RAM Composite Twist Lock Suction Cup Mount with Short Arm and No Ball Base Ball Size: 1" Rubber Ball Material: High Strength Composite Color: Black

RAM Composite Twist Lock Suction Cup with Double Socket Arm and Diamond Base Adapter The RAP-B-166U consists of a double socket arm, 3.25" suction cup twist lock base and diamond base adapter. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the diamond base adapter will connect to most RAM cradles. Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. This mount does not require any drilling for installation.

RAM Composite Twist Lock Suction Cup Mount with Universal X-Grip Cell Phone Holder The RAP-B-166-2-UN7U consists of a 2.75" twist lock suction cup base, double socket system and universal spring loaded X-Grip holder for cell phones. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included X-Grip cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip holder expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip is the cell phone holder evolved. Compatible Devices: Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case Apple iPhone (1st Generation) Apple iPod touch (All Models) Apple iPod (G1-G5) The X-Grip holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Holder Dimensions: Minimum Width = 0.875" (Devices at 0.875" must be a minimum of 4" in height to fit into holder) Maximum Width = 3.25" Depth = 0.875" Features: Spring loaded holder expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable Versatility of holder allows for attachment to many RAM-to-RAM ball mounts Single socket technology allows for multiple adjustment angles and articulation of device Material: High Strength Composite and Rubber Tips Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Twist Lock Suction Cup with Short Arm and Diamond Adaptor The RAM-B-166U-A, twist lock suction cup mount consists of a 3.25" suction cup locking base, SHORT double socket arm and diamond base end. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Simply attach the suction cup base to the windshield of your vehicle for an easy and safe way to view your handheld device in your vehicle. High quality materials ensure your electronic device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your mobile device. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. This mount does not require any drilling for installation.

RAM® Twist-Lock™ Suction Cup Mount for Apple iPad mini 4 & 5  Ideal for aircraft windshields, the RAM® EZ-Roll'r™ cradle is designed specifically for a caseless Apple iPad mini 4 and iPad mini 5 consisting of a 3.3" diameter RAM® Twist-Lock™ suction cup base and medium-length double socket arm. The mount is designed with a RAM® 1" diameter B size patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles.  Features: RAM® EZ-Roll'r™ cradle specifically designed for a caseless Apple iPad mini 4 and iPad mini 5 Includes RAM® Twist-Lock™ suction cup base for mounting to windshields and other nonporous surfaces as well as a B-size medium socket arm Made of powder-coated, marine-grade aluminum and high-strength composites for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware Suction Size: 3.3" Diameter Socket to Socket Length: 3" Ball Size: B Size (1") Weight Capacity: Standard Use: 2lbs/Heavy Duty Use: 1lb Materials: Marine-grade aluminum, high-strength composite Weight: 0.87lb Compatibility: Apple iPad mini 4 Apple iPad mini 5

RAM® X-Grip® Large Phone Mount with RAM® Twist-Lock™ Suction Cup Base Ideal for vehicle windshields, the RAM-B-166-C-UN10U consists of a 3.3" diameter RAM® Twist-Lock™ suction cup base, long length double socket arm, and the popular spring-loaded RAM® X-Grip® large phone holder. The RAM® X-Grip® features an 'X' design that expands and contracts to provide a perfect fit for your device – even if it's in a case. Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite, this large version of the RAM® X-Grip® fits phones ranging from 1.75" to 4.5" in width and keeps your device completely functional and accessible. RAM® ball and socket technology allows for near-infinite adjustability to achieve the ideal viewing angle – while also extending the life of your phone by providing shock and vibration damping. For outdoor applications, the RAM® X-Grip® includes a device tether that is recommended for added security and peace of mind.  Features: Spring-loaded 'X' design for large phones with rubber caps sports great holding power without hiding your phone; includes optional device tether for peace of mind during rugged use Includes RAM® Twist-Lock™ suction cup base ideal for vehicle windshields and long length, B size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware, (1) Optional Tether, (1) Glue Tube for Rubber Caps Holder Dimensions: Width Range: 1.75" - 4.5", Depth Range: .875" max  Suction Size: 3.3" Socket-to-Socket Length: 5.31" Ball/Socket Size: B Size (1") Weight Capacity: 2lbs Materials: Marine-grade aluminum, High strength composite, Stainless steel

Twist-Lock™ Suction Cup Mount w/Universal X-Grip® Large Phone/Phablet Cradle The RAM-B-166-UN10U consists of a 3.3" diameter suction cup twist lock base, STANDARD length double socket arm and universal spring loaded X-Grip® cradle for large phones and phablets. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob, allows you to move the mount to your optimum viewing position. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your phone or phablet. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Cradle Dimensions Minimum Width = 1.75" (Minimum Height = 5.5") Maximum Width = 4.5" (Minimum Height = 3.25") Depth = 0.875" Features: Rustproof High strength composite and stainless steel construction Spring loaded cradle expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable Socket technology allows for multiple adjustment angles and articulation of device Includes Tether for open cockpit and extreme environments Lifetime warranty Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. RAM highly recommends using the provided Tether for all open cockpit applications while using this product.

Twist-Lock™ Suction Cup Mount with EZY-Mount™ Quick Release Adapter This single suction cup mount (RAM-B-166-326U) was designed in collaboration with OtterBox Hardline Series for industrial applications. This kit includes a B-size RAM® Twist-Lock™ suction cup base, a medium-length socket arm, and a RAM® EZY-Mount™ Quick Release Adapter for OtterBox Hardline Series. With the quick-release tab, simply push the tab to dismount the tablet without having to adjust the mount itself. The RAM-B-224-1U suction cup base consists of a 3.3" diameter RAM® Twist-Lock™ suction cup connected to a RAM-B-238U diamond base with a 1" B-size rubber ball. The RAM® Twist-Lock™ suction cup base is a fan favorite for use on vehicle windshields and provides an extra-strong hold on any smooth, non-porous surface. Features: RAM® Twist-Lock™ suction cup base is ideal for vehicle windshields and other nonporous surfaces includes a B-size medium-length socket arm and RAM® EZY-Mount™ Quick Release Adapter for OtterBox Hardline Series Quick-release adapter with release tab for easy docking and removal of devices wrapped in an OtterBox Hardline Series case Backed by a lifetime warranty Specifications: Hardware Included: Assembly hardware Suction Size (inch) 3.3” diameter  Socket to Socket Length (inch): 3” Hole Pattern (inch):  2-Hole AMPS: 1.912” Ball Size (inch): B size (1”) Weight Capacity: The standard use is 2.0 lb. and the heavy-duty use is 1 lb. Materials: Marine-grade aluminum, high-strength composite, and cast acrylic Weight: 0.75 lb.

RAM Twist Lock Suction Cup Mount with Long Double Socket Arm and Diamond Adapter The RAM-B-166U-C consists of a 3.25" suction cup locking base, LONG double socket arm and diamond base end. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. This mount does not require any drilling for installation.

RAM Twist Lock Suction Cup Mount w/Universal X-Grip Cell Phone Holder The RAM-B-166-UN7U consists of a 3.25" twist lock suction cup base, double socket system and universal spring loaded X-Grip holder for cell phones. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included X-Grip cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip holder expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip is the cell phone holder evolved. Compatible Devices (WITH OR WITHOUT CASE): Apple iPhone 6 Apple iPhone 5s Apple iPhone 5c Apple iPhone 5 Apple iPhone 4 Apple iPhone 4 Apple iPhone 3GS Apple iPhone 3G Apple iPhone Apple iPod touch (All Models) Apple iPod (G1-G5) Samsung GALAXY S4 Samsung GALAXY S5 The X-Grip holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Holder Dimensions: Minimum Width = 1.875" Maximum Width = 3.25" Depth = 0.875" Features: 1. Rustproof 2. High strength composite and stainless steel construction 3. Spring loaded holder expands and contracts for perfect fit of your device 4. Rubber coated tips will hold device firm and stable 5. Socket technology allows for multiple adjustment angles and articulation of device 6. Lifetime warranty 7. Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

Double Twist-Lock™ Suction Cup Mount w/Tab-Tite™ Universal Spring Loaded Cradle f/Apple iPad 1-4 with or without Light Duty Case The RAM-B-189-TAB3U consists of a double 3.3" twist lock suction cup base, double socket arm, round base adapter and Tab-Tite™ universal clamping cradle. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The spring loaded Tab-Tite™ cradle makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Height: 8.5" to 11.125" Width: 6.38" to 7.75" Depth: 0.13" to 0.56" Features: 1. Support cups contain open slots to accommodate for tablets of various sizes 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. High strength materials maximize longevity of cradle 6. Full access to all ports 7. Lifetime warranty 8. Made in the U.S.A. Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 1.8 lbs.

RAM® Twist-Lock™ Suction Cup Mount with Universal Action Camera Adapter The RAM-B-166-GOP1U consists of a 3.3" diameter suction cup twist lock base, STANDARD length double socket arm and 1" diameter ball with custom GoPro® Hero adapter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including adhesive disks. The GoPro® Hero adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket.  Features: Assembly Hardware Included Suction Size: 3.3" Socket-to-Socket Length: 3" Ball/Socket Size: B Size (1") Weight Capacity: 2lbs Materials: Marine-Grade Aluminum/Hight Strength Composite

RAM® Twist-Lock™ Suction Cup Mount for Apple MagSafe This RAM® MagSafe Adapter is designed specifically to fit the official Apple MagSafe Charger with the added benefit of RAM® Mounts compatibility. This adapter allows a perfect and secure fit for the MagSafe's charging disk and is only compatible with the iPhone 12 and iPhone 13 series, with or without an official Apple MagSafe case. Included in this kit is the RAM® Twist-Lock™ B size suction cup base with a B size medium length socket arm, perfect for windshield mounting in your vehicle. Take advantage of your iPhone 12's and iPhone 13's magnetic MagSafe charging abilities with this MagSafe mount. Features: MagSafe mount adapter designed specifically for MagSafe charging disk (not included) Includes RAM® Twist-Lock™ suction cup base ideal for vehicle windshields and medium length, B size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability Compatible with iPhone 12 and 13, Pro, Pro Max, and mini, with or without Apple MagSafe phone cases; not compatible with standard phone cases Backed by a lifetime warranty Specifications: HARDWARE INCLUDED: Assembly Hardware SUCTION SIZE: 3.3" Diameter SOCKET-TO-SOCKET LENGTH: 3" BALL/SOCKET SIZE: B Size (1") WEIGHT CAPACITY: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb MATERIALS: Marine-grade aluminum, High strength composite WEIGHT: 0.52 lbs.

Twist-Lock™ Suction Cup Mount with Universal X-Grip® Cradle for 12" Large Tablets The RAM-HOL-UN11U is compatible with the iPad Pro WITHOUT CASE ONLY. The RAM-B-166-UN11U consists of a 3.3" diameter suction cup twist lock base, double socket arm, round base adapter and universal X-Grip® clamping cradle for 12" tablets. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The X-Grip® clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® clamping cradle expands and contracts for perfect fit of most 12" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip®. The X-Grip® cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Cradle Dimensions Minimum Width = 7.25” Maximum Width = 8.75” Maximum Length (WITHOUT additional supports) = Unlimited Maximum Length (WITH additional supports) = 10.25” Depth = 0.875" Features: Spring loaded cradle expands and contracts for perfect fit of your tablet Rubber coated tips will hold your tablet firm and stable Socket technology allows for multiple adjustment angles and articulation of your tablet Easy access grip knobs, located on the back of the cradle for quick release of your tablet Multiple mounting access points on the back of the cradle Additional support keeper at the bottom of the cradle Full access to all ports Lifetime warranty Material: Powder Coated Marine Grade Aluminum and Marine Grade Stainless Steel Components Note: The "U" in the part number reflects product packaged in poly bag.

Twist-Lock™ Suction Cup Mount w/Universal X-Grip® Cradle for 10" Large Tablets The RAM-B-166-UN9U consists of a 3.3" diameter suction cup twist lock base, double socket arm, round base adapter and universal X-Grip® clamping cradle for 10" tablets. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The X-Grip® clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip®. The X-Grip® cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Cradle Dimensions Minimum Width = 6.25" Maximum Width = 8.1" Depth = 0.875" Features: Spring loaded cradle expands and contracts for perfect fit of your tablet Rubber coated tips will hold your tablet firm and stable Socket technology allows for multiple adjustment angles and articulation of your tablet Easy access grip knobs, located on the back of the cradle for quick release of your tablet Multiple mounting access points on the back of the cradle Additional support keeper at the bottom of the cradle Full access to all ports Lifetime warranty Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.