|
RAM 2" Max Width Square Rail Base with 1" Diameter Ball
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
22.44 |
|
|
RAM 3" Max Width Square Rail Base with 1" Diameter Ball
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
34.32 |
|
|
RAM 1.5" x 3" Rectangle Base w/1" Ball
The RAM-B-202U-153 contains a 1" diameter rubber ball connected at right angles to a 1.5" x 3" rectangular base. This mount has pre-drilled holes at each corner of the base plate.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. Mounting hardware not included with purchase.
|
11.93 |
|
|
RAM 2" x 2.25" Rectangle Base with 1" Ball
The RAM-B-202U-225 contains a 1" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. Mounting hardware not included with purchase.
|
13.33 |
|
|
RAM 1.5" x 2" Rectangle Base with 1" Ball
The RAM-B-202U-152 contains a 1" diameter rubber ball connected at right angles to a 1.5" x 2" rectangular base, With a 1" x 1.5" 4-hole pattern. This mount has pre-drilled holes at each corner of the base plate.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. Mounting hardware not included with purchase
|
16.93 |
|
|
RAM Chrome Motorcycle Brake/Clutch Reservoir Base w/1" Ball
The RAM-B-309-1CHU connects to your handlebar clutch/brake clamp, left or right side, and holds one 1" diameter mounting ball. The chrome base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-1CHU base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58".
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
34.28 |
|
|
RAM Motorcycle Brake/Clutch Reservoir Cover Base with 1" Ball Offset
The RAM-B-346U base fits cleanly over your existing brake/clutch reservoir cover with the 1" ball offset. Made of die cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
19.54 |
|
|
RAM 2" x 1.7" Base with AMPs and 1" Ball for the Garmin zumo, TomTom Rider & Urban Rider
The RAM-B-347U base consists of a 1" diameter rubber ball connected at right angles to a 2" x 1.7" square base. The base has four pre-drilled holes at each corner, making the universal 1.5 x 1.188 (hole spacing) AMPS hole pattern.
This adapter/base is designed to hold the following devices:
Garmin zumo 400
Garmin zumo 450
Garmin zumo 500
Garmin zumo 550
Garmin zumo 660
TomTom Rider 2
TomTom Urban Rider
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
7.79 |
|
|
Triple Magnetic 2.5" Round Base with 1" Ball
Consists of a 1" diameter rubber ball connected to a flat 2.5" diameter base and triple magnetic base adapter. The 2.5" diameter base contains pre-drilled holes, including the universal AMPS hole pattern. The magnetic base adapter contains 3 rare earth magnets that hold firm to ferrous metals. Simply put this product near the mounting surface and feel it almost jump out of your hand. The composite adapter designed to conceal the magnets is made of durable composite to prevent scratching the mounting surface. Ideally suited for many applications, you're sure to find many ways to use your magnetic mount at work, home, on the go, or at play.
|
21.70 |
|
|
RAM 6.25" X 2" Rectangle Base with 1" Ball
The RAM-B-111BU consists 1" diameter rubber ball connected to a flat 6.25" x 2" rectangle base. The base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
The RAM-B-111BU is compatible with the following electronic devices:
Garmin GPSMAP 162
Garmin GPSMAP 168
Garmin GPSMAP 175
Garmin GPSMAP 180
Garmin GPSMAP 180C
Garmin GPSMAP 182
Garmin GPSMAP 185
Garmin GPSMAP 188
Garmin GPSMAP 232
Garmin GPSMAP 238
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. This plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
|
13.99 |
|
|
Ram Mounts
Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.
If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.
|
|
|
RAM 2" x 2.5" Rectangle Base with 1.5" Ball
The RAM-202U-225 consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
14.87 |
|
|
RAM 1.5" x 3" Rectangle Base with 1.5" Ball
The RAM-202U-153 consists of a 1.5" diameter rubber ball connected at right angles to a 1.5" x 3" rectangular base. This mount has pre-drilled holes at each corner of the base plate.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
13.74 |
|
|
RAM 1.5" x 2" Rectangle Base with 1.5" Ball
The RAM-202U-152 consists of a 1.5" diameter rubber ball connected at right angles to a 1.5" x 2" rectangular base. This mount has pre-drilled holes at each corner of the base plate.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
16.64 |
|
|
RAM 1/4"-20 Female Threaded Hole with 1" Ball
The RAM-B-348U includes a 1/4"-20 female thread connected to a 1" rubber ball.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
8.57 |
|