|
Compatible Vehicles:
Freightliner Trucks
International Trucks
Kenworth Trucks
Mack Trucks
Peterbilt Trucks
Volvo Trucks
This No-Drill™ Big Rig Laptop Stand installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray™ is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.
Material:
High Strength Composite and Powder Coated Steel
Notes:
If the heater box is under the seat, the installer may need to drill holes in the base to accommodate vehicle mounting holes or studs. Also, the heater box may cause the system to sit higher than normal. Pole may be cut down by installer to lower kit. This will not void the warranty. May not work with swivel style seats for big rigs
If the Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-N-Motion™ kit.
|
335.02 |
|
|
Compatible Vehicles:
Freightliner Trucks
International Trucks
Kenworth Trucks
Mack Trucks
Peterbilt Trucks
Volvo Trucks
Placement of Mount:
Passenger side on the floor, under front seat
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket/Bench
Material:
Powder Coated Steel
Weight:
10.8 lbs.
Features:
Quick installation with no drilling needed.
Notes:
If the heater box is under the seat, the installer may need to drill holes in the base to accommodate vehicle mounting holes or studs. Also, the heater box may cause the system to sit higher than normal. Pole may be cut down by installer to lower kit. This will not void the warranty. May not work with swivel style seats for big rigs.
|
129.30 |
|
|
RAM POD I Universal No-Drill Vehicle Mount with 18" Flex Rod & Diamond Adapter Base
Part #: RAM-B-316-1-238U
The RAM POD I, No-Drill vehicle mount, consists of a 1" ball and diamond base with 18" rigid flex rod. The flex rod base is designed to connect to a vehicle seat rail bolt in cars, trucks, fleet vehicles and suvs. The flex rod can hold light to medium weight items in your vehicle safely and securely.
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
35.32 |
|
|
RAM Mount No Drill Vehichle System f/Nissan NV1500, NV2500HD, NV3500HD &
Toyota Tundra
This No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation.
The RAM Tough Tray™ is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens)
The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.
Compatible Vehicles:
Nissan NV1500 (2011-2021)
Nissan NV2500 HD (2011-2020)
Nissan NV3500 HD (2011-2020)
Toyota Tundra (2007-2021)
Features:
Placement of Mount:
Passenger side, front, where seat rail frame attaches to floor board.
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Material:
High Strength Composite and Powder Coated Steel
Notes:
If the Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-N-Motion™ kit.
|
311.86 |
|
|
No-Drill™ Vehicle Base f/ '13-21 Ford Fusion + More
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Compatible Vehicles:
Ford
Edge (2007-2013)
Edge Limited (2013)
Edge SE (2013)
Edge SEL (2013)
Edge Sport (2013)
Fiesta (2015)
Fusion (2013-2021)
Placement of Mount:
Passenger side on the floor, under front seat
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Material:
Powder Coated Steel
Weight:
6 lbs.
Features:
Quick installation with no drilling needed
|
54.68 |
|
|
RAM POD I Universal No-Drill Vehicle Mount Connecting to No Ball Base
Part #: RAM-B-316-1U
The RAM-B-316-1U, universal RAM-POD I vehicle mount, consists of a single open socket arm, connected to a 18" long flexible rod. This RAM POD I allows you to mount a light to medium weight item in a car safely and securely.
Installation Instructions:
At right angles to the base of the flexible 18" long leg is a foot with a mounting hole. Simply place the hole into the passenger seat mounting bolt and adjust the mount to the required height with the flexible leg. The rigid flexible arm will hold everything you need safely and securely.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note: The "U" in the part number reflects product packaged in poly bag.
|
31.39 |
|
|
No-Drill™ Vehicle Base f/ '10-13 Ford Transit Connect + More
Compatible Vehicles:
Ford
Transit Connect (2010-2013)
Transit Connect Wagon Premiun (2013)
Transit Connect XL Van (2013)
Transit Connect XLT Van (2013)
Transit Connect XLT Wagon (2013)
Dodge
Grand Caravan (2008-2009 2012-2016)
Grand Caravan AVP (2013)
Grand Caravan Crew (2013)
Grand Caravan RT (2013)
Grand Caravan SE (2013)
Grand Caravan SXT (2013)
RAM C/V Tradesman Van (2014-2015)
Chrysler
Town & Country (2008-2009 2012-2016)
Placement of Mount:
Passenger side, front, where seat rail frame attaches to floor board
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Pole:
Purchased Separately
Weight:
4.5 lbs.
Material:
Powder Coated Steel
|
47.48 |
|
|
POD I Universal No-Drill™ Vehicle Mount with 24" Rigid Aluminum Rod & 1.5" Diameter Ball Round Adapter Base
The RAM POD I, universal no-drill™, vehicle mount is the latest in the Mobile In-Car range from RAM. This RAM POD I allows you to mount a light to medium weight item in a car safely and securely.
Features:
Installation Instructions: At right angles to the base of the flexible 24" long leg is a foot with a mounting hole. Simply place the hole into the passenger seat mounting bolt and adjust the mount to the required height with the flexible leg. The rigid flexible arm will hold everything you need safely and securely.
Material: Powder Coated Marine Grade Aluminum
Ball Size: 1.5" Rubber Ball Size
Note: The "U" in the part number reflects product packaged in poly bag
|
55.67 |
|
|
No-Drill™ Vehicle Base for '05-18 Toyota 4Runner & Tacoma
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Features:
Material: Powder Coated Steel
Placement of Mount: Passenger side on the floor, under front seat
Drilling Requirements: None - attaches to seat bolts
Seat Configuration: Bucket
Pole: Purchased Separately
Weight: 9.0 lbs.
Note: Quick installation with no drilling needed. Rock solid construction with a lifetime warranty. The RAM-VB-138 will not fit bench seat trucks. This base is not compatible with bench seat vehicles.
|
108.56 |
|
|
No-Drill™ Laptop Base f/ The Dodge RAM 1500-5500 - 2008-2015
Specifications/Features
Compatible Vehicles:
Dodge RAM 1500-5500 (2008-2015)
Placement of Mount:
Passenger side, front, where seat rail frame attaches to floor board.
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Pole:
Purchased Separately
Weight:
2.1 lbs.
Material:
Powder Coated Steel
Features:
Quick installation with no drilling needed. Rock solid construction with lifetime warranty. Low profile keeps mount away from passenger leg space. Won't interfere with levers or factory-installed console or 4WD lever. Designed to accommodate trucks with PTO
|
97.58 |
|
|
RAM® No-Drill™ Vehicle Base for 2019 RAM 1500
This heavy duty, steel RAM® No-Drill™ laptop vehicle base is custom-designed for the 2019 Dodge RAM 1500. Using the passenger side seat rail bolts as attachment points, provided hardware is used to secure the mounting base in the vehicle.
Specifications:
Placement of Mount: Passenger side, front, where seat rail frame attaches to floor board
Drilling Requirements: No - attaches to seat studs
Seat Configuration: Bucket
Pole: Purchased Separately
Material: Powder Coated Steel
|
46.96 |
|
|
RAM® No-Drill™ Vehicle Base for '20-22 Ford Police Interceptor Utility
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base with a universal design to fit the 2020-2022 Ford Police Interceptor Utility. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the mounting base in the vehicle. Compatible with RAM® Tele-Pole™ mounting systems to complete your in-vehicle solution.
Features:
RAM® No-Drill™ base offers low-profile mounting; designed specifically for the 2020-2022 Ford Police Interceptor Utility
Compatible with RAM® Tele-Pole™ mounting systems
Requires no drilling into the vehicle and installs on the passenger side using the existing seat bolts
Made of powder-coated steel
Backed by a lifetime warranty
Specifications:
Hardware Included: Foot Stabilizer
Hole Pattern: Seat Bolt Distance 12" Center to Center
Materials: Powder Coated Steel
|
40.13 |
|
|
No-Drill Laptop Mount for the Chevrolet Express Van & GMC Savana Van
Compatible Vehicles:
GMC Savana Van (1998-2013)
Chevrolet Express Van (1998-2013)
This No-Drill Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.
Placement of Mount:
Attaches between seat frame and floor board. Uses front and rear, inside seat studs
Drilling Requirements:
No - uses existing seat bolts
Seat Configuration:
Bucket
Material:
High Strength Composite and Powder Coated Steel
|
233.02 |
|
|
RAM® No-Drill™ Vehicle Base for '20-21 Ford Explorer
RAM® No-Drill™ mounting base for the 2020 Ford Explorer offers low-profile mounting; telescoping pole allows for height adjustments. The RAM® No-Drill™ laptop mounting base features a stabilizer foot and heavy-duty steel base custom-designed to fit the 2020-2021 Ford Ranger perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the mounting base in the vehicle.
Features:
Made of powder-coated steel
Backed by a lifetime warranty
Hardware Included:
Foot Stabilizer
(2) M10-1.5 x 75mm Hex Bolts
(2) 1.68" Stand-Offs
(2) 3/8" Fender Washers
|
54.61 |
|
|
No-Drill™ Laptop Base f/ '97-16 Ford F-250, F-350, F-450, F-550, F-650, F-750 & Excursion
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the front bench or passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Compatible Vehicles:
F-250 (1997-2016)
F-350 (1997-2016)
F-450 (1997-2016)
F-550 (1997-2016)
F-650 (1997-2018)
F-750 (1997-2018)
Excursion (2000-2005)
Placement of Mount:
Passenger side floor board, in front of seat
DRILLING REQUIREMENTS:
No - attaches to seat studs
Seat Configuration:
Bucket
Pole:
Purchased Separately
Material:
Powder Coated Steel
|
86.82 |
|