|
RAM Dark Green Sun Visor - 50% Tint
The RAP-393-BL1U consists of a dark green sun visor: 50% tint. The injection molded RAM sun visor is an industry first, offering ideal blockage of glare while ensuring no obstruction or distortion of view. With three mounting points, attach the sun visor to the EZY-Mount quick release suction cup mount, easily configured for left or right hand as well as pilot and co-pilot use.
Sun Visor Dimensions:
8" x 13"
Material:
Poly(methyl methacrylate)
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
34.94 |
|
|
Ram Mounts
Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.
If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.
|
|
|
J-BRAID x4 Braided Line - 40lb - 300 yds - Dark Green
J-BRAID x4 is perfect for abrasion resistance and ease of use for knot tying and line management. The 4-carrier lends itself to being a bit thinner in diameter, making it great for adding additional lines to the reel when necessary. x4 is made with the highest-quality Dyneema material from Japan. Daiwa's proven high standard of manufacturing makes J-Braid one of the best on the market today. J-BRAID™ DARK GREENDark green is more natural in situations where you may want to tie your hook or lure directly onto the line without a leader.
Specifications:
Length: 300yds
Lb. Test: 40 lb.
Kg Test: 19 kg
Diameter: 0.011 in.
Diameter: 0.029 mm
Mono Diameter: 10 lb.
Spool: Filler Spool
Color: Dark Green
Description: 4 Strand Weave
|
17.11 |
|
|
Tab-Tite™ Cradle f/8" Samsung Galaxy Tab A & S2 8.0 w/Case
The RAM® Tab-Tite&$153; spring loaded, quick release cradle offers a secure fit with easy access to the mounted tablet. The interchangeable cup ends are designed specifically for the Samsung Galaxy Tab A 8.0, Tab A 8.0 with S Pen Tab S2 8.0 with Otterbox Defender case. The spring loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions.
Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
Cradle Dimensions:
Height: 8.25" to 11"
Width: 5" to 5.88"
Depth: 0.3" to 0.67"
Features:
Support cups are designed to offer access to ports and tablet functions
Modular design makes upgrading to a new tablet simple and cost effective
Dual-spring loaded tension provides secure support for your tablet
Easy, quick release of your tablet for on-the-go applications
Versatility of cradle allows for attachment to many RAM mounting solutions
Lifetime warranty
Made in U.S.A.
Material:
High Strength Composite
Weight:
0.69 lbs.
|
24.59 |
|
|
Locking Case f/Garmin dezl™ 770LMTHD
The RAM-HOL-GA70LU is a high-strength composite locking case for the Garmin dezl 770LMTHD. RAM has designed a form-fit cradle that supports the device and protects it from vibration. We have also molded in a sun visor to shield the screen and the diamond hole pattern allows the attachment to all RAM components or mounts that contain the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM mounting products, this locking case is ready to compliment your GPS and become the most useful accessory in your vehicle.
Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
Locking Case Features:
Open access to all electronic ports including speaker, microphone, and SD slots
High strength materials ensure product longevity
Form fitted cradle supports and protects device without vibration
Built in visor prevents glare on screen
Integrates the factory Garmin magnetic dock for charging
Locks device in place so it cannot be removed without the use of tools
Lifetime warranty
Made in the U.S.A.
Specifications:
Material: High Strength Composite
The "U" in the part number reflects product packaged in poly bag.
Weight: 0.55 lbs.
|
27.36 |
|
|
3-Tray Tackle Box w/Dual Top Access - Dark Green Metallic/Off White
Plano's classic one-, two- and three-tray tackle boxes feature a cantilever tray design that extends open to showcase the contents. A sturdy fold-down handle makes the case easy to carry and store while the brass bailed latch tightly secures the lid, keeping items protected and organized.
Features:
3 Cantilever Tray w/14-25 Compartments
Brass Bailed Latch
Two Top Access Storage Areas
Dimensions: 14.25"L x 8.5"W x 8.125"H
|
21.20 |
|
|
Portable Navilight 360° 2NM Rescue - Glow In The Dark - Green w/Bendable Suction Cup Mount
The Navilight 360° Rescue Edition 2NM - US Coast Guard approved for 2 nautical miles is based on the Navi light 360° 2NM and includes a 360° All-round light, 225° Masthead light, 135° Sternlight, Flashing light, Anchoring light and a Cabin light. Additionally it is fitted with a glow in the dark circle around the switch. These unique glow pigments glow for 8 hours after only 10 minutes of exposition to daylight. This and the emergency green color of the body, makes Navi light 360° Rescue Edition 2NM extremely easy to locate, day and night. It uses super bright LED light, is water proof, floats and attaches almost anywhere through its double magnetic mounting system.
Examples of usage:
*Based on the Convention on the International Regulations for Preventing Collisions at Sea, commonly called 72 COLREGs
In a vessel of 12M or more in length but less than 50M in length:
As Sternlight
As Flashing light
As All-round light
In vessels of less than 12M in length:
As Masthead light
As Sternlight
As All-round light
Specifications:
USCG Approval, 2 Nautical Miles
5 Modes: 360° All-round light, 225° Masthead light, 135° Sternlight, Flashing light, Anchoring light, Cabin light
Floatable, waterproof (20M) and air-tight
Includes magnet bracket, mounting screw, 3 lanyards for multiple fixing and securing
Powered by three AAA batteries (not included)
Size: H = 35mm, Diameter = 68mm
Weight (net): 115g
Modes / approximate burn time:
16 white LED, 360° All-round light, Anchoring light / 15hrs
16 white LED, 360° Flashing light / 85hrs
10 white LED, 225° Masthead light / 24hrs
6 white LED, 135° Sternlight / 32hrs
4 white LED, 360° Cabin light / 72hrs
Bendable Suction Mount
Designed to allow secure mounting of the Navi lights with magnetic base on any kind of smooth and flat surfaces. The quick release suction cup releases with just one push of the lever so it can be stored quickly or mounted to another place or boat.
Examples of Usage:
Navigation lights should be mounted so that they are not covered by the vessel's superstructure or may interfere with deck lights. The bendable suction mount can be easily used to mount the magnetic Navi lights at:
The outboard engine
The steering console, the windshield or any place on the hull where the lights are seen best
On canoes and kayaks with a smooth and flat surface
Specifications:
Secure suction cup base
Quick release suction cap
Bendable shaft moves through 180°
Self adhering plastic mounting plate Diameter = 75mm for secure mounting on rough surfaces
Size: L = 68mm, H = 157mm
Weight (net): 80g
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
127.78 |
|
|
J-BRAID x4 Braided Line - 20lb - 300 yds - Dark Green
J-BRAID x4 is perfect for abrasion resistance and ease of use for knot tying and line management. The 4-carrier lends itself to being a bit thinner in diameter, making it great for adding additional lines to the reel when necessary. x4 is made with the highest-quality Dyneema material from Japan. Daiwa's proven high standard of manufacturing makes J-Braid one of the best on the market today.
J-BRAID™ DARK GREEN
Dark green is more natural in situations where you may want to tie your hook or lure directly onto the line without a leader.
Specifications:
Length: 300yds
Lb. Test: 20 lb.
Kg Test: 9.5 kg
Diameter: 0.008 in.
Diameter: 0.21 mm
Mono Diameter: 6 lb.
Spool: Filler spool
Color: Dark green
Description: 4 strand weave
|
17.11 |
|
|
J-BRAID x4 Braided Line - 10 lbs - 300 yds - Dark Green
J-BRAID x4 is perfect for abrasion resistance and ease of use for knot tying and line management. The 4-carrier lends itself to being a bit thinner in diameter, making it great for adding additional lines to the reel when necessary. x4 is made with the highest-quality Dyneema material from Japan. Daiwa's proven high standard of manufacturing makes J-BRAID one of the best on the market today.
J-BRAID™ Dark Green
Dark green is more natural in situations where you may want to tie your hook or lure directly onto the line without a leader.
Specifications:
Length: 300 yds
Lb. Test: 10 lbs
Kg Test: 4.8 kg
Diameter: 0.007 in.
Diameter: 0.17 mm
Mono Diameter: 2.5 lbs
Spool: Filler spool
Color: Dark Green
Description: 4 strand weave
|
17.11 |
|
|
J-BRAID x4 Braided Line - 65 lbs - 300 yds - Dark Green
J-BRAID x4 is perfect for abrasion resistance and ease of use for knot tying and line management. The 4-carrier lends itself to being a bit thinner in diameter, making it great for adding additional lines to the reel when necessary. x4 is made with the highest-quality Dyneema material from Japan. Daiwa's proven high standard of manufacturing makes J-BRAID one of the best on the market today.
J-BRAID™ Dark Green
Dark green is more natural in situations where you may want to tie your hook or lure directly onto the line without a leader.
Specifications:
Length: 300 yds
Lb. Test: 65 lbs
Kg Test: 30 kg
Diameter: 0.014 in.
Diameter: 0.136 mm
Mono Diameter: 16 lbs
Spool: Filler spool
Color: Dark Green
Description: 4 strand weave
|
17.86 |
|
|
J-BRAID x4 Braided Line - 15lb - 300 yds - Dark Green
J-BRAID x4 is perfect for abrasion resistance and ease of use for knot tying and line management. The 4-carrier lends itself to being a bit thinner in diameter, making it great for adding additional lines to the reel when necessary. x4 is made with the highest-quality Dyneema material from Japan. Daiwa's proven high standard of manufacturing makes J-Braid one of the best on the market today.
J-BRAID™ Dark Green
Dark green is more natural in situations where you may want to tie your hook or lure directly onto the line without a leader.
Specifications:
Length: 300 yds
Lb. Test: 15 lb.
Kg Test: 7 kg
Diameter: 0.008 in.
Diameter: 0.19 mm
Mono Diameter: 4 lb.
Spool: Filler spool
Color: Dark green
Description: 4 strand weave
|
17.11 |
|
|
1.5" Double Ball Mount with Hardware for Garmin Striker + More
The RAM-101-G4 consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and round adapter base that attaches directly to the back of the Garmin echo. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Included is hardware that is used to attach the Garmin echo to the RAM Mount.
This mount is compatible with the following Garmin devices:
Striker 4
Striker 4dv
Striker Plus 4cv
echo 100
echo 150
echo 300c
ECHOMAP Plus 42cv
ECHOMAP Plus 43cv
ECHOMAP Plus 44cv
ECHOMAP Plus 45cv
Ball Size:
1.5" Rubber Ball Size
Material:
Powder Coated Marine Grade Aluminum
Product Dimensions
Overall Height: 5"
Socket-To-Socket Length
3"
Hole Pattern
4-Hole AMPS: 1.181" x 1.496"
3-Hole 120-Degree: 1.812" Diameter
Note:
Part number reflects product packaged in clear clam shell for store shelf display.
|
51.37 |
|
|
RAM Mount Strap Mount w/Arm & Diamond Base
Rail Accommodation Dimensions:
Mount with Strap: 1.57" to a maximum of 3.15"
Mount with U-Bolt: 0.50" to a maximum of 1.25"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
Note:
Part number reflects product packaged in clear clam shell for store shelf display.
|
37.09 |
|
|
Fishfinder Mount for Lowrance Hook2 Series - 1" Track Mount
Designed for light duty fresh water use, this B size (1”) Track Ball™ kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the included adapter to the Lowrance Hook² and you’re ready to connect the double socket arm and base to virtually any track system including the RAM® Tough-Track™. Made of high strength composite and powder coated marine grade aluminum, this kit is designed to keep your Hook² secure and stable in rugged environments on your kayak or inflatable.
T-Bolt Dimensions:
.48" x .95"
Material:
High Strength Composite and Marine Grade Aluminum
Ball Size:
1" Rubber Ball Size
Note:
Part number reflects product packaged in a retail bag store shelf display.
|
34.94 |
|
|
RAM Transducer Arm Mount with Male Wedge Base and 1" Ball: Compatible with Hobie and Scotty Wedge Hole Bases
Kayak fishing is all about adaptability. RAM Mount offers the widest selection of kayak fishing accessories to adapt to a wide range of fishing scenarios. RAM now offers a deployable transducer arm for kayaks. This solution enables the quick and effective deployment and retrieval of your transducer, while protecting your transducer from damage. Perfect for kayak applications, the transducer arm can quickly be retrieved if you enter shallow water or when beaching your kayak. With little effort, the arm can quickly be moved to a different kayak and attached to an existing flush mount or 1" RAM ball. The unique design provides a universal solution for virtually any kayak as well as any transducer.
Compatible Transducers:
The RAM transducer arm mount is compatible with all transducers that contain a 1/4" screw.
Features:
1. 18" rigid aluminum rod can be bent to position your transducer to its optimum viewing location
2. Patented socket technology allows for quick raising, lowering, removal and stowage of transducer arm
3. Quality materials prevent corrosion and keeps your transducer arm mount
4. Compatible with Hobie and Scotty wedge bases
5. Lifetime warranty
Material:
High Strength Composite and Aluminum Steel
Ball Size:
1" Rubber Ball "B" Size
Note:
Part number reflects product packaged in clear clam shell for store shelf display. Transducer device not included with purchase.
|
54.77 |
|