seat Configuration: Bucket Material: High Strength Composite and Powder Coated Steel Features: Custom, No-Drill™ mounting base offers lowest profile in the industry Ball and socket mounting system offers shock and vibration damping Dual articulating swing arm offers the simplest and most comfortable adjustment points in the industry Combination Telescoping pole adjusts both height and swing with one knob Modular system makes changing your vehicle, or your device, simple and cost effective Ability to mount laptops, tablets and other devices using the same mounting system Universal Laptop Tray accommodates most laptops

No-Drill Laptop Mount for the Ford Econoline Van Compatible Vehicles: Ford Econoline Van (1995-2013) This No-Drill Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics. Placement of Mount: Attaches to the passenger side inner front and back seat studs Drilling Requirements: No - uses existing seat bolts Seat Configuration: Bucket Material: High Strength Composite and Powder Coated Steel Notes: The RAM-VB-119-SW1 will not fit in Cutaways that have seat belts mounted to the floorboard.

No-Drill Laptop Mount for the Chevrolet Express Van & GMC Savana Van Compatible Vehicles: GMC Savana Van (1998-2013) Chevrolet Express Van (1998-2013) This No-Drill Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics. Placement of Mount: Attaches between seat frame and floor board. Uses front and rear, inside seat studs Drilling Requirements: No - uses existing seat bolts Seat Configuration: Bucket Material: High Strength Composite and Powder Coated Steel